Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 133. (Read 237261 times)
October 18, 2018, 08:25:19 AM
Hello, I have RX 550 2G and before with monerov7 I had 498h / s, now I have monerov8 415h / s. Before the Auto intensity was 25 in V7 and now in V8 it is auto 26
October 18, 2018, 08:21:37 AM
did anyone release a video card in supportxmr.com
miner AMD GPU Miner V1.6.8
bat file?
miner AMD GPU Miner V1.6.8
bat file?
Quote
SRBMiner-CN.exe -o stratum+tcp://pool.supportxmr.com:5555 -u 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbRwhsZffhrHA6Shmehm -p change:[email protected] --auto --config Config\config-normalv8.txt
pause
pause
October 18, 2018, 08:20:34 AM
Doc, Switch over worked great, thx for your continued support...
Do we need to tweak any of the setting for V8 or will the v7 work well?
meaning card settings..
Do we need to tweak any of the setting for V8 or will the v7 work well?
meaning card settings..
Not the same settings, depending on the card the intensity is about the same as on V7, but the worksize 8 isn't working out very well for V8, 16 or 32 is usually better.
October 18, 2018, 08:18:45 AM
Auto switch worked like a charm 
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
Would you be able to provide directions on how to do this?
Thanks
open http://127.0.0.1:21555 (this is the default port, if you changed it, use that port) in the browser, and if it 'shows you some text data' then the API is working OK.
October 18, 2018, 08:17:38 AM
I have switched in v8 from v7 work well and I can confirm a little bit less Hashrate.
v7 I had about 3030 Hs
v8 I have 2950 Hs
Thank you Doc.
EDIT: v8 I have 2920 Hs
v7 I had about 3030 Hs
v8 I have 2950 Hs
Thank you Doc.
EDIT: v8 I have 2920 Hs
October 18, 2018, 08:01:28 AM
Doc, Switch over worked great, thx for your continued support...
Do we need to tweak any of the setting for V8 or will the v7 work well?
meaning card settings..
Do we need to tweak any of the setting for V8 or will the v7 work well?
meaning card settings..
October 18, 2018, 08:00:49 AM
Auto switch worked like a charm
Guys, we are now mining V8
Well, I'm on MoneroOcean and I'm still mining CNfast... So not too sure if they've implemented the fork correctly or whether they just havent't got enough profitability data for XMRv8 yet... Guys, we are now mining V8
October 18, 2018, 07:55:46 AM
Auto switch worked like a charm
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
Would you be able to provide directions on how to do this?
Thanks
October 18, 2018, 07:54:05 AM
Somebody mining in NiceHash?
October 18, 2018, 07:41:58 AM
rx550 2G on 1.6.8:
v7 - 500 H/s
v8 - 400 H/s
Is it ok?
v7 - 500 H/s
v8 - 400 H/s
Is it ok?
October 18, 2018, 07:41:04 AM
Happy Fork 
October 18, 2018, 07:35:49 AM
Auto switch worked like a charm
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
Guys, we are now mining V8
@NCarter84 , if miner works then API web server works too. When you think it crashed, open the api port in the browser, to check does it return json.
October 18, 2018, 07:28:30 AM
Anyone have any issues with the API randomly crashing? I'm using it to remote back hash details to ETH Monitoring and it will just go flat. Restart of the miner typically fixes it, but doing that 3-5 times a day is troublesome.
October 18, 2018, 07:20:17 AM
Hello XHV - Haven miners
I'm running an 8gpu rig, MSI Armor RX570 8GB cards, on 1190/2200 clocks, and using the last version of SRBminer but can't reach the 1.000+ h/s on any of my cards
Is here anyone with the same/similar setup running stable on higher clocks?
the cards are not bios modded, using the last drivers & compute mode on & MSI afterburner
I'm running an 8gpu rig, MSI Armor RX570 8GB cards, on 1190/2200 clocks, and using the last version of SRBminer but can't reach the 1.000+ h/s on any of my cards
Is here anyone with the same/similar setup running stable on higher clocks?
the cards are not bios modded, using the last drivers & compute mode on & MSI afterburner
October 18, 2018, 05:44:14 AM
test rx550\2gb 12 gpu rig 1150\800 1800\820
v7 460 h\s each card 480 watt from wall
v8 380 h\s 520 watt
v7 460 h\s each card 480 watt from wall
v8 380 h\s 520 watt
October 18, 2018, 05:06:23 AM
I try to run 1.6.8 with 6XR9 390. The driver version is 16.9.2 Windows 8.1
I try to benchmark the normal V8.
But it did not run. It has
error: Unknown attribute kind (45)
Anybody can help?
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2
At first try to use recommended driver. Don't use 18.3.4 and older drivers...I try to benchmark the normal V8.
But it did not run. It has
error: Unknown attribute kind (45)
Anybody can help?
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2
PS 87 blocks till fork.
October 18, 2018, 04:38:11 AM
October 18, 2018, 04:19:41 AM
I try to run 1.6.8 with 6XR9 390. The driver version is 16.9.2 Windows 8.1
I try to benchmark the normal V8.
But it did not run. It has
error: Unknown attribute kind (45)
Anybody can help?
---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.6.8
DevFee ~0.85%
Press 's' to get some stats
Press 'h' to get some hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2
Please wait...
CryptonightV8 mode enabled
Benchmark mode
[2018-10-18 10:11:41] Heating up system, please wait...
[2018-10-18 10:11:42] Compiling kernel for DEVICE BUS ID 6 ...
error: Unknown attribute kind (45)
Press any key to continue . . .
cmd line
SRBMiner-CN.exe --config Config\config-normalv8.txt --runbenchmark
config-normalv8.txt
{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
}
I try to benchmark the normal V8.
But it did not run. It has
error: Unknown attribute kind (45)
Anybody can help?
---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.6.8
DevFee ~0.85%
Press 's' to get some stats
Press 'h' to get some hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Please use : Adrenalin 18.5.1, 18.5.2 or 18.6.1 drivers
Total pools: 2
Please wait...
CryptonightV8 mode enabled
Benchmark mode
[2018-10-18 10:11:41] Heating up system, please wait...
[2018-10-18 10:11:42] Compiling kernel for DEVICE BUS ID 6 ...
error: Unknown attribute kind (45)
Press any key to continue . . .
cmd line
SRBMiner-CN.exe --config Config\config-normalv8.txt --runbenchmark
config-normalv8.txt
{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
}
October 18, 2018, 04:15:51 AM
So there is no way to get it to work with older AMD drivers like 15.12 ? This is on Windows 7.
Basically starting the start.bat or the SRBMiner-CN.exe results in an instant exit and doesn't even provide an error. Checked the log file and nothing was created.
Basically starting the start.bat or the SRBMiner-CN.exe results in an instant exit and doesn't even provide an error. Checked the log file and nothing was created.
put a pause at the end of the start.bat so it won't close the window and you probably have a parse error in the config file.
Yes i've already tried this. Its basically completely blank. No error or anything. And there is no log file created either.
I am using AMD Drivers 15.12 on Windows 7. Wondering if anyone else has been succesful in getting these to work somehow.
are you using iGPU?
No its a headless rig, doesn't even have iGPU on the motherboard.
did you try xmr-stak? if that gets halted too then it's something messed up in drivers. I had an issue with all miners stuck and it was due to Opencl/driver issue.
Yes I tried some odd version of XMR-stak and it works with V8 however the max I can get is around 400hs with an R9 280X.
Since a Vega gets like 2000hs and a RX 570 gets 900hs, it's a horrible speed. Might be time to pack up the GPUs unless the speeds improve.
Adrenalin 18.5.1, Adrenalin 18.5.2, Adrenalin 18.6.1
I use 18.6.1 on win7x64. With some 17.xxx (dont remember exactly) was some troubles, after drivers updating works good. 7970 card (same as 280x).
October 18, 2018, 04:01:30 AM
Why the MD5 checksum on the website www.srbminer.com and in the first post of this thread is different?
On the website www.srbminer.com MD5: f5fa1db91d56ea63b09343e724bc82fc *SRBMiner-CN-V1-6-8.zip
On this thread: MD5: 9a88b36a8ef2d4116b158c25d06721f6 *SRBMiner-CN-V1-6-8.zip
On the website www.srbminer.com MD5: f5fa1db91d56ea63b09343e724bc82fc *SRBMiner-CN-V1-6-8.zip
On this thread: MD5: 9a88b36a8ef2d4116b158c25d06721f6 *SRBMiner-CN-V1-6-8.zip
Oh, i forgot to change it on the site, MD5 of the latest release is : 9a88b36a8ef2d4116b158c25d06721f6 *SRBMiner-CN-V1-6-8.zip
Edit: Fixed
Jump to: