Pages:
Author

Topic: 💥SOLARIS XLR💥100% PoS + Masternodes ⚡Zerocoin⚡txbit.io in development - page 70. (Read 308915 times)

jr. member
Activity: 169
Merit: 2
Looks like all is ok after block 293996. Very good work from dev and all team who continue to do best job for Solaris. Already get masternode payments.
All things likely fixed, and we have stayed at the third week of Solaris signature campaign. Hope that Solaris Dev will expand the campaign a little more weeks.

zXLR works to ... i´ve got now my first zXLR and can send them to ... so all works fine.

I dont know how exact it works because i´ve tried 2 different ways now ... but it works.

I keep you informed when i know exactly or Dev will give the exact Info.

So the Pools must be filled with 3 Positions from 3 Different Wallets.

Example:

3 different Wallets have to mint 1 zXLR ... than the others can get 1 fresh zXLR

Also 3 different Wallets must hold 5 zXLR than the others can get 5 fresh zXLR.

... and so on.

I´ve send 3 x 1 zXLR to 3 different of my Nodes and now i can claim all 3 x 1 zXLR.

Please correct if im wrong.
member
Activity: 140
Merit: 12
I tried to remove info from the solaris.conf file in the local wallet, and from the file masternode.conf in the VPS wallet, as you suggested. After I tried to start the alias in the local wallet, the wallet showed me an error message.

Can you post a screenshot of the error message (make sure to remove/change any private key etc if that shows up in the error message).


It produces the next error message when I try to restart the alias:

Alias: ***
Failed to start masternode.
Error: Invalid IP address ********, masternode=********************************************

The initial problem was:


Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue? 


Did you restart the wallets after you got rid of the info?. Also are you starting the master node via the console?.
jr. member
Activity: 165
Merit: 3
When are deposits on Cryptobridge starting? My coins have been stuck for 3 or 4 days now...
hero member
Activity: 1414
Merit: 516
I tried to remove info from the solaris.conf file in the local wallet, and from the file masternode.conf in the VPS wallet, as you suggested. After I tried to start the alias in the local wallet, the wallet showed me an error message.

Can you post a screenshot of the error message (make sure to remove/change any private key etc if that shows up in the error message).


It produces the next error message when I try to restart the alias:

Alias: ***
Failed to start masternode.
Error: Invalid IP address ********, masternode=********************************************

The initial problem was:


Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue? 


You have to set your info on solaris.conf and on masternode.conf file as write on guide and after run command
Code:
startmasternode all false
on your local wallet and wait with wallet open at least 1 hour
jr. member
Activity: 169
Merit: 2
Looks like all is ok after block 293996. Very good work from dev and all team who continue to do best job for Solaris. Already get masternode payments.
All things likely fixed, and we have stayed at the third week of Solaris signature campaign. Hope that Solaris Dev will expand the campaign a little more weeks.

zXLR works to ... i´ve got now my first zXLR and can send them to ... so all works fine.

I dont know how exact it works because i´ve tried 2 different ways now ... but it works.

I keep you informed when i know exactly or Dev will give the exact Info.
newbie
Activity: 13
Merit: 0
I tried to remove info from the solaris.conf file in the local wallet, and from the file masternode.conf in the VPS wallet, as you suggested. After I tried to start the alias in the local wallet, the wallet showed me an error message.

Can you post a screenshot of the error message (make sure to remove/change any private key etc if that shows up in the error message).


It produces the next error message when I try to restart the alias:

Alias: ***
Failed to start masternode.
Error: Invalid IP address ********, masternode=********************************************

The initial problem was:


Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue? 

hero member
Activity: 1414
Merit: 516
Looks like all is ok after block 293996 263996. Very good work from dev and all team who continue to do best job for Solaris. Already get masternode payments.
member
Activity: 140
Merit: 12
I tried to remove info from the solaris.conf file in the local wallet, and from the file masternode.conf in the VPS wallet, as you suggested. After I tried to start the alias in the local wallet, the wallet showed me an error message.

Can you post a screenshot of the error message (make sure to remove/change any private key etc if that shows up in the error message).
newbie
Activity: 13
Merit: 0
Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue?  




It sounds like you have masternode info in your solaris.conf file of your local wallet so when that closes it shuts down the masternode, The local wallet should have info in masternode.conf file and NOT solaris.conf and the VPS wallet should have info in Solaris.conf and NOT masternode.conf.


I tried to remove info from the solaris.conf file in the local wallet, and from the file masternode.conf in the VPS wallet, as you suggested. After I tried to start the alias in the local wallet, the wallet showed me an error message.
jr. member
Activity: 169
Merit: 2
How long takes it time to can send new Zerocoin from Wallet ?

At "Total Zerocoin Balance" i can see my Coins but i cant send them to another Wallet.

And "Zerocoin Balance" shows me:

Unconfirmed: less the 20 confirmations.
Immature confirmed, but less then 3 mints of the same denomination after it was minted.

I´ve got created zXLR before 12 Hours.



PS: I´m happy that i am back on track with 10 Solaris Masternodes again Smiley

I think i understand now ... must wait that other People also zXLR minting in the same Amounts what i do minting because the zXLR Control Shows me "Needs 2 more mints added to Network" ... so than the Network can mix the Coins.
newbie
Activity: 13
Merit: 0
Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue?  




It sounds like you have masternode info in your solaris.conf file of your local wallet so when that closes it shuts down the masternode, The local wallet should have info in masternode.conf file and NOT solaris.conf and the VPS wallet should have info in Solaris.conf and NOT masternode.conf.


Thank you for your response, but it's mentioned in the official guide that both files should be copied in the VPS wallet:

"Copy the contents from the masternode.conf file on your machine and paste them into the Terminal (right click on mouse). Make sure the line you added is also there.

Exit the file by pressing CTRL+X. Press Y to confirm and hit Enter to save.

Now type:

nano /root/.solaris/solaris.conf

Copy the contents from your local solaris.conf file and paste them into the terminal. Exit and Save the file by pressing CTRL+X, Y and Enter."

https://docs.google.com/document/d/1Z3h_qA7N3-KMA1ECxyfDbBO-_lG7Hkrp_8Iy0s2iUMI/edit#

jr. member
Activity: 169
Merit: 2
How long takes it time to can send new Zerocoin from Wallet ?

At "Total Zerocoin Balance" i can see my Coins but i cant send them to another Wallet.

And "Zerocoin Balance" shows me:

Unconfirmed: less the 20 confirmations.
Immature confirmed, but less then 3 mints of the same denomination after it was minted.

I´ve got created zXLR before 12 Hours.



PS: I´m happy that i am back on track with 10 Solaris Masternodes again Smiley
sr. member
Activity: 861
Merit: 281
Damn I preferred it when PoS rewards were .99 Solaris!

Still this is OK for now Cheesy

Likewise, was happy to get some good amount of XLR in a day or two of staking but progress is a must for the good of the community of Solaris as a whole!
legendary
Activity: 1974
Merit: 1077
^ Will code for Bitcoins
not so much rewards on masternode... 7000$ and receive 13$/day.. not so big, but better than nothing.. hopefully the price will go up.
What about staking? anyone know the potential rewards of staking? is there some formula to do for understand what we will receive as reward for staking in future?

4700$ yearly on 7000 is "not much"? Sounds like a tremendous ratio to me. Where would you get such returns in traditional investment vehicles?

Staking statistics will probably start to show after several weeks of Proof of Stake. Ask around then..

Above that this ratio will be kept no matter whichever way price goes. Only way it can change is if XLR reach maximum node number, and for that to happen a lot of people have to buy a lot of coins to form a masternode, and in this case price would have to go much higher.
member
Activity: 91
Merit: 12
Solaris & ZeroCoin & txbit.io exchange ! Go !!!
Damn I preferred it when PoS rewards were .99 Solaris!

Still this is OK for now Cheesy
It's good to hear that staking process has worked. However, I am a little bit curious about how many coins did you stake and how long did you wait till receiving first staking rewards.
Thank you.
full member
Activity: 299
Merit: 100
Damn I preferred it when PoS rewards were .99 Solaris!

Still this is OK for now Cheesy
member
Activity: 140
Merit: 12
Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue?  




It sounds like you have masternode info in your solaris.conf file of your local wallet so when that closes it shuts down the masternode, The local wallet should have info in masternode.conf file and NOT solaris.conf and the VPS wallet should have info in Solaris.conf and NOT masternode.conf.
member
Activity: 147
Merit: 12
Smart guys will buy Solaris now, or a little bit lower. It's too late to buy Solaris when txbit.io released. Buy  Solaris when it has been still a potential coin, not when it become a giant, top 10 in the coinmarketcap website.
After txbit.io released, I think the coin can hit $100 for sure.
Hehe, nice tip. Thank you. I have bought Solaris immediately after reading your thread and spending several minutes to look at Solaris project, its released products, current progresses, and potential. Honestly, Solaris seems to be good project in crypto world, which is abudant with scam ones.
newbie
Activity: 13
Merit: 0
Hi Solaris community,

I'm trying to set up a masternode on VPS http://time4vps.eu/ by following the latest guide, and everything looks fine in the local and VPS wallets (it's enabled, protocol 70717, the command getinfo on VPS shows that the block is the lastest one), but the active time is always 0 in my local wallet. After I close my wallet for few hours and open it again, the masternode has the status 'missing', even if the masternode still works correctly on VPS (I checked it with the command getinfo). I tried to reindex, but the active time is always zero and after few hours with closed local wallet it is 'missing' again.

Any suggestions how to fix this issue?  


member
Activity: 476
Merit: 14
Bcnex - The Ultimate Blockchain Trading Platform
Smart guys will buy Solaris now, or a little bit lower. It's too late to buy Solaris when txbit.io released. Buy  Solaris when it has been still a potential coin, not when it become a giant, top 10 in the coinmarketcap website.
After txbit.io released, I think the coin can hit $100 for sure.
Pages:
Jump to: