Are you running the latest 1.7.4?
plz fix webchain algo and add rigid in new version
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 78. (Read 237261 times)
December 30, 2018, 05:37:53 AM
Are you running the latest 1.7.4?
plz fix webchain algo and add rigid in new version
December 30, 2018, 04:42:40 AM
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4.
Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Im running a Vega Rig, but has no such issues. Which algo are you having these issues?
Are you running the latest 1.7.4?
December 30, 2018, 04:41:42 AM
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4.
Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Im running a Vega Rig, but has no such issues. Which algo are you having these issues?
December 30, 2018, 02:52:37 AM
Same problem reported here since v1.7.1 or more the vega rig became unstable. My rx580 rig have no problems with v1.7.4.
Vega 64 rig with v 1.7.4 get ramdom restarts, and i increase the mv in all gpus, lower intensity , and same problem!!
Driver version, algo, config file?
Does the miner restart, and work ok after that, or system freezes?
Can you describe ? Maybe i can find out what is happening
It was all ok on 1.7.0 ?
Also how often is this happening?
Is there any specific case you maybe noticed?
December 29, 2018, 08:48:33 PM
Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess.
Thanks for the information, Livada. I will leave it for a while to make sure that one is stable. To me, stability is more important.
December 29, 2018, 06:01:59 PM
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen.
Its not the software. Its your settings I would say
It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100.
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1084;950;0
GPU_P3=1138;1000;0
GPU_P4=1200;1050;0
GPU_P5=1401;1100;0
GPU_P6=1536;1150;0
GPU_P7=1552;840
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;950;0
Mem_P3=1100;875
Fan_Min=2750
Fan_Max=3500
Fan_Target=65
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
This is the v8 setting for miner.
{
"cryptonight_type" : "normalv8",
"intensity" : 120,
"worksize" : 16,
"double_threads" : true
}
Your PPT tabvle is BAD. This is not good.
USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1442;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;900
Fan_Min=2300
Fan_Max=4900
Fan_Target=56
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
or this for low consumation power
GPU_P0=852;800;0
GPU_P1=991;801;0
GPU_P2=1084;802;0
GPU_P3=1100;803;0
GPU_P4=1125;804;0
GPU_P5=1150;805;0
GPU_P6=1212;830;0
GPU_P7=1442;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;802;0
Mem_P3=1100;860
Fan_Min=2300
Fan_Max=3500
Fan_Target=55
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess.
December 29, 2018, 05:02:38 PM
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen.
Its not the software. Its your settings I would say
It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100.
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1084;950;0
GPU_P3=1138;1000;0
GPU_P4=1200;1050;0
GPU_P5=1401;1100;0
GPU_P6=1536;1150;0
GPU_P7=1552;840
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;950;0
Mem_P3=1100;875
Fan_Min=2750
Fan_Max=3500
Fan_Target=65
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
This is the v8 setting for miner.
{
"cryptonight_type" : "normalv8",
"intensity" : 120,
"worksize" : 16,
"double_threads" : true
}
Your PPT tabvle is BAD. This is not good.
USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1442;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;900
Fan_Min=2300
Fan_Max=4900
Fan_Target=56
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
or this for low consumation power
GPU_P0=852;800;0
GPU_P1=991;801;0
GPU_P2=1084;802;0
GPU_P3=1100;803;0
GPU_P4=1125;804;0
GPU_P5=1150;805;0
GPU_P6=1212;830;0
GPU_P7=1442;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;802;0
Mem_P3=1100;860
Fan_Min=2300
Fan_Max=3500
Fan_Target=55
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
Thanks Livada. I used this table and the power consumption is 30w less with almost same hashrate. Let's see if it can be stable for a while. My cards are all reference cards with 64 bios so it may consumes more power I guess.
December 29, 2018, 08:50:16 AM
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen.
Its not the software. Its your settings I would say
It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100.
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1084;950;0
GPU_P3=1138;1000;0
GPU_P4=1200;1050;0
GPU_P5=1401;1100;0
GPU_P6=1536;1150;0
GPU_P7=1552;840
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;950;0
Mem_P3=1100;875
Fan_Min=2750
Fan_Max=3500
Fan_Target=65
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
This is the v8 setting for miner.
{
"cryptonight_type" : "normalv8",
"intensity" : 120,
"worksize" : 16,
"double_threads" : true
}
Your PPT tabvle is BAD. This is not good.
USe this : 1130W form the WALL on v8 - i have 2*700W PSU only and all work fine with 6*vega 56 nitro+
GPU_P0=852;900;0
GPU_P1=991;900;0
GPU_P2=1084;900;0
GPU_P3=1138;900;0
GPU_P4=1150;900;0
GPU_P5=1202;900;0
GPU_P6=1212;900;0
GPU_P7=1442;900
Mem_P0=167;900;0
Mem_P1=500;900;0
Mem_P2=800;900;0
Mem_P3=1100;900
Fan_Min=2300
Fan_Max=4900
Fan_Target=56
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
or this for low consumation power
GPU_P0=852;800;0
GPU_P1=991;801;0
GPU_P2=1084;802;0
GPU_P3=1100;803;0
GPU_P4=1125;804;0
GPU_P5=1150;805;0
GPU_P6=1212;830;0
GPU_P7=1442;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;802;0
Mem_P3=1100;860
Fan_Min=2300
Fan_Max=3500
Fan_Target=55
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
December 29, 2018, 08:48:44 AM
December 29, 2018, 07:35:54 AM
for doktor83
ne mogu pm
pogaseno na pool-u
zato ne prihvata a ne odgovori nista miner-u, jer kada odgovori sa ovim greskama otkacinje miner
ne mogu pm
pogaseno na pool-u
Quote
if exist {
log.Printf("Duplicate share from %s@%s %v", login, cs.ip, params)
//return false, &ErrorReply{Code: 22, Message: "Duplicate share"}
}
if !validShare {
log.Printf("Invalid share from %s@%s", login, cs.ip)
// Bad shares limit reached, return error and close
if !ok {
// return false, &ErrorReply{Code: 23, Message: "Invalid share"}
}
return false, nil
}
log.Printf("Valid share from %s@%s", login, cs.ip)
cs.nextDiff = s.calcNewDiff(cs)
if !ok {
//return true, &ErrorReply{Code: -1, Message: "High rate of invalid shares"}
}
return true, nil
log.Printf("Duplicate share from %s@%s %v", login, cs.ip, params)
//return false, &ErrorReply{Code: 22, Message: "Duplicate share"}
}
if !validShare {
log.Printf("Invalid share from %s@%s", login, cs.ip)
// Bad shares limit reached, return error and close
if !ok {
// return false, &ErrorReply{Code: 23, Message: "Invalid share"}
}
return false, nil
}
log.Printf("Valid share from %s@%s", login, cs.ip)
cs.nextDiff = s.calcNewDiff(cs)
if !ok {
//return true, &ErrorReply{Code: -1, Message: "High rate of invalid shares"}
}
return true, nil
zato ne prihvata a ne odgovori nista miner-u, jer kada odgovori sa ovim greskama otkacinje miner
December 29, 2018, 07:11:12 AM
For now I'm using your miners since month , but after 1.7.0 I cannot get my miners stable . All are running on 1.7.0 and crashing around once a week. I'm far from the best hashrate average 1920 h/s for all the rigs. I try to get the best hashrate but I do not know best setting for reference cards.
I post in the other thread too to get more chance to get help:-) latest version or srb and crashing and same for TRM..
This is the log at the crash ( same for all miners)
[2018-12-29 11:18:14] miner_result: Pool accepted result 0x000026A4
[2018-12-29 11:18:22] hashrate: GPU0: 1861 H/s [BUS:12]
[2018-12-29 11:18:22] hashrate: GPU1: 1927 H/s [BUS:27]
[2018-12-29 11:18:22] hashrate: GPU2: 1884 H/s [BUS:3]
[2018-12-29 11:18:22] hashrate: GPU3: 1923 H/s [BUS:18]
[2018-12-29 11:18:22] hashrate: GPU4: 1920 H/s [BUS:24]
[2018-12-29 11:18:22] hashrate: GPU5: 1943 H/s [BUS:9]
[2018-12-29 11:18:22] hashrate: GPU6: 1886 H/s [BUS:15]
[2018-12-29 11:18:22] hashrate: GPU7: 1927 H/s [BUS:21]
[2018-12-29 11:18:22] hashrate: Total: 15271 H/s
[2018-12-29 11:18:25] miner_result: Sending user result to pool
[2018-12-29 11:18:25] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"ba8c00b0","result":"25c110c6e4606e5319aa9f5af76156e1e6b221c55237e4da8f175f06364e0000"}}
[2018-12-29 11:18:25] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:25] miner_result: Pool accepted result 0x00004E36
[2018-12-29 11:18:32] miner_result: Sending user result to pool
[2018-12-29 11:18:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"36a60090","result":"61d4bc628319756462503d5b2a998a43226065456c31c6de0a62e3b166450000"}}
[2018-12-29 11:18:32] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:32] miner_result: Pool accepted result 0x00004566
[2018-12-29 11:18:33] miner_result: Sending user result to pool
[2018-12-29 11:18:33] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"1ba60010","result":"bf043e2f595083f8bde62384eef736945926f626dbca4fe50e88b0041a6e0000"}}
[2018-12-29 11:18:33] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:33] miner_result: Pool accepted result 0x00006E1A
[2018-12-29 11:18:43] miner_result: Sending user result to pool
[2018-12-29 11:18:43] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"37cd0020","result":"60dc05569c283ab05b451d907bd4086b21778cb2783bffcbfa1b737465830000"}}
[2018-12-29 11:18:43] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:43] miner_result: Pool accepted result 0x00008365
[2018-12-29 11:18:45] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090986949de10534e1f20e6eae556262af5a2ac58b31c6cf93b046fa91ea55009542685ff6e9f40 0000000aae71b79d62e585c951fad9fce0d257235b57e05ea5533e283801246315a80de01","job_id":"64765","target":"cf8b0000"}}
[2018-12-29 11:18:45] pool_have_job: Pool sent a new job (ID: 64765)
[2018-12-29 11:18:57] miner_result: Sending user result to pool
[2018-12-29 11:18:57] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"aa280040","result":"f84d394527ec04e5bf9dfab181fd968fd6fbaed3983a07fe751b3465c6460000"}}
[2018-12-29 11:18:57] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:57] miner_result: Pool accepted result 0x000046C6
[2018-12-29 11:18:59] miner_result: Sending user result to pool
[2018-12-29 11:18:59] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"75280090","result":"a9d09e3ca6e12eeb260451eaf4f67c7996b9be4a7ca86302e6280ad619300000"}}
[2018-12-29 11:19:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090993949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000d332bb0ff3117b0060f9903e9d2be5808e5198984ab375eb39ad55ccbd6448d001","job_id":"64766","target":"cf8b0000"}}
[2018-12-29 11:19:00] json_receive: {"id":1,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Block expired"}}
[2018-12-29 11:19:00] pool_have_job: Pool sent a new job (ID: 64766)
[2018-12-29 11:19:17] miner_result: Sending user result to pool
[2018-12-29 11:19:17] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"0f3300d0","result":"aad84fc4ac5913f6a513e57177aa113779e8882e21051d55fb5d7604cb070000"}}
[2018-12-29 11:19:17] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:17] miner_result: Pool accepted result 0x000007CB
[2018-12-29 11:19:40] miner_result: Sending user result to pool
[2018-12-29 11:19:40] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"df8b0070","result":"963eb439b4edfe088e79442d62d5a2a50d9a634489d30260f799b647075d0000"}}
[2018-12-29 11:19:40] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:40] miner_result: Pool accepted result 0x00005D07
[2018-12-29 11:19:54] miner_result: Sending user result to pool
[2018-12-29 11:19:54] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"09bc0040","result":"7403df0c0ee20430427622d4ac91b6c4f19e9c81655cc06409cf89a585210000"}}
[2018-12-29 11:19:54] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:54] miner_result: Pool accepted result 0x00002185
[2018-12-29 11:20:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909cf949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000bbd2c3819f4b6f4a0cae913c63b6eb98688a653d5c2f786f2f17403ff183140a02","job_id":"64767","target":"cf8b0000"}}
[2018-12-29 11:20:00] pool_have_job: Pool sent a new job (ID: 64767)
[2018-12-29 11:20:03] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S
[2018-12-29 11:20:23] hashrate: GPU0: 0 H/s [BUS:12]
[2018-12-29 11:20:23] hashrate: GPU1: 0 H/s [BUS:27]
[2018-12-29 11:20:23] hashrate: GPU2: 1885 H/s [BUS:3]
[2018-12-29 11:20:23] hashrate: GPU3: 1925 H/s [BUS:18]
[2018-12-29 11:20:23] hashrate: GPU4: 0 H/s [BUS:24]
[2018-12-29 11:20:23] hashrate: GPU5: 1943 H/s [BUS:9]
[2018-12-29 11:20:23] hashrate: GPU6: 0 H/s [BUS:15]
[2018-12-29 11:20:23] hashrate: GPU7: 1928 H/s [BUS:21]
[2018-12-29 11:20:23] hashrate: Total: 7681 H/s
[2018-12-29 11:20:25] watchdog: GPU crash detected, miner will try to restart
[2018-12-29 11:20:25] Restarting miner process
I post in the other thread too to get more chance to get help:-) latest version or srb and crashing and same for TRM..
This is the log at the crash ( same for all miners)
[2018-12-29 11:18:14] miner_result: Pool accepted result 0x000026A4
[2018-12-29 11:18:22] hashrate: GPU0: 1861 H/s [BUS:12]
[2018-12-29 11:18:22] hashrate: GPU1: 1927 H/s [BUS:27]
[2018-12-29 11:18:22] hashrate: GPU2: 1884 H/s [BUS:3]
[2018-12-29 11:18:22] hashrate: GPU3: 1923 H/s [BUS:18]
[2018-12-29 11:18:22] hashrate: GPU4: 1920 H/s [BUS:24]
[2018-12-29 11:18:22] hashrate: GPU5: 1943 H/s [BUS:9]
[2018-12-29 11:18:22] hashrate: GPU6: 1886 H/s [BUS:15]
[2018-12-29 11:18:22] hashrate: GPU7: 1927 H/s [BUS:21]
[2018-12-29 11:18:22] hashrate: Total: 15271 H/s
[2018-12-29 11:18:25] miner_result: Sending user result to pool
[2018-12-29 11:18:25] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"ba8c00b0","result":"25c110c6e4606e5319aa9f5af76156e1e6b221c55237e4da8f175f06364e0000"}}
[2018-12-29 11:18:25] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:25] miner_result: Pool accepted result 0x00004E36
[2018-12-29 11:18:32] miner_result: Sending user result to pool
[2018-12-29 11:18:32] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"36a60090","result":"61d4bc628319756462503d5b2a998a43226065456c31c6de0a62e3b166450000"}}
[2018-12-29 11:18:32] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:32] miner_result: Pool accepted result 0x00004566
[2018-12-29 11:18:33] miner_result: Sending user result to pool
[2018-12-29 11:18:33] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"1ba60010","result":"bf043e2f595083f8bde62384eef736945926f626dbca4fe50e88b0041a6e0000"}}
[2018-12-29 11:18:33] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:33] miner_result: Pool accepted result 0x00006E1A
[2018-12-29 11:18:43] miner_result: Sending user result to pool
[2018-12-29 11:18:43] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64764","nonce":"37cd0020","result":"60dc05569c283ab05b451d907bd4086b21778cb2783bffcbfa1b737465830000"}}
[2018-12-29 11:18:43] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:43] miner_result: Pool accepted result 0x00008365
[2018-12-29 11:18:45] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090986949de10534e1f20e6eae556262af5a2ac58b31c6cf93b046fa91ea55009542685ff6e9f40 0000000aae71b79d62e585c951fad9fce0d257235b57e05ea5533e283801246315a80de01","job_id":"64765","target":"cf8b0000"}}
[2018-12-29 11:18:45] pool_have_job: Pool sent a new job (ID: 64765)
[2018-12-29 11:18:57] miner_result: Sending user result to pool
[2018-12-29 11:18:57] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"aa280040","result":"f84d394527ec04e5bf9dfab181fd968fd6fbaed3983a07fe751b3465c6460000"}}
[2018-12-29 11:18:57] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:18:57] miner_result: Pool accepted result 0x000046C6
[2018-12-29 11:18:59] miner_result: Sending user result to pool
[2018-12-29 11:18:59] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64765","nonce":"75280090","result":"a9d09e3ca6e12eeb260451eaf4f67c7996b9be4a7ca86302e6280ad619300000"}}
[2018-12-29 11:19:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"090993949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000d332bb0ff3117b0060f9903e9d2be5808e5198984ab375eb39ad55ccbd6448d001","job_id":"64766","target":"cf8b0000"}}
[2018-12-29 11:19:00] json_receive: {"id":1,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Block expired"}}
[2018-12-29 11:19:00] pool_have_job: Pool sent a new job (ID: 64766)
[2018-12-29 11:19:17] miner_result: Sending user result to pool
[2018-12-29 11:19:17] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"0f3300d0","result":"aad84fc4ac5913f6a513e57177aa113779e8882e21051d55fb5d7604cb070000"}}
[2018-12-29 11:19:17] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:17] miner_result: Pool accepted result 0x000007CB
[2018-12-29 11:19:40] miner_result: Sending user result to pool
[2018-12-29 11:19:40] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"df8b0070","result":"963eb439b4edfe088e79442d62d5a2a50d9a634489d30260f799b647075d0000"}}
[2018-12-29 11:19:40] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:40] miner_result: Pool accepted result 0x00005D07
[2018-12-29 11:19:54] miner_result: Sending user result to pool
[2018-12-29 11:19:54] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"64766","nonce":"09bc0040","result":"7403df0c0ee20430427622d4ac91b6c4f19e9c81655cc06409cf89a585210000"}}
[2018-12-29 11:19:54] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-12-29 11:19:54] miner_result: Pool accepted result 0x00002185
[2018-12-29 11:20:00] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909cf949de105d961d240b17c4aa4a3e02d9d3d542ed8bd7692b27561a763f161e957a1b077ac0 0000000bbd2c3819f4b6f4a0cae913c63b6eb98688a653d5c2f786f2f17403ff183140a02","job_id":"64767","target":"cf8b0000"}}
[2018-12-29 11:20:00] pool_have_job: Pool sent a new job (ID: 64767)
[2018-12-29 11:20:03] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S
[2018-12-29 11:20:03] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU0 [BUS: 12] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU1 [BUS: 27] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU4 [BUS: 24] hashing speed is 0 H/S
[2018-12-29 11:20:14] watchdog: GPU6 [BUS: 15] hashing speed is 0 H/S
[2018-12-29 11:20:23] hashrate: GPU0: 0 H/s [BUS:12]
[2018-12-29 11:20:23] hashrate: GPU1: 0 H/s [BUS:27]
[2018-12-29 11:20:23] hashrate: GPU2: 1885 H/s [BUS:3]
[2018-12-29 11:20:23] hashrate: GPU3: 1925 H/s [BUS:18]
[2018-12-29 11:20:23] hashrate: GPU4: 0 H/s [BUS:24]
[2018-12-29 11:20:23] hashrate: GPU5: 1943 H/s [BUS:9]
[2018-12-29 11:20:23] hashrate: GPU6: 0 H/s [BUS:15]
[2018-12-29 11:20:23] hashrate: GPU7: 1928 H/s [BUS:21]
[2018-12-29 11:20:23] hashrate: Total: 7681 H/s
[2018-12-29 11:20:25] watchdog: GPU crash detected, miner will try to restart
[2018-12-29 11:20:25] Restarting miner process
December 29, 2018, 06:50:38 AM
Hello everyone,
I used this miner for a while on my rigs but I can't get them stable.
Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios .
Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64)
Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
I used this miner for a while on my rigs but I can't get them stable.
Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios .
Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64)
Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
Can you decide which miner are you using, TRM or SRB?
I see you pasted exactly this same text in their thread.
December 29, 2018, 06:38:54 AM
Hello everyone,
I used this miner for a while on my rigs but I can't get them stable.
Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios .
Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64)
Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
I used this miner for a while on my rigs but I can't get them stable.
Using windows 10 with 18.6.1 drivers ( srb almost stable)
I use only reference card with blower, vega 56 and vega 64 and some vega 56 with 64 bios .
Im using these PPT for all cards Core P0-P6 : 900mv Mem P0-P2 : 900mV
Most of the card are running 1395 core 945 Mem for Vega56 and 1395 core 1090 mem for Vega 64 . (925-900 for some 56, 1025 for some 64)
Best one are running 870mv core 850 mv Mem, bad ones 950 core and 900-930 mem.
The best hashrate I can get with that settings are 2020h/s for vega 64 but average is around 1950h/s for 64 and 1900h/s for Vega 56.
Someone can help me to find best settings for reference card , PPT ? overdriventool settings ? Miner setting?
December 29, 2018, 03:16:25 AM
Please, do not get me wrong. I think it is a great miner and I am using it for months. The other guy mentioned it may be the setting issue and i believe it makes sense. Could you take a look at the settings?
At first look, too high frequencies (core/mem) with too low voltages. Not surprised that it crashes driver from time to time.
Anyhow, fuse tripping at 2KW should be something for experienced electrician.
December 29, 2018, 02:44:10 AM
I am pretty sure the power consumption isnt just 'growing' because of the miner, if that was the case then there would be reports of it already and a lot of dead rigs 
Please, do not get me wrong. I think it is a great miner and I am using it for months. The other guy mentioned it may be the setting issue and i believe it makes sense. Could you take a look at the settings?
December 29, 2018, 02:37:15 AM
I am pretty sure the power consumption isnt just 'growing' because of the miner, if that was the case then there would be reports of it already and a lot of dead rigs
December 29, 2018, 02:30:02 AM
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen.
Its not the software. Its your settings I would say
It makes sense. Could you take a look at my overdriventool setting? It is a vega 56 with 64 bios. memeory is set to 1100.
GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1084;950;0
GPU_P3=1138;1000;0
GPU_P4=1200;1050;0
GPU_P5=1401;1100;0
GPU_P6=1536;1150;0
GPU_P7=1552;840
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=800;950;0
Mem_P3=1100;875
Fan_Min=2750
Fan_Max=3500
Fan_Target=65
Fan_Acoustic=2400
Power_Temp=75
Power_Target=0
This is the v8 setting for miner.
{
"cryptonight_type" : "normalv8",
"intensity" : 120,
"worksize" : 16,
"double_threads" : true
}
December 29, 2018, 01:20:37 AM
Hello Doktor.
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Nothing has changed you should have the same speed or maybe a few hashes more.
To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet.
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
It could be your intensity or overclock to much. Sometimes a gpu may crash and reset to default settings. Which on vega will increase power a lot. If ppt mod this won't happen.
Its not the software. Its your settings I would say
December 29, 2018, 01:13:14 AM
Hello Doktor.
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Nothing has changed you should have the same speed or maybe a few hashes more.
To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet.
I am using two PSUs with a combined 1900w. The PSU is fine but the breaker is tripped. I also use overdriventool so the power consumption is around 1250w which is not bad at all for monero v8. It is just every few days I got this power surge. And after this happens, I have to start the miner few times to get a 1250w cause the first few starts always get a 1900w power so i have to stop the miner and restarted it.
December 29, 2018, 12:56:36 AM
Hello Doktor.
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Is there any changes in 1.7.4 on heavy algo - 580 8gb (ellesmere)?
With v1.7.2 - 1250+
With v1.7.4 - 1000-
Nothing has changed you should have the same speed or maybe a few hashes more.
To doctor83:
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Thanks doctor this is an awesome miner. However, I have a problem with my 6x Vega 56 rig. Every a few days, 2 or 3 days actually, the miner seemed to reach to a very high power consumption and the power surge tripped the breaker. It happened a few times so it does not look like an accident. Any idea how this could happen? TIA.
Maybe your PSU is weak for 6 vegas + algo you are using ? You should probably tune your cards with PPT and overdriventtool if you haven't done so yet.
Jump to: