Topic: [SOLD] Great deal on Avalon A6's... (Read 1946 times)

Yup, I sold them all in the first few days. 

Wasn't this sold months ago ?

Would you be interested in shipping entire racks?

Got busy with the solar array yesterday.  I sent a release pm today

solar array link https://bitcointalksearch.org/topic/solar-array-starting-to-look-good-1369207

Cool, feel free to run it overnight.  Glad to hear it's hashing well - as with all hardware, some run a bit better and some a bit less than others, looks like you got one from the bit better batch.    In general I found the A6's to be very consistent in terms of performance, and I love how they're designed and work as a cluster.

Oh, and technically it's not MY A6, it's YOUR A6 that has that nice hash rate. 

my avalon6 has arrived.

I would like to run it over nite then ask OgNasty to release funds to you.  you are DNA d057

the one on the bottom

and you appear to have the best hash rate of all my gear.

They're all gone, thanks to all that picked one up.  If you missed out on these, and you're interested in some new in box Batch 6 S7's, I have 14 that I'll be posting up probably today.  I'll be selling them for 2.15 BTC shipped, which is effectively the same $/GH as these A6's.  PM me if you're interested!

I also think I'll have a couple RPi's and USB controllers, so if you're interested in those I'll be posting about them as well - not sure how many there will be (probably 6 or so), but I'll probably be looking for 0.15 BTC each for those (shipped) - and I'll also have some of just the USB adapters that anyone buying a Pi set can get for an additional 0.05 BTC (I think I have 4 or 5 of these).  PM if you want some, and make sure to say how many you'd want as they'll be first come first served.

Thank you

Yup, it will go out with the others tomorrow, and I'll PM the tracking number to you!

The rack is something I custom built, it's actually both a rack and a plenum, meaning it takes all the exhaust air and isolates it - but you still need to have extractor fans to 'pull' the air out.  Works REALLY well, as long as you make sure the exhaust fans have enough static pressure.  It actually has a manometer on it that shows the pressure differential between the room and plenum, so it's really easy to see if you need more fan power or not.

The v2 rack you see in the pictures handles 32 miners (4x8) - my v3 rack, which is the same physical size, handles 40 miners (5x8), and is pretty much the limit as far as density goes.  The rack itself is about 6 feet tall, 3 feet wide and about 1 foot deep, and is aluminum with fiber board (heat rated) inserts.  The v2 rack requires you to remove a side beam (easy) to remove miners, as they slide in and lock from the side - whereas the v3 then kind of lock in place from the front, making them easier to maintain.

We're keeping most of them, but I would sell either of my test ones (one v2 and one v3).  I suspect it wouldn't be cheap to ship, even though it breaks down into parts and is just re-assembled.  I could also ship it without the fiber board inserts, which you could just get made at home depot, and that would probably drop the shipping cost considerably.  If you're serious about it, then feel free to PM me.

 When you ship this to me  please let me know.


https://blockchain.info/tx/f8dc08b76a24024302b767c1eceba341735d626590974c895b03682bd031a8dc


this was my tx id to OgNasty

What rack are you using?
Are you selling the rack?

NOoooo 

yeah looking forward to getting this one.

ahahaha you could not resist. 

PM Sent for two.

I have 6 left, 5 with philipma's purchase, so if you're on the fence, now's the time to get off it. 

I sent a pm

At this point it looks like they're almost all sold - so if you are interested, contact me first before starting escrow with OgNasty.  Once I ship out the ones today and go through them all, I'll post how many are left.

pm sent