SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 123.

11th_miner

newbie

Activity: 2

Merit: 0

Quote from: dragonmike on October 22, 2018, 05:45:34 AM

Quote from: hesido on October 22, 2018, 05:39:51 AM

I'd like to share my latest windows clean install adventure:

8x 8MB Rx580's all OC settings the same for each try

Windows 10, build 1703 + 18.3.2 = very good on 1.6.7, good on 1.6.8 (CN-Heavy Hashrate maxes out at 8600 h/s) -Sometimes crashes on algo change, all cards maxes h/s
Clean install of Windows 10, build 1803 + recommended driver 18.6.1 = shit (7600 h/s)
Clean install of Windows Enterprise, build whatever + recommended driver 16.8.1 = somewhat shit (7800 h/s)
Windows Enterprise + 18.3.2 = good (8200 h/s) -> This is what I'm doing right now. Seems to be stable on algo change, although randomly 2-4 cards would hash at shit speeds.

So the newer windows builds are shit, and Adrenalin 18.6.1 is not doing me any favors. Couldn't try 18.5.x with so much downtime biting my ass.
I'm not hashing v8 anymore because I'm losing to much hash with the 18.6.1 drivers, even on clean windows installs.

Anxiously waiting for the new version, I hope Doktor can do his magic once again.

What intensities are you running the cards at?
I just lowered my Vegas from 120 to 112. Not too sure why I thought going higher for v8 was ever going to be a good idea... just followed blindly what was written here as "suggestion".

So far all the Vegas are hashing fine - I isolated my flaky card and run slightly lower clocks and higher voltage on it to be on the safe side. So touch wood, I think I've solved my problems...

I have vega 64 and I had same problem, rig was stable for 6 to 18 hours and then crash, first tought it was power issue and removed one card from rig but same problem,managed to find a flaky card (which wasn't flaky on v7 ,maybe it is not flaky) removed it and again crash; lowered the intensity to 116, after 24 hours so far so good

livada

newbie

Activity: 417

Merit: 0

Quote from: ripcurrent on October 21, 2018, 10:01:48 PM

Quote from: livada on October 21, 2018, 03:14:04 PM

Quote from: dragonmike on October 21, 2018, 12:08:12 PM

Quote from: livada on October 21, 2018, 11:07:02 AM

Quote from: dragonmike on October 21, 2018, 10:38:05 AM

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

what does your full system pull from the wall ? with V8 not just the cards

yes. this is 1 rig(6card + 6 extra fan from the wall)

Bojcha

hero member

Activity: 848

Merit: 500

For those who have problems with FE
HBBC=OFF(any vega) and Largepags=ON

Amigo9881

newbie

Activity: 14

Merit: 0

Quote from: N2DCRYPT on October 21, 2018, 02:27:30 PM

Quote from: doktor83 on October 21, 2018, 01:55:25 PM

Quote from: EscapeV3locity on October 21, 2018, 12:27:21 PM

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

The problem is i don't have a FE, so i can't really do anything

Not your fault Dok, it's not the miner, it's more a driver thing. Thanks for your patience, I'm sure the complaints get old after a while.
And double thanks for your continued development on what I believe is the best cryptonight miner around!

To those w/ FEs:

driver: win10-64bit-radeon-pro-software-enterprise-18.q3.1-oct1

But a couple of tricks you have to use to pull it off:

1. go into global settings and turn off HBCC memory.
2. if using SRBMiner, you have to have --enableduplicategpuid in the bat file, and then double up the threads in the config file for V8. I'm using 124 for intensity and 16 for worksize.

FE still the king, hashing V8 @ ~2125 H/s

one other thing: use the precompiled kernel that comes with SRBMiner, do not compile the kernel with the new drivers.

confirmed: When turning off hbcc Vega FE gets 2125

but when miner switch algo to heavy, vega FE is getting `500 h/s

how did you solve this ?

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: hesido on October 22, 2018, 05:39:51 AM

I'd like to share my latest windows clean install adventure:

8x 8MB Rx580's all OC settings the same for each try

Windows 10, build 1703 + 18.3.2 = very good on 1.6.7, good on 1.6.8 (CN-Heavy Hashrate maxes out at 8600 h/s) -Sometimes crashes on algo change, all cards maxes h/s
Clean install of Windows 10, build 1803 + recommended driver 18.6.1 = shit (7600 h/s)
Clean install of Windows Enterprise, build whatever + recommended driver 16.8.1 = somewhat shit (7800 h/s)
Windows Enterprise + 18.3.2 = good (8200 h/s) -> This is what I'm doing right now. Seems to be stable on algo change, although randomly 2-4 cards would hash at shit speeds.

So the newer windows builds are shit, and Adrenalin 18.6.1 is not doing me any favors. Couldn't try 18.5.x with so much downtime biting my ass.
I'm not hashing v8 anymore because I'm losing to much hash with the 18.6.1 drivers, even on clean windows installs.

Anxiously waiting for the new version, I hope Doktor can do his magic once again.

What intensities are you running the cards at?
I just lowered my Vegas from 120 to 112. Not too sure why I thought going higher for v8 was ever going to be a good idea... just followed blindly what was written here as "suggestion".

So far all the Vegas are hashing fine - I isolated my flaky card and run slightly lower clocks and higher voltage on it to be on the safe side. So touch wood, I think I've solved my problems...

hesido

jr. member

Activity: 158

Merit: 5

I'd like to share my latest windows clean install adventure:

8x 8MB Rx580's all OC settings the same for each try

Windows 10, build 1703 + 18.3.2 = very good on 1.6.7, good on 1.6.8 (CN-Heavy Hashrate maxes out at 8600 h/s) -Sometimes crashes on algo change, all cards maxes h/s
Clean install of Windows 10, build 1803 + recommended driver 18.6.1 = shit (7600 h/s)
Clean install of Windows Enterprise, build whatever + recommended driver 16.8.1 = somewhat shit (7800 h/s)
Windows Enterprise + 18.3.2 = good (8200 h/s) -> This is what I'm doing right now. Seems to be stable on algo change, although randomly 2-4 cards would hash at shit speeds.

So the newer windows builds are shit, and Adrenalin 18.6.1 is not doing me any favors. Couldn't try 18.5.x with so much downtime biting my ass.
I'm not hashing v8 anymore because I'm losing to much hash with the 18.6.1 drivers, even on clean windows installs.

Anxiously waiting for the new version, I hope Doktor can do his magic once again.

Amigo9881

newbie

Activity: 14

Merit: 0

Quote from: peteris-apse on October 22, 2018, 03:33:13 AM

monero v8 made some instability to my vega rig so i lovered intensity from 120 to 100. Little less hasharate, but it is stable for few days.
12800 h/s on 7x vega 56 rig
1100w
1800-1850 hs on per card.

Can you please share your ppt table ? my wattages are too high.

Thanks

Dowper_

member

Activity: 221

Merit: 12

When I start the miner all my RAM fulls up and the rig crashes, any ideas?

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: livada on October 21, 2018, 03:14:04 PM

Quote from: dragonmike on October 21, 2018, 12:08:12 PM

Quote from: livada on October 21, 2018, 11:07:02 AM

Quote from: dragonmike on October 21, 2018, 10:38:05 AM

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

Ah you haven't flashed them, ok.
Still pretty good all together. And the hash/power ratio is nice.

R4fik

newbie

Activity: 8

Merit: 0

Hey guys anyone have good Do you have nice settings for rx570? I used 40 pieces rx 570 and could not run properly

peteris-apse

jr. member

Activity: 98

Merit: 1

monero v8 made some instability to my vega rig so i lovered intensity from 120 to 100. Little less hasharate, but it is stable for few days.
12800 h/s on 7x vega 56 rig
1100w
1800-1850 hs on per card.

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: N2DCRYPT on October 21, 2018, 02:27:30 PM

Quote from: doktor83 on October 21, 2018, 01:55:25 PM

Quote from: EscapeV3locity on October 21, 2018, 12:27:21 PM

Vega FE miner performance is horrible compared to where it should be. It’s not just this miner but other miners have the same performance issue. Just wondering if the mining dev team is looking into this.

The problem is i don't have a FE, so i can't really do anything

Not your fault Dok, it's not the miner, it's more a driver thing. Thanks for your patience, I'm sure the complaints get old after a while.
And double thanks for your continued development on what I believe is the best cryptonight miner around!

To those w/ FEs:

driver: win10-64bit-radeon-pro-software-enterprise-18.q3.1-oct1

But a couple of tricks you have to use to pull it off:

1. go into global settings and turn off HBCC memory.
2. if using SRBMiner, you have to have --enableduplicategpuid in the bat file, and then double up the threads in the config file for V8. I'm using 124 for intensity and 16 for worksize.

FE still the king, hashing V8 @ ~2125 H/s

one other thing: use the precompiled kernel that comes with SRBMiner, do not compile the kernel with the new drivers.

i use the tool to turn hbcc off thats not my issue, I am using the 18.5.2 drivers(may) though
what does enableduicategpuid do , can you post your full batch file fir FEs and your config setting?

also how do you force the use of precmplied kernels, Srb always compiles kernels on startup

thanks

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Liam_Howlett on October 22, 2018, 01:43:49 AM

Quote

doktor83

How to write "max_difficulty" if all parameters are in bat ?

Quote

SRBMiner-CN.exe --config Config\config.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 26,26,26,26,26 --cgputhreads 2,2,2,2,2 --cgpuworksize 32,32,32,32,32 --cpool pool.supportxmr.com:7777 --cwallet "wallet" --cpassword x

"keepalive"
"job_timeout"
"max_difficulty"

Can't be set in cmd, but it's not a bad idea to implement them

jazz1984

jr. member

Activity: 392

Merit: 5

Quote from: Yanakitu Tenatako on October 21, 2018, 08:10:59 AM

Anyone with AMD R9 380 cards?

I was getting 600hash with v7 now 485hash only.
Any better results?

What it is your overclock settings? config.txt?
You can try { "id" : 0, "intensity" : 60, "worksize" : 16, "threads" : 1}
or { "id" : 0, "intensity" : 30, "worksize" : 16, "threads" : 2}
then gradually increase or decrease intencity, finding best hashrate.
Here discussing tahiti hashrates, may be you can find some useful info: https://bitcointalksearch.org/topic/m.47101597

Liam_Howlett

newbie

Activity: 51

Merit: 0

Quote

doktor83

How to write "max_difficulty" if all parameters are in bat ?

Quote

SRBMiner-CN.exe --config Config\config.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 26,26,26,26,26 --cgputhreads 2,2,2,2,2 --cgpuworksize 32,32,32,32,32 --cpool pool.supportxmr.com:7777 --cwallet "wallet" --cpassword x

Kgonla

newbie

Activity: 129

Merit: 0

What is the worksize supposed to do?

I tested with one RX 580 4GB from W1 to W64 & the H/s is exactly the same not even 1 H/s up or down.

ripcurrent

member

Activity: 160

Merit: 10

Quote from: livada on October 21, 2018, 03:14:04 PM

Quote from: dragonmike on October 21, 2018, 12:08:12 PM

Quote from: livada on October 21, 2018, 11:07:02 AM

Quote from: dragonmike on October 21, 2018, 10:38:05 AM

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

what does your full system pull from the wall ? with V8 not just the cards

Bael

jr. member

Activity: 87

Merit: 2

Hi

I'm trying to use the SSL/TSL connection in nanopool and it does not work.

I added this line in the file pools.txt "pool_use_tls": true and I have put port 14433

But it never works for me.

Do you know what the problem could be?

Greetings guys!

livada

newbie

Activity: 417

Merit: 0

Quote from: dragonmike on October 21, 2018, 12:08:12 PM

Quote from: livada on October 21, 2018, 11:07:02 AM

Quote from: dragonmike on October 21, 2018, 10:38:05 AM

I'm just struggling with the Vegas.
Doesn't seem to matter whether I increase voltage or lower clocks, after a few minutes mining Monerov8, all GPUs go boom, i.e. SRBminer says hashrate is zero for every single card... and it will fail automatic re-initialisation.

Using 120/16/2. They're all 56's flashed to 64.
Maybe I'm just at the limit of what the PSU is able to cope with... Power draw is between 1400 and 1435 for a EVGA 1500 G2...

hmm .Mybe. my 6 nitro+ vega 56 use 1170W on V8 and 970W on V7 from the wall. i have 2*750W PSU and all work...

just try mining with 5 vega.

just del last gpu { "id" : 5, "intensity" : 120, "worksize" : 16, "threads" : 2},

and try.

if work your PSU is problem

1170W from the wall? That's pretty good... What frequencies and voltages are you using? I know I've got one card that's struggling but I have yet to find time to isolate it and test with different frequencies & voltages. Anything under Mem_P3@975mV will not initialise it.

6*vega56 nitro+ (hynix) - GPU: 1498/900mv MEM: 929/936/958mhz -900mv (3 card work with 958mhz - 2card 936mhz 1 card 929mhz -all use 900mv

V7 970W(11650HR) - V8 1270W(11120HR) - FAST 1020W(22600HR) - Heavy 940W(9110HR) - TUBE 960W(9380HR)

livada

newbie

Activity: 417

Merit: 0

what is this?

https://image.prntscr.com/image/-hx_HgYBTx_z0rDnbLCYLw.jpg
DATA IS LARGER THAN BUFFER ?
all work last 60 day without any error and now send this

rig go on next pool and again send this.

i try other rig other internet location and send again.

try 1.8.6. 1.8.4

any idea?

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 123. (Read 237261 times)