SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 92.

MaxHa$h

newbie

Activity: 37

Merit: 0

Quote from: RuMiner on November 28, 2018, 06:42:02 AM

Doc, something strange happened after updating to 1.7.1. One of rigs (8xVega56) disappeared from nanopool 11 hours back like it's off, but it mines, consumes power and shows normal hashrate like it was when compiling kernels on fresh drivers. Reboot helped, rig is back online, but I doubt it couldn't occur again.

Ive had the same thing happen on a vega rig with supportXMR, though it has to be on their side as my payout stayed the same... did you payout change?

RuMiner

member

Activity: 168

Merit: 15

Doc, something strange happened after updating to 1.7.1. One of rigs (8xVega56) disappeared from nanopool 11 hours back like it's off, but it mines, consumes power and shows normal hashrate like it was when compiling kernels on fresh drivers. Reboot helped, rig is back online, but I doubt it couldn't occur again.

tanatana

newbie

Activity: 50

Merit: 0

it crashes faster if the voltage drops by 100 millivolts
My card two MSI R9 390, one Sapphire R9 390 - work on three computers

Quote

{
"cryptonight_type" : "normalv8",
"intensity" : 48,
"double_threads" : true
}

without reducing the voltage one card (MSI) works steadily just an hour, but the other two bugs
speed 802 H/s

Dripac

newbie

Activity: 71

Merit: 0

1040/1500 -100mv 1080mv on load

tanatana

newbie

Activity: 50

Merit: 0

Quote from: Dripac on November 27, 2018, 08:58:54 AM

@tanatana sorry i give you wrong setup for 390. This is my setup:

{
"cryptonight_type" : "normalv8",
"intensity" : 48,
"double_threads" : true
}

speed 800H -> after 4-5 minut driver crash

fenomenyaa

jr. member

Activity: 131

Merit: 2

Quote from: SauteedEntrails on November 27, 2018, 03:06:39 PM

@doktor83
I just have to say thank you, 1.7.0 was great and very stable but 1.7.1 is by far the best miner out to date. running (4) 480 8gb incredible rock solid stability.
after 24hrs no hangs no drops no issues. just amazing
mining haven (Cryptonight-heavy/xhv)

(1.7.0)
1min avg 4629 h/s 5min avg 4650 h/s 30min avg 4645 h/s Max 4688 h/s

(1.7.1)
1min avg 4739 h/s 5min avg 4738 h/s 30min avg 4740 h/s Max 4749 h/s

Again thank you for your incredible work.

Could u share the settings of miner and core-memclock of gpu's.

SauteedEntrails

newbie

Activity: 22

Merit: 0

@doktor83
I just have to say thank you, 1.7.0 was great and very stable but 1.7.1 is by far the best miner out to date. running (4) 480 8gb incredible rock solid stability.
after 24hrs no hangs no drops no issues. just amazing
mining haven (Cryptonight-heavy/xhv)

(1.7.0)
1min avg 4629 h/s 5min avg 4650 h/s 30min avg 4645 h/s Max 4688 h/s

(1.7.1)
1min avg 4739 h/s 5min avg 4738 h/s 30min avg 4740 h/s Max 4749 h/s

Again thank you for your incredible work.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: neogeo on November 27, 2018, 04:48:36 AM

Quote from: abg00 on November 24, 2018, 03:31:50 AM

on tube

rx470\480\570\580 4gb +50-60 h\s in heavy 3 mode
1.7.1 820-860 h\s

What's the value for Fragmets and Bralock for 470/570/580 4GB for Tube???
TNX

I=29 W=8 F=1 bralock default
heavy_mode=3

1150\2000-2050

so not good rig with different card

[2018-11-27 20:53:02] GPU0 : 854 H/s [T: 53c, RPM: 2137, CC: 1150 MHz, MC: 2020 MHz][BUS:1]
[2018-11-27 20:53:02] GPU1 : 846 H/s [T: 52c, RPM: 1761, CC: 1150 MHz, MC: 2020 MHz][BUS:2]
[2018-11-27 20:53:02] GPU2 : 812 H/s [T: 53c, RPM: 1659, CC: 1150 MHz, MC: 2020 MHz][BUS:3]
[2018-11-27 20:53:02] GPU3 : 820 H/s [T: 54c, RPM: 2188, CC: 1150 MHz, MC: 2000 MHz][BUS:4]
[2018-11-27 20:53:02] GPU4 : 830 H/s [T: 60c, RPM: 1372, CC: 1150 MHz, MC: 2000 MHz][BUS:5]
[2018-11-27 20:53:02] GPU5 : 858 H/s [T: 48c, RPM: 1279, CC: 1150 MHz, MC: 2020 MHz][BUS:7]
[2018-11-27 20:53:02] GPU6 : 853 H/s [T: 51c, RPM: 1730, CC: 1150 MHz, MC: 2020 MHz][BUS:8]
[2018-11-27 20:53:02] GPU7 : 856 H/s [T: 51c, RPM: 1848, CC: 1150 MHz, MC: 2020 MHz][BUS:9]
[2018-11-27 20:53:02] GPU8 : 860 H/s [T: 57c, RPM: 2495, CC: 1150 MHz, MC: 2020 MHz][BUS:10]
[2018-11-27 20:53:02] GPU9 : 852 H/s [T: 52c, RPM: 1376, CC: 1150 MHz, MC: 2020 MHz][BUS:11]
[2018-11-27 20:53:02] GPU10: 818 H/s [T: 52c, RPM: 1376, CC: 1150 MHz, MC: 2020 MHz][BUS:12]
[2018-11-27 20:53:02] GPU11: 826 H/s [T: 51c, RPM: 1567, CC: 1150 MHz, MC: 2020 MHz][BUS:13]
[2018-11-27 20:53:02] Total: 10085 H/s

Dripac

newbie

Activity: 71

Merit: 0

@tanatana sorry i give you wrong setup for 390. This is my setup:

{
"cryptonight_type" : "normalv8",
"intensity" : 48,
"double_threads" : true
}

tanatana

newbie

Activity: 50

Merit: 0

Quote from: Dripac on November 27, 2018, 06:14:31 AM

Quote from: tanatana on November 27, 2018, 03:57:15 AM

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

Quote

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

Try Intesity 71 805H 1040/1500

Quote

"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 96, "worksize" : 12, "threads" : 1},
{ "id" : 1, "intensity" : 96, "worksize" : 12, "threads" : 1}
]
}

speed 755 H

playfast

jr. member

Activity: 131

Merit: 3

"persistent_memory" : true is good for the Heavy algo, I was able to go a bit higher with intensities on my 2gb rx560's.
I also notice Heavy can be tweaked with smaller intensity increments than v8. It can respond to 0.04 increments (like 12.60>12.64>12.68 and so on) to find best hashrates.

Dripac

newbie

Activity: 71

Merit: 0

Quote from: tanatana on November 27, 2018, 03:57:15 AM

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

Quote

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

Try Intesity 71 805H 1040/1500

KhorneFlake

newbie

Activity: 27

Merit: 0

Ok, wanted to make another report. For the past 12 hours both of my GPUs are mining at their full capability, both going above 1750H/s. But before I restarted the PC one of them was like 900-1100h/s. And I'm sure, as always, that the second GPU will drop to the cca 1000 at any moment. Everything seems so random, I cannot pinpoint at any setting or config to tweak and say I did this thing and it works properly now. I simply downloaded the latest 1.7.1 version and inserted my wallet into the config. It was mining with one GPU at 1750h/s, and the other one always started at 1100 and dropped to 900 eventually. So, yeah. Really not sure what I can do myself for that matter.

Edit: I'm also using the latest 18.11.2 driver.

Edit2: Ok, I just played a video on YouTube and it dropped to 1100h/s right off…. And it stays like that the whole time now. *sigh*

neogeo

newbie

Activity: 81

Merit: 0

Quote from: abg00 on November 24, 2018, 03:31:50 AM

test lot of cards
on tube

rx470\480\570\580 4gb +50-60 h\s in heavy 3 mode
1.7.1 820-860 h\s

and old trouble with 8gb 470\480\570\580 card. test with different config. -70-80 h\s
back to 1.6.7

test 560 4 gb card
1.6.9 508 h\s
1.7.1 440 h\s

560 2 gb
1.7.0 380 h\s
1.7.1 406 h\s

550 2 gb and 4 gb same rate

What's the value for Fragmets and Bralock for 470/570/580 4GB for Tube???
TNX

tanatana

newbie

Activity: 50

Merit: 0

MSI r9 390 default gpu/memory speed 632 H SRBMiner-CN-V1-7-1

Quote

{
"cryptonight_type" : "normalv8",
"intensity" : 0,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 64, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 64, "worksize" : 8, "threads" : 1}
]
}

Hansibua

newbie

Activity: 5

Merit: 0

ist es möglich mit 11 vega 64 zu Arbeiten
9 arbeiten ohne Problem

Was muss ich beachten

win 10
B250
18.6.1

KolordZ

newbie

Activity: 28

Merit: 0

Hello guys !

I did the update to 1.7.1 but I have lost 300 H/s. I'm mining Normal V8

I have 3 Sapphire RX Vegas 64 Nitro+

Config in 1.7.0 :

{
"cryptonight_type" : "normalv8",
"intensity" : 124,
"double_threads" : true
}

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 13]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][A: 0][BUS: 3]

I tried to put same config in 1.7.1 but lost 300 H/s...

Drivers : 18.6.1
I tried to play with "aes" ; "fragments" and "bralock" but nothing good ..

Going back to 1.7.0 ...

Any tips ?

Ultrasonik

jr. member

Activity: 103

Merit: 2

check i=58 mode 2 f=0

i check all manual settings on 1.7.1
they all give worse results, went through all the combinations
but more than automatic mode they did not give
-combination last driver + 1.6.7 (possibly .1.6. Cool

only valid for Algo: cryptonight-saber

abg00

jr. member

Activity: 288

Merit: 1

Quote from: Ultrasonik on November 26, 2018, 12:52:18 PM

SRBminer amd rx470 8 GB
old v1.6.7 1004 h/s
new v1.7.1 968 h/s
Algo:cryptonight-saber (bittube)

check i=58 mode 2 f=0

Ultrasonik

jr. member

Activity: 103

Merit: 2

Quote from: twotwosix on November 26, 2018, 01:08:29 PM

Quote from: Ultrasonik on November 26, 2018, 12:52:18 PM

SRBminer amd rx470 8 GB
old v1.6.7 1004 h/s
new v1.7.1 968 h/s
Algo:cryptonight-saber (bittube)

What config for both?

pools_tube2.txt
{
"pools" :
[
   {
      "pool" : "tube.ingest.cryptoknight.cc:5631",
      "wallet" : "bxcVQSwjWm2NaemPUZwBFaDUemx25sPCgFu2i66hjXdmPu1JwRewxKdffrb5VARu4wTfGYn9ngTGz2a YdRc8eBMX1dvJX6tum.27000",
      "password" : "rx470"
   }
]
}

BAT
SRBMiner-CN.exe --config Config\config-bittubev2.txt --pools pools_tube2.txt

+bios modd mem timings

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 92. (Read 237261 times)