Author

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 355. (Read 237247 times)

member
Activity: 340
Merit: 29
seens slower than cast on vega 1500 mhs max

Is that for cn-heavy (monero / haven)?  That's the best I've been able to do w/ any miner since the fork.  Of course, cast doesn't support heavy yet.
full member
Activity: 1148
Merit: 132
seens slower than cast on vega 1500 mhs max
newbie
Activity: 24
Merit: 0
V1.2.3
- Fixed Nicehash extranonce thingy
- Fixed a bug with gpu_conf settings. Those forks screw things up
- Fixed devfee mining bug, again those forks..
- Added display of HW errors per thread


Perfect, no stale share for 5 minnute...
you are superman!
hero member
Activity: 2548
Merit: 626
V1.2.3
- Fixed Nicehash extranonce thingy
- Fixed a bug with gpu_conf settings. Those forks screw things up
- Fixed devfee mining bug, again those forks..
- Added display of HW errors per thread
member
Activity: 340
Merit: 29
Can you tell me if there is a chart of hashrate for Cryptonight heavy? or if Cryptonight heavy has same hashrate as cryptonight?
No. Your hashrate with cryptonight heavy is lower than cryptonight normal
My rig does 54xx h/s with cryptonight normal but only 43xx with cryptonight heavy so far


Crytonight heavy will be lower than cryptonight normal for any miner.

@docktor83 mine are 4gb cards.  I couldn't go higher than 59 on two threads; the miner hangs (perhaps too much load on CPU or low on virtual mem; didn't triage much)

This is not true.  Seems like this is the case for CPUs, and possibly any card w/ 4GB mem or less, but all my cards (except for an HD7950) are 8GB, and every one of those actually got about a 50H/s boost from CN-Heavy w/ xmr-stak.  Haven't tried this miner yet (but will soon for Vega, since those didn't fare as well.)

newbie
Activity: 1
Merit: 0
Doesn't work for my old 7970.
Just crashes if I set
Code:
"double_threads" : false
Gives an error
Code:
Error CL_INVALID_DEVICE when calling clCreateContext
if I set
Code:
"double_threads" : true
hero member
Activity: 2548
Merit: 626
i think you should improve the stats, which gpu is giving rejects/invalid, and the like.

also, im having a problem with errors:

accepted/total shares: 577/580 (and i cant find in the logs.txt whats causing the missing 3 shares)
network errors: 3 (maybe this is the reason?)

i think its related to error "pool is not responding"

is there something wrong with my setup?

i have 2 rigs connected with the same internet connection.

rig 1 doesnt have that problem, but rig 2 gave that error.

so i think its not pool related.

yes, those 3 shares were lost cause they couldn't be sent to the pool (pool not responding).
Probably connection was lost to the pool, nothing you can do about that.
newbie
Activity: 168
Merit: 0
i think you should improve the stats, which gpu is giving rejects/invalid, and the like.

also, im having a problem with errors:

accepted/total shares: 577/580 (and i cant find in the logs.txt whats causing the missing 3 shares)
network errors: 3 (maybe this is the reason?)

i think its related to error "pool is not responding"

is there something wrong with my setup?

i have 2 rigs connected with the same internet connection.

rig 1 doesnt have that problem, but rig 2 gave that error.

so i think its not pool related.
full member
Activity: 729
Merit: 114
If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

Yes probably that would be better idea.  Or just keep a count of the potential stale shares.  is there a way to figure out actual stale shares?

no that is something only the pool knows.
Also when diff is low jobs come very fast so thats another reason for stale shares.

Alright.  For some reason the miner just hangs on my 6xRX580 Rig regardless of intensity (tried 52, 45, 30).  It works fine with single thread, autointensity val=59.
newbie
Activity: 53
Merit: 0
newbie
Activity: 165
Merit: 0
Can someone provide me with info what files I need I see posts using gpu.txt file, yet I don't see that in ZIP of SRbminer.
So it would be great if someone can provide me with full files, I have 4x rx vega 64 cards and have no idea how to setup with this new algos.

Thanks
hero member
Activity: 2548
Merit: 626
If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

Yes probably that would be better idea.  Or just keep a count of the potential stale shares.  is there a way to figure out actual stale shares?

no that is something only the pool knows.
Also when diff is low jobs come very fast so thats another reason for stale shares.
hero member
Activity: 2548
Merit: 626
Rx 580 rig is mining monero at nanopool.Speed is only 740/card, lol, I've got 890/card with XMR stak 64.

when intensity is set at 0, the sw suggest an intensity of 124.
SO, I tried 121,122,123, etc to see the best intensity near it and to do so, I edit the gpuconf section
I've got 0 hashing speed on all threads, all the card.
I waited till all the screen became red. and then I stopped,

Reboot, intensity at 0, and it goes

changed to single gpu intensity, all red.

Reboot, all stock, the same thing.

thenI deleted all the *.srb

Reboot and  its the same.

First I tried at 0, then singles intensity and it doesn't work.

Last try I can do is : erase the *.srb, put everything stock, reboot, set intensity single and then launch WITHOUT launching intensity 0 first.

May be its trying to use the same *.srb (bin) just compiled for that intensity. I don't know
Later tonight I will try again

I want to help you so please copy paste result of this :

SRBMiner-CN.exe -listdevices (run from console)

I will make you a conf file for nanopool so you can try it.

edit:
looks like i maybe found a bug , will fix it and we will see
full member
Activity: 729
Merit: 114
If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀

Yes probably that would be better idea.  Or just keep a count of the potential stale shares.  is there a way to figure out actual stale shares?
hero member
Activity: 2548
Merit: 626
I am mining sumokoin and I am getting a lot of stale shares. Is this normal?

Rig is running Rx580 and RX480 cards.

Code:
[2018-04-06 02:31:04] Pool accepted result 0x00153E20 ( STALE )
[2018-04-06 02:31:04] Pool accepted result 0x0007CF5D ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x000F6E88 ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x001E821A ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x00046013 ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x001E8B0A ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x0001724C ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x000484FC ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x001507DC ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x0017D419 ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x001588C2 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000FC691 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000C7269 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0000AF8F ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x00000357 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0006D0CA ( STALE )
[2018-04-06 02:31:11] Pool accepted result 0x001D3E60 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x0012FE82 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x000A6D0F ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0002C7B9 ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0017F22F ( STALE )
[2018-04-06 02:31:14] Pool accepted result 0x0000F7E5
[2018-04-06 02:31:14] Pool accepted result 0x0004959F
[2018-04-06 02:31:15] Pool accepted result 0x001D970D ( STALE )
[2018-04-06 02:31:15] Pool accepted result 0x00051FEB
[2018-04-06 02:31:15] Pool difficulty: 22029
[2018-04-06 02:31:15] Pool sent a new job (ID: d5be)
[2018-04-06 02:31:16] Pool accepted result 0x00076367 ( STALE )
[2018-04-06 02:31:16] Pool accepted result 0x000856D2 ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x00082D0D ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x0000CB8F ( STALE )
[2018-04-06 02:31:21] Pool difficulty: 74383
[2018-04-06 02:31:21] Pool sent a new job (ID: d5b9)
[2018-04-06 02:31:21] Pool accepted result 0x000023DC ( STALE )
[2018-04-06 02:31:22] Pool accepted result 0x0002E9C4 ( STALE )
[2018-04-06 02:32:02] Pool accepted result 0x0000CD7D

If the share is accepted dont worry. Stale share is a result that was sent after a new job arrived, its just an indication, so if server dont accept it, it would be a rejected share. Dont worry about it, maybe ill just remove that indication so people wont worry without a reason 😀
jr. member
Activity: 330
Merit: 1
I am mining sumokoin and I am getting a lot of stale shares. Is this normal?

Rig is running Rx580 and RX480 cards.

Code:
[2018-04-06 02:31:04] Pool accepted result 0x00153E20 ( STALE )
[2018-04-06 02:31:04] Pool accepted result 0x0007CF5D ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x000F6E88 ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x001E821A ( STALE )
[2018-04-06 02:31:05] Pool accepted result 0x00046013 ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x001E8B0A ( STALE )
[2018-04-06 02:31:06] Pool accepted result 0x0001724C ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x000484FC ( STALE )
[2018-04-06 02:31:07] Pool accepted result 0x001507DC ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x0017D419 ( STALE )
[2018-04-06 02:31:08] Pool accepted result 0x001588C2 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000FC691 ( STALE )
[2018-04-06 02:31:09] Pool accepted result 0x000C7269 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0000AF8F ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x00000357 ( STALE )
[2018-04-06 02:31:10] Pool accepted result 0x0006D0CA ( STALE )
[2018-04-06 02:31:11] Pool accepted result 0x001D3E60 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x0012FE82 ( STALE )
[2018-04-06 02:31:12] Pool accepted result 0x000A6D0F ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0002C7B9 ( STALE )
[2018-04-06 02:31:13] Pool accepted result 0x0017F22F ( STALE )
[2018-04-06 02:31:14] Pool accepted result 0x0000F7E5
[2018-04-06 02:31:14] Pool accepted result 0x0004959F
[2018-04-06 02:31:15] Pool accepted result 0x001D970D ( STALE )
[2018-04-06 02:31:15] Pool accepted result 0x00051FEB
[2018-04-06 02:31:15] Pool difficulty: 22029
[2018-04-06 02:31:15] Pool sent a new job (ID: d5be)
[2018-04-06 02:31:16] Pool accepted result 0x00076367 ( STALE )
[2018-04-06 02:31:16] Pool accepted result 0x000856D2 ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x00082D0D ( STALE )
[2018-04-06 02:31:17] Pool accepted result 0x0000CB8F ( STALE )
[2018-04-06 02:31:21] Pool difficulty: 74383
[2018-04-06 02:31:21] Pool sent a new job (ID: d5b9)
[2018-04-06 02:31:21] Pool accepted result 0x000023DC ( STALE )
[2018-04-06 02:31:22] Pool accepted result 0x0002E9C4 ( STALE )
[2018-04-06 02:32:02] Pool accepted result 0x0000CD7D


Edit: it looks like it only happens on the first few minutes. The pool is probably adjusting  difficulty.

So far so good. Better hashrate than xmr-stak currently. I am getting 100H/s more on my cards than xmr-stak.
member
Activity: 476
Merit: 19
Rx 580 rig is mining monero at nanopool.Speed is only 740/card, lol, I've got 890/card with XMR stak 64.

when intensity is set at 0, the sw suggest an intensity of 124.
SO, I tried 121,122,123, etc to see the best intensity near it and to do so, I edit the gpuconf section
I've got 0 hashing speed on all threads, all the card.
I waited till all the screen became red. and then I stopped,

Reboot, intensity at 0, and it goes

changed to single gpu intensity, all red.

Reboot, all stock, the same thing.

thenI deleted all the *.srb

Reboot and  its the same.

First I tried at 0, then singles intensity and it doesn't work.

Last try I can do is : erase the *.srb, put everything stock, reboot, set intensity single and then launch WITHOUT launching intensity 0 first.

May be its trying to use the same *.srb (bin) just compiled for that intensity. I don't know
Later tonight I will try again
newbie
Activity: 24
Merit: 0
using the V1.2.2 :


---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.2.1                       <<< still 1.2.1 but the zip was 1.2.2
DevFee 1 minute every 2 hours (~ 0.85%)
Press 's' to get some stats
Press 'h' to get some hashrate
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------

Please wait...

Cryptonight mode enabled

[2018-04-06 02:24:29] Heating up system, please wait...



why too many stale share and the miner always restart mining?
hero member
Activity: 2548
Merit: 626
I'm testing the miner on stellite pool but no luck... XMR-stak last version is working I get 1250khs  2X RX570
using SRBMiner I get only a thread running even if I set true on double switch on true. I'have a G1840  CPU

On a FX8320E and two RX560 ... i get 325 h/s for GPU  using xmr-stak ... I can't have a working script on SRBMiner !

So I stop testing!
I've tested even on old pool using "normal" algo ...  nothing to do it doesn't work!

if you use the latest v1.2.2 and this conf (stellite test pool):

{
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 0,
"pool_use_tls" : false,
"pool" : "148.251.154.104:53811",
"wallet" : "Se321oJNkfaGrN89Vmq6qGZb8587L53u2NVZbCrhhJujemaGMVNmr952oEsQAKGFojevSWDNcJK8GS8 Sy4manyrG2okoPyvfa",
"password" : "x",
"location" : "europe",
"log_file" : "",
}

it has to work.
member
Activity: 133
Merit: 10
I'm testing the miner on stellite pool but no luck... XMR-stak last version is working I get 1250khs  2X RX570
using SRBMiner I get only a thread running even if I set true on double switch on true. I'have a G1840  CPU

On a FX8320E and two RX560 ... i get 325 h/s for GPU  using xmr-stak ... I can't have a working script on SRBMiner !

So I stop testing!
I've tested even on old pool using "normal" algo ...  nothing to do it doesn't work!
Jump to: