Topic: SMOS Linux 3.0.14 Plug-In & Mine - Stability, security and performance - page 9. (Read 94595 times)

How about undervolting cards on this? I am planning to run 4 R9 290's using SMOS

Hey guys,

  I switched 1.3 over to sgminer and when sgminer loads it freezes and gives this error

API running in local read access mode on port 4028 (14)

  Any idea what I need to do to fix this.

  Phad.

All videos is here http://www.smos-linux.org/video/

This is video for you https://www.youtube.com/watch?v=Nq5opAqxaIQ

please send video url

'keccak' is new scrypt-algo for maxcoin and others to soon follow.

Thanks for your answer.

what is the "linux command" in order to update ATI drivers ? if I have SMOS 1.1 installed - for exmple - and I'm not near the rigs....

try it with apt-get
i made video tutorial how to configure autostart script, you can see it in video section.
send me that cgminer, i must try it, keccak is for?

no more then 2GB.

for 5x290 cards, with intensity=19-20, how many RAM memory do i need?
of course SMOS system,

2GB of RAM or more than that?

Love the OS! Not a linux user, but I'm trying
thx

some comments:
- wonder if there is a way to install wine
- when adding a new application, there seems to be no default launch configured, no application launcher'
- can we add support in cgminer for keccak?

thx

Hello,

I have some problems with SMOS 1.3 on my new rig. It contains 2 X R9 - 280X sapphire toxic GPU's. When i start cgminer the GPU s want start mining.

I boot SMOS on a flash device. I configured everything like explained on your website via ssh. When i start the mining proces the problem is there. Here is a picture of whats going on :  http://imgur.com/3xQ236x

When i do the command ./cgminer -n this is the output : http://imgur.com/bVxEwsT  . ERROR  ADL Initialisation Error! Error -21!

When i login to the GUI via the webbrowser, it says that there are problems with my 2 GPU' s : http://imgur.com/u8fncqb


Any advice on how to solve this problem is welcome. I tried recompiling cgminer but that doesn't change anything.

Thanks.

All configs on web is from other users. So i cant guarantee its 100% correct. So start with memory and core, tc too.

So have the example configuration you posted on the SMOS site been tested? I just used those setting because I figured you or another user had tested for some time. If it's a GPU configure issue do you have any suggestions on where to start? Core?? Memory?? Intensity??? Thanks.

7950s go easy on SMOS too, but cant configure very stable for all cards. You need some time to configure good config for your card. When you do it, that will be nice.

Tried SMOS for the first time with three brand new Sapphire 279x cards. I used the config that's on the SMOS site. Consistently for the last day or so I have one card failing on me after any where from an hour to a few hours into mining. It's hash rate slows then it dies. The other two cards are hashing well around 470-480kh/s with few problems. I thought it might be a power problem so I hooked up one card to a separate PSU (one card on a 650 and the other two on an 860). That didn't seem to help. I do a coldreboot and sometimes it reboots no issues other times it reboots and gpumon or cgminer just don't work. I've double, tripple, quadruple checked the connectors, the power cables, ect. Not sure what other problem solving steps with this I should take. The cards do seem to work when the systems finds them and mining actually starts.

My only other experience with mining is another rig I set up with BAMT running two 7950s. I think I got spoiled there because it was SOOO easy to setup and has given me almost no problems and I'm hashing about 650kh/s per card on average. These 270s on SMOS have been nothing but headaches. Anyone having similar issues with 270x's?

Specs:
Asus M5A99X EVO mobo
Samperon 145
4gb ram
3  x apphire DUAL-X AMD Radeon R9 270X OC 2GB GDDR5
650w evga & 860w seasonic
mobo has 5 pci-e slots (three 16s, two 1s) and i'm using slot 1 (16) with riser, slot 3 (1) with riser and slot 5 (16) no riser
interesting slot 2 which is a 1 slot is not recognized by the OS at all, tried plugging into this one and the card didn't show up at all when i logged in

Any ideas? Anyone... Beuler??

thxs!

another question :-)

is it possible to give commands to individual cards?
"gpu-engine" : "1000-1000,1060-1060,1060-1060,1090-1090,1060-1060,1000-1000",
should run a few of the cards on higher clocks then other, but in reality in the browser they all say 1060Mhz
(and my 2 cards who run a bit hotter start running at 100% fan so it's not only a display thing, the are running all on 1060 Mhz)

@blackbird

Its all writed here http://www.smos-linux.org/donate/

I will record tutorial today how to access to your rig from outside.

Some time after minig starts something adds 50 pool records to cgminer.
Its look like

I have 17 cards mining on various hardware old and new. With the h81 btc pro motherboard this boots almost instant and has few problems , on an older 965t motherboard it wont even boot. When it comes to video cards i have 2 r9 280x cards that have lost 200kh/s per card on version 1.3 , my 7850's don't seem to even care which version they are on.

I like smos linux 1.3 but will use 1.2 untill the next release since it's not supposed to be based off bamt .

i installed cgminer kalroth but cant get graph on web monitor...any fix for this

Hi, I am running 5 7870s.

Does anyone have a good config for this?

Do I just use the config from hardware comparison wiki?