Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 233. (Read 237263 times)

how much hash u get for haven using those set up? cuz somehow ive managed to get mine 1400ish per card about 8500 total altogether 1000w from the wall.

for cryptonight v7 i  was able to get 11,600 about 1930-1950 per card but cast XMR keeps crashing every single time like after 15mins (freezes) and stops mining etc.

so far i got the hashrate down and everything lol. mining haven has been stable though (using SRB miner for haven)

I don't know what happen but now 1.5.9 is taking more than 1 minute to start than 1.5.8
After "CryptonightV7 mode enabled" appears on screen it does nothing, just blinking cursor for more than one minute, before I can see "Heating up system" on screen

More things... Please look a the picture below:

https://fotos.subefotos.com/6320525eaee705ad0afc34beb29870c1o.jpg

I set difficulty to 40000 to test.
You can see at time 02:26:05 pool changes diff to 60000, the soft takes 13 seconds to see the pool diff change, at 02:26:18
OK this is not the important.
Now I press Ctrl+C to close the program, the "Please wait..." appears on screen, CPU usage goes from 0 to 66-67% & the program does not close, I must close from task manager.
This only happens when the max_difficulty command have been executed, if not with ctrl+C the program closes normaly.

Coin switchers are a meme. Very difficult to properly monitor accurate market data + nethash spikes with low latency.

Ahh that make sense, i've gotten -h from a recent version. Nice!
I don't see a way to pass it a specific device, though?

  -o, --url URL              pool url and port, e.g. pool.usxmrpool.com:3333
  -O, --tls-url URL          TLS pool url and port, e.g. pool.usxmrpool.com:10443
  -u, --user USERNAME        pool user name or wallet address
  -r, --rigid RIGID          rig identifier for pool-side statistics (needs pool support)
  -p, --pass PASSWD          pool password, in the most cases x or empty ""
  --use-nicehash             the pool should run in nicehash mode
  --currency NAME            currency to mine

It will be interesting to see how much the profitability of Haven goes up after that switch... or rather, how much the difficulty goes down once the NiceHash miners are cut off.

It seem this miner does not support passing args through cli. It instead require a config file?

It's working. Tyvm bro )) Best method  ! )

Don't want to hijack thread, but you set password on the srbminer's own config, it's passed onto the pool. However, if the pool needs special template different from other pools, you can add in the pool currency setting:
"passwordtemplate" e.g.
....
"host":"haven.miner.rocks",
"port":"7777",
"passwordtemplate": "w={%1}"
"url":"https://haven.miner.rocks/",
"api":"https://cryptoknight.cc/rpc/haven",
....

This is yet not documented and this is a new feature not present in the original repo.

If you have any further questions do not hesitate to contact me through direct message..


Guys, windows updated to 1803, everything is down the drain.. Any guidance to get back to mining ?!!!

Hi..

First.. Thanks for this solution!

Question: How can I set "password" for each pool?  (parameter required to use "worker" in each rig)

Could you give me an example?

Haven switch from Cryptonight Heavy next week to Cryptonight Haven (a slight variation on Heavy to shake Nice Hash influence). It would be nice to add this in now like you have with Stellite V4 so its ready to go at launch.

Sory kaj pisem na naski al prekomplicirano mi objasnit na engleski

Nakon  par dana testiranja  evo zakljucka.

Verzija 1.5.8 definitivno radi brze  od 1.5.9

Cak i 1.5.8. ako ne koristis "gpu_conf" : za svaku karticu posebno nikad nece upalit taj veci HR -to je cirka od 30-50 HR po kartici.
Verzija 1.5.9. nikad ama bas nikad nije dala taj veci HR.

Znaci pregledaj zasto verzija 1.5.8. ako zadajes pojedinacne gpu daje veci HR.
 i tada nekad moras 2-3 puta upalit minera al nakon toga daje veci HR

now after 3 days, when the gpu Crash, the Windows freeze...

The same behaviour on 1.5.8-1.5.9

Slow speed http://dl4.joxi.net/drive/2018/06/07/0020/0406/1319318/18/abbdd13a59.jpg

Fast speed on the same rig, but one card very slow.  http://dl3.joxi.net/drive/2018/06/07/0020/0406/1319318/18/7eeafe8096.jpg

This behaviour start from 1.5.6 version. Is it possible to run always on fast speed ))

from twitter:

Official Haven Protocol V3 Announcement Fork Date: 2:15 PM 14th June 2018 (NZDT/GMT +12) 2:15 AM 14th June 2018 (GMT) 10:15 PM 13th June 2018 (New York/GMT -4) 7:15 PM 13th June 2018 (California/GMT -7)
Block Height: 89200

Coin switching has been very necessary for me, I do manual switching though.

I may switch based on just difficulty alone without looking at price so I mine more of a coin, or I may switch to a valuable coin that I convert to BTC. I use this proxy so I'm able to switch coins using my mobile and it's quite inefficient when switching through a remote desktop solution and pressing "p" button to reach the coin you want, only to have your hashrate drop and wait for a few blocks to get it back up.

The automated one I'll try to do will let you decide based on difficulty (do not mine when difficulty is so high), or a combination of difficulty and price, and maybe something in between. I hope Doktor's version also takes account this, sometimes I don't care about the value of the coin, because as you say the price is very hard to determine (Solace, anyone? It switches between 2 or 3 satoshis massively deceiving the profit calculators, however, I just switch to it if I can mine enough of those, not looking at the price) And low hashrate coins are very vulnerable to pile-up's due to coin switching of mass hash-rate sources (nicehash etc.) so you may be getting very little half of the day until powers that be pile up on another coin. The (difficulty) / (weighted exchange rate) approach could be a nice compromise for switching (esp. for low hashrate / per block or small gap  difficulty adjusted coins)

I got that all wrong, as you say you dont need --algo in SRBminer.
So its probably a Spacepools problem as Cryptoknight pool works and they dont

there is no --algo parameter in SRBMiner, i think you are in the wrong thread lol

This is within the last hour Im getting these issues

Coin switchers are overrated.
None of them are giving you an edge. There's always going to be somebody who's faster or more powerful than you and will "steal" your blocks from all those useless Yiimp pools. Add to that the fact that you don't get proper market data (you usually only get "last paid price" from the exchanges as opposed to "bids"), and massive latency (hours!) between the moment the switcher decides a given coin is most profitable and the effective time your mined (and matured) coin finally gets exchanged, and the whole exercise is completely ludicrous.

The good trading/switching algos out there are already flattening the market. Look at the various profitability calculators online and check with your hashrate. On average, the profitability difference between the 5 top coins will be within a negligible 5%.

Spacepools just started to mine on main net again. They were mining empty blocks until this morning (so was MPH and probably a majority of other pools). They seem to have switched back to mining on the proper chain now so you should give it another go.