Topic: [SOLD OUT] 1.45 BTC Antminer S1 180GH/S Shipps on Feb 13 (Price Protection) - page 20. (Read 63774 times)

What happens after 3 months? Do the miners get free delivery to location of choice?

Anyone want to buy me out for 6.15-whatever it's paid me out already? It is up and running here http://eligius.st/~wizkid057/newstats/userstats.php/1DwdJkxjcQ8b4KYvnKvEkhWawA61SGghUE You should be able to get the comped mining back to the 14th because I sent the info that was used to set up the miners long before that. I have three miners hosted with sushi review for  three months each. I will forward all it mines until sushi-review gets it pointed to a new pool of your selection.

I'll take it at 1.45 BTC original price

U can casuade the PWM fan with the stock fan and all fan speed controlled by 1 blade.

If I am told no refund because the miners are online after I asked for the refund after being told i did not send the miner info after I sent the miner I will flip. Still waiting for any reply from any channel.

i will buy it for 1.2 btc since it is used 

After being told I did not supply the information for the miners I asked for a refund. My miners magically came online without me supplying any new info. I still want the refund I requested. I contacted you through every channel available to me before the miners were set up. Please take the miners offline and send the difference in BTC to my address. I don't enjoy playing games like this, please, just refund the order.

just got my box thanks sushi!

Yes that will work, or use a 3-pin-to-molex adapter and plug into the PSU. A lot of fans come with those, if you have fans around, you probably got the adapters, look for them.

If you can just plug em directly into the PSU.  I've been buying the Antec 120's and they come with the adapter to connect directly to the PSU.  After you get it cooled down you can decide whether or not to bump it to 375.  I let two run for several days before making the switch.

Thanks for the info, smooth!  I happen to have several spare 120x120x25 fans with 3-pin connectors.  I guess I just need to shave off the ridges to fit it into the 4-pin connector on the 2nd S1 blade.

You don't really need a pwm fan as there is no fan control on the second blade anyway. Just get a regular fan and hook it up directly the PSU.

I got my S1 -- opted to pick it up at the UPS Customer Center yesterday afternoon (Monday).  The lazy UPS dude cost me three days of hashing through the weekend.  He left an InfoNotice sticker late last Friday afternoon outside the building and never went in to knock or ring at my door (I was home).  He sure was in a hurry to get off work for Valentines Day.  Lesson to be learned: keep tabs on your UPS dude if you're expecting a delivery from them as they would slack off if given the chance.

Well, at least I finally got the S1 going Monday evening.  But first, I had to prep them as I always have with other miners.  I tightened all the heat sink screws and cleaned off the excess TIM that got squeezed out and wiped off the oily substance on the PCB with pure anhydrous isopropyl alcohol (99.953%) and paper towel.  I also cleaned the heat sink fins with an air duster and brushed off the accumulated lint/dust between the fan and the fins.

It's hashing at 179.41 GH/s and drawing 382W at the wall with a Corsair CX500 PSU that barely gets warm at 71% load (of course, jumped with the superior thermostat wire instead of a mere paper clip   ).  Temps are 42/44 with an ambient room temp of 26.7C.  I'm shopping around for a reasonably priced second PWM fan to do "pull" duty.  Any suggestion?

After hashing for 21 hours or so, I got the following stats:



Are these figures within tolerance?  Do I just simply divide "Rejected" and "HW" by "Accepted" to get the respective percentage?  BTW, what is "Utility" and "Discarded" and are they supposed to be figured in somehow to get a more accurate percentage?

Thanks, sushi!

Whats the refund policy for a unit which has malfunctioned day two? Does Sushi honour or do we go to Antminer? Had 3 Xs most of the day reset Ant as stated on the troubleshooting guide by Dogie and now powers up can get into the miner via browser but no miner status everything else is as it should be just no flashing lights no no clicking just ZERO hashes! of deerey deerey me. PM'd Sushi but as others have been waiting with several more miners with hosting issues and not had a response I doubt I will get one. So wondering where to turn to now does Bitmain honour warranties anyone had any experience of this and returns with them?

Thanks

F

Not feeling optimistic just played a game of 5 am email tag asking for my miner password for eligius. I know part of the issue is how I write, but this isn't what I expected. I found the website first and how this is being carried out is very different than what I expected. Please just refund my order and sell to an eager and  willing buyer.

Any s1 stock left or those ?

 SCAM WARNING sushi-gb is FAKE
https://bitcointalksearch.org/topic/scam-warning-sushi-gb-is-fake-470657

I wrote in  PM Sushi, asked about his Skype, because when i looking his email, gives two accounts, i asked what the correct? Answer is no until now, a request on Skype was no answer so far.

anyone else wanna give up their set?

It's "sushi review"   yes...  there is a space between sushi and review