Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 86. (Read 237247 times)

If the app kills the miner, and starts it again then the devfee timer is reset.
If you use a smart profit switcher which uses the stratum protocol to signal the miner there is an algo switch, then the devfee timer isn't reset, even if the miner restarts itself.

Hey Doc,

i have a quick Question about the Devfee.

I am currently testing the Cryptonight Profit Switcher, Version 6.0.0. The Profit Switching closes the Miner complete and restart it when a Algo/Coin Switch accure.

Question: What is is this case with the DevFee? Do i have to "pay" it with every new Miner Start or do you have done some Modifications for this case that it is stored that this Miner has already paid the Fee?

THX
Oliver

Hi doktor

Thanks for help,

I use the reboot_script_gpu_watchdog pointing to your reboot-windows batch file,  its ok like this ? : 

"reboot_script_gpu_watchdog"  : "reboot-windows.bat",

What im reporting is only crashes that wasn t before in vegas rigs .

All my 3 rigs crashed badly with 1.7.2 version. Even my standalone vega 64 and 56 on my two desktop pc had one appcarsh ->  https://justpaste.it/7jrik

In my rx580 rig all ok with a crazy performance boost  

Thanks

why elpida? its my timings for yeston rx460 4G micron. And it's rock https://bitcointalksearch.org/topic/m.28547172

That one is 580 i think, no config, i test all mining sw with default or auto tune settings. 2100 would be for the slower memory timings. If you get 1025 with rx570s with slower timings and 2100 memory it might be worth a try for me.
Currntly this is pretty much maximum I can run without errors..

Send 1 SS statistic 30min on tube. You not send 1 SS and your statistic is FAKE. I have Vega 64 LE and max RPM is 3300.
4900 rpm have air vega not LE.

2000 + on TUBE? i have 4000 HR now
tomorow i have 5600HR on tube with 1 vega 56 - this is true (and your statistic is true )

wona see SS for 5600 on 1 vega 56? first send your SS with 2050H on tube.

for other gys- This HR is FAKE.

setupo and HR for lsHaKeR on tube:
[2018-12-09 12:31:22] GPU0 : 4356 H/s [T: 36c, RPM: 2174, CC: 1498 MHz, MC: 1110 MHz][BUS:7]

http://imgbox.com/EKKivdDp

With fragments =9999 speed about 500 h/s 

no but you can set fragments to 9999 and it will use the 'old fashioned' way

Hi, doktor83

I have Rx550 card gigabyte and Asus. On 1.6.8 version of miner i'm using "fragments" : 338033747 and about 520 H/s on v7 or stellite.
But on version 1.7.2 if i set "fragments" : 33803374 then miner set 1. And perfomance about 500 H/s.
If "fragments" : 9997 then speed 480 H/s. If "fragments" : 9998 then speed 500 H/s.

Is it possible to return old behaviour, and i can set "fragments" : 33803374 ?

Maybe the 18.9.2 is the problem.
Have you tried with some of the recommended drivers?

Still looking into why my 8 GB card running slow than my 4 GB cards on CN-Lite V7.

4 GB runs around 2 khs
8 GB runs about 1.7 khs

I"ve tried alot of different combos with threads, worksizes and intensity... I went all the way up to 200 intensity with dual threads work size 8... Runs slower... I tried worksize 16, slow.... Seems like I top out at intensity of 130/8/2 at 1700.

That's about memory straps, how the gpu handles it's memory, see e.g. https://forum.ethereum.org/discussion/13807/guide-tutorial-xmr-eth-how-to-mod-polaris-bios-amd-rx-470-570-480-580-mining
When your question is on the version number, I just know 3.1 not 3.1.1.

Hi
Problem upgrading from 1.6.9 to 1.7.2 : impossible to get v8 working !
No problem under heavy or haven.
But v8 give me no share and lots of memory errors after few minutes.
Lowered intensity, core and memory, no effect.
T=1, T=2, W=8, W=16, ..., no change.
Moved from config file to full command line, no change.

Running this on 5 RX470 4G :
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 22,22,22,22,22 --cgputhreads 2,2,2,2,2 --cgpuworksize 16,16,16,16,16 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword test

Any idea ?


EDIT1 :
same on RX570 8G ... I'm probably missing something evident but I don't see


EDIT 2 :
this works on my test vega 56 :
SRBMiner-CN.exe --gpureorder --logfile log.txt --cgpuid 0 --ccryptonighttype normalv8 --cgpuintensity 72 --cgputhreads 2 --cgpuworksize 16 --cgputargettemperature 58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword test


EDIT 3 : more tests

5 RX 570 4G
core 1100,900mV
mem 1980,900mV
Drivers 18.9.2

Values are fixed low, for testing.

HEAVY
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype heavy --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool loki.miner.rocks:5555 --cwallet LA5QnQ5vBk8c8CQ1yN2GR7LhYMyCawDw3W22FHegHj5KEQtRfmiZQq9DRv62GLH48DaEWF8JatD3sKc 35CVFrrAE7LuNpg5.10000 --cpassword x


HAVEN
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype haven --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool ca.haven.miner.rocks:4005 --cwallet hvi1aCqoAZF19J8pijvqnrUkeAeP8Rvr4XyfDMGJcarhbL15KgYKM1hN7kiHMu3fer5k8JJ8YRLKCah DKFgLFgJMYAfnHoWFjtn1PPA2DN8V5.10000 --cpassword x


V8 (PYX)
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pyrex.youpool.io:3336 --cwallet PYX1U4ooifULtTy8rj7cZM6BVzkCj56gD9XK6sh6q7NfVBVYKFYLxAwj1NxdoZ27EqJbdJF5fvVX6AL zr3SZ3yUeAR3Rh43Erp.5000 --cpassword x


V8 (GRAFT)
SRBMiner-CN.exe --gpureorder --logfile log.txt --ccryptonighttype normalv8 --cgpuid 0,1,2,3,4 --cgpuintensity 32,32,32,32,32 --cgputhreads 1,1,1,1,1 --cgpuworksize 8,8,8,8,8 --cgputargettemperature 58,58,58,58,58 --cpool stratum+tcp://pool.graft.community:3333 --cwallet GMPHYf5KRkcAyik7Jw9oHRfJtUdw2Kj5f4VTFJ25AaFVYxofetir8Cnh7S76Q854oMXzwaguL8p5KEz 1tm3rn1SA6qPuEmj3pWiQfAqMeJ --cpassword x


What's wrong ?

Mind sharing your config on SRB miner?

this card seems ok

[2018-12-08 11:56:20] GPU8 :    1024 H/s [T: 66c, RPM: 1707, CC: 1300 MHz, MC: 2040 MHz][BUS:4]

if its samsung you can go higher (v8 is a bit to memory intensive), try 2100

MY core is 1270 on 4gb nitro+ getting 1025 on all cards

11 gpus are nitro+ rx570 8g samsung
1 gpu is xfx rx580 8g samsung
is this optimal config?
cnv8
[2018-12-08 11:56:20] GPU0 :    986 H/s [T: 62c, RPM: 1902, CC: 1300 MHz, MC: 2040 MHz][BUS:7]
[2018-12-08 11:56:20] GPU1 :    983 H/s [T: 57c, RPM: 1788, CC: 1300 MHz, MC: 2040 MHz][BUS:12]
[2018-12-08 11:56:20] GPU2 :    976 H/s [T: 59c, RPM: 1809, CC: 1300 MHz, MC: 1970 MHz][BUS:10]
[2018-12-08 11:56:20] GPU3 :    987 H/s [T: 57c, RPM: 1784, CC: 1300 MHz, MC: 2040 MHz][BUS:2]
[2018-12-08 11:56:20] GPU4 :    978 H/s [T: 61c, RPM: 1898, CC: 1300 MHz, MC: 1970 MHz][BUS:8]
[2018-12-08 11:56:20] GPU5 :    987 H/s [T: 54c, RPM: 1518, CC: 1300 MHz, MC: 2040 MHz][BUS:5]
[2018-12-08 11:56:20] GPU6 :    987 H/s [T: 58c, RPM: 1855, CC: 1300 MHz, MC: 2040 MHz][BUS:1]
[2018-12-08 11:56:20] GPU7 :    988 H/s [T: 60c, RPM: 1885, CC: 1300 MHz, MC: 2040 MHz][BUS:13]
[2018-12-08 11:56:20] GPU8 :    1024 H/s [T: 66c, RPM: 1707, CC: 1300 MHz, MC: 2040 MHz][BUS:4]
[2018-12-08 11:56:20] GPU9 :    987 H/s [T: 55c, RPM: 1780, CC: 1300 MHz, MC: 2040 MHz][BUS:3]
[2018-12-08 11:56:20] GPU10:    986 H/s [T: 55c, RPM: 1776, CC: 1300 MHz, MC: 2040 MHz][BUS:9]
[2018-12-08 11:56:20] GPU11:    978 H/s [T: 62c, RPM: 1852, CC: 1300 MHz, MC: 1970 MHz][BUS:11]
[2018-12-08 11:56:20] Total:    11847 H/s
~1600w for whole rig

finally now, when profitability is low, i'm starting sw benchmarks - i mine with each miner sw for 48h and check consumption and real hasheshes on pool. Obviously clean boot before every sw switch. But unfortunately nothing to publish, as with srb miner i noticed i run eth OC (1200mhz) instead of 1300mhz on most cards. I still don't know if 1300mhz is optimal for XMR performance/consumption wise.

I hope at least now, I can get reasonable replies from people with experience and no bullshit about 70w consumption of 570 card etc. like there were people claiming in January.

I guess I have this on all the cards (i extracted from two different and verified all cards are samsung K4G80325FB )
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19

voltages obviously lowest stable without some extreme trying for each mV.

SRBbios editor setting is:
777000000000000022CC1C00EF695D49D0571016360D460B0060870014051420FA8900A00300000 01B11333DB4303A17

This is not true. Your setup and  HR is FAKE.  You not send any  SS for this. i have 3000HR (125W) with vega 56 on tube algo  you only 2050? your setup is bad

[2018-12-08 20:11:026] GPU0 :    3143 H/s [T: 21c, RPM: 2387, CC: 1380 MHz, MC: 1090 MHz][BUS:7]
Settings: { "id" : 0, "intensity" : 63, "worksize" : 8, "threads" : 2},

for all other gys. This is not true.

Vega 64 LE not have 3700 RPM(my have 3300RPM max) - all other card not have temp 30C
i have vega  64LE and this temp have only or NORTH POLE
normal TEMP for 64LE is 40C on 2000RPM

Its Elpida timings good for micron ??

777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715
 

please help this error. created one cache file "g1_XHV_w8_f1_hm1_ha.srb"

i use  2x rx580 + 4x vega 64

What is timing samsung ubernix 3.1.1?