SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 7.

doktor83

hero member

Activity: 2422

Merit: 625

Quote from: d57heinz on August 27, 2023, 07:05:21 PM

any chance for support on radeon pro vii. the titan v works and does mine.. but the radeon cant seem to create dag for ReTHereum. TIA

Output from 2.3.5 windows 11. newest drivers on nvidia and amd

Detecting GPU devices...

GPU0 : nvidia_titan_v [unknown_nvidia][MEM: 12 GB][CU: 80][BUS: 01]
GPU1 : amd_radeon_pro_vii [gfx906 ][MEM: 16 GB][CU: 60][BUS: 04]

======================================================================
SRBMiner-MULTI 2.3.5

Press 's' to display stats
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
======================================================================

Algorithm/s : ethashb3 [1.00% fee]
Gpu mining : enabled
Cpu mining : disabled
Watchdog : enabled
Gpu tweaking : disabled

[2023-08-27 18:02:56] Initializing GPU0
[2023-08-27 18:02:56] Initializing GPU1
[2023-08-27 18:02:56] GPU1 couldn't create program for ctx->algorithm
[2023-08-27 18:02:56] GPU0 |A0|ethashb3 |INTENSITY: 23|
[2023-08-27 18:02:59] Connected to us.vipor.net:5073 [ethashb3]
[2023-08-27 18:02:59] Epoch : 11 [ethashb3]
[2023-08-27 18:03:01] GPU0 1111MB DAG created in 1121ms [ethashb3]
[2023-08-27 18:03:10] Job received [00001847 ] [ethashb3][0]

Dynex is the only supported algo for VII on newer drivers. For other algorithms you must use old drivers. (20.40 on linux)

Jengjeng

newbie

Activity: 7

Merit: 0

Hi Doc,

Some of my rigs in my small farm ran with 414 mallob error with full power over the night without restarting. Profitability's low and power aint cheap either, any way for us to reset the miner when 414 occur?

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

any chance for support on radeon pro vii. the titan v works and does mine.. but the radeon cant seem to create dag for ReTHereum. TIA

Output from 2.3.5 windows 11. newest drivers on nvidia and amd

Detecting GPU devices...

GPU0 : nvidia_titan_v [unknown_nvidia][MEM: 12 GB][CU: 80][BUS: 01]
GPU1 : amd_radeon_pro_vii [gfx906 ][MEM: 16 GB][CU: 60][BUS: 04]

======================================================================
SRBMiner-MULTI 2.3.5

Press 's' to display stats
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
======================================================================

Algorithm/s : ethashb3 [1.00% fee]
Gpu mining : enabled
Cpu mining : disabled
Watchdog : enabled
Gpu tweaking : disabled

[2023-08-27 18:02:56] Initializing GPU0
[2023-08-27 18:02:56] Initializing GPU1
[2023-08-27 18:02:56] GPU1 couldn't create program for ctx->algorithm
[2023-08-27 18:02:56] GPU0 |A0|ethashb3 |INTENSITY: 23|
[2023-08-27 18:02:59] Connected to us.vipor.net:5073 [ethashb3]
[2023-08-27 18:02:59] Epoch : 11 [ethashb3]
[2023-08-27 18:03:01] GPU0 1111MB DAG created in 1121ms [ethashb3]
[2023-08-27 18:03:10] Job received [00001847 ] [ethashb3][0]

doktor83

hero member

Activity: 2422

Merit: 625

V2.3.5
+ Added support for dual mining ETHASHB3/BLAKE3_ALEPHIUM on NVIDIA and AMD RDNA1/2/3 GPUs
+ Minor performance improvement on algorithm 'ethashb3'
+ Minor performance improvement on algorithm 'dynex'
+ Lowered devfee for algorithm 'ethashb3' to 1%
+ Added field 'wallet' to API->algorithms->pool
+ Minor bug fixes

girafa

newbie

Activity: 4

Merit: 0

A huge request to change the output of the failed map not at the end of the entire log, but at the beginning of the failure. Or change the waiting time for the end of the log.

energy_xxx

jr. member

Activity: 122

Merit: 2

RTH+RADİANT+ZİL CONFİG windows

SRBMiner-MULTI.exe --disable-cpu --algorithm ethashb3 --pool RTHPOOL --wallet RTHWALLET --algorithm sha512_256d_radiant --pool RADİANTPOOL --wallet radiant-wallet --zil-enable --zil-pool ZİLPOOL --zil-wallet ZİLWALLET

pause

lncm

member

Activity: 388

Merit: 13

Will SRBMiner support Nvidia cards again with Dynex?

Thanks.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: doktor83 on August 17, 2023, 04:22:59 PM

V2.3.4
+ Added algorithm 'ethashb3' (RETHEREUM coin) support for NVIDIA GPUs
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on NVIDIA and AMD RDNA1/2/3 GPUs
+ Added gfx906 (Vega VII) binaries for algorithm 'dynex' on newer drivers (tested on 22.40.6)
+ Fixed gfx900 mining on algorithm 'dynex' broke in previous version

hello,

any chance you would be adding support for hawaii cards on rethereum. Thanks for considering. im ok with using older drivers if that is necessary. problem with hive when i load newest image it wont recognize cards. so im using a older hive to make it work on the 20.40 ocl drivers.

BR
Doug

p2pguy

newbie

Activity: 1

Merit: 0

I'm getting this error:

Code:

GPU0 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 01]
GPU1 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 02]
GPU2 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 04]
GPU3 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 06]
GPU4 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 08]
GPU5 : amd_radeon__tm__rx_480_graphics       [ellesmere     ][MEM:  8 GB][CU:   36][BUS: 09]

======================================================================
SRBMiner-MULTI 2.3.4

Press 's' to display stats
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
Press + or - to change gpu boost value
======================================================================

Algorithm/s         : dynex [2.50% fee]
Gpu mining          : enabled
Cpu mining          : disabled
Watchdog            : enabled
Gpu tweaking        : enabled

[2023-08-22 16:37:23] Updated capacity with mallob endpoint us2.dynex.herominers.com:1119
[2023-08-22 16:37:23] Preparing data, please wait..
[2023-08-22 16:37:23] GPU0 allocating memory for 428 chips
[2023-08-22 16:37:23] GPU0 couldn't create buf6 [0]
[2023-08-22 16:37:23] GPU0 couldn't setup ctx->algorithm
[2023-08-22 16:37:23] Error while creating GPU workers..
Killed

Any tip to solve this issue? I was mining ERGO just fine before trying DYNEX

Sergey2015

newbie

Activity: 43

Merit: 0

Quote from: doktor83 on August 21, 2023, 05:29:03 AM

Quote from: Sergey2015 on August 20, 2023, 03:04:05 PM

how to setup dual RTH+radiant FOR windows

its in the first post..

thanks, is it possible to run RTH+ZIL, RVN+ZIL?

doktor83

hero member

Activity: 2422

Merit: 625

Quote from: rdome on August 21, 2023, 02:02:58 PM

This Dynex is driving me mad, when mallob file downloads and mining starts and all is working fine untill for some reason
srbminer decides that it is time to pull again same mallob bin file witch is arround 50mb on all rigs simultaneusly.
Then all rigs request same file again 6abfdd7f707d155da0ecef6242593c19.bin, and that apsolutely destroys my 4g internet connection,
so i stopped mining dynex becouse it is only coin that gives me problems.
Is it possible to cash/host mallob file localy so when that moment happends all rigs will pull that file localy.
im currently syncing the dynex node localy in hope that this thing can serve as mallob source, on dynex page i cant find any info how i can host local dynex pool or mallob server, anywhone maybe have solution?

Downloaded file is saved in Cache folder. If you or your OS for some reason delete's the Cache folder's contents then it will re-download it again and again.

rdome

newbie

Activity: 15

Merit: 0

This Dynex is driving me mad, when mallob file downloads and mining starts and all is working fine untill for some reason
srbminer decides that it is time to pull again same mallob bin file witch is arround 50mb on all rigs simultaneusly.
Then all rigs request same file again 6abfdd7f707d155da0ecef6242593c19.bin, and that apsolutely destroys my 4g internet connection,
so i stopped mining dynex becouse it is only coin that gives me problems.
Is it possible to cash/host mallob file localy so when that moment happends all rigs will pull that file localy.
im currently syncing the dynex node localy in hope that this thing can serve as mallob source, on dynex page i cant find any info how i can host local dynex pool or mallob server, anywhone maybe have solution?

doktor83

hero member

Activity: 2422

Merit: 625

Quote from: Sergey2015 on August 20, 2023, 03:04:05 PM

how to setup dual RTH+radiant FOR windows

its in the first post..

Sergey2015

newbie

Activity: 43

Merit: 0

how to setup dual RTH+radiant FOR windows

GugNvc

newbie

Activity: 8

Merit: 0

Quote from: doktor83 on August 17, 2023, 04:22:59 PM

V2.3.4
+ Added algorithm 'ethashb3' (RETHEREUM coin) support for NVIDIA GPUs
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on NVIDIA and AMD RDNA1/2/3 GPUs
+ Added gfx906 (Vega VII) binaries for algorithm 'dynex' on newer drivers (tested on 22.40.6)
+ Fixed gfx900 mining on algorithm 'dynex' broke in previous version

doktor83
Vega VII Linux driver --> 22.40.6
Vega VII Windows 10 driver --> Huh

Please!

doktor83

hero member

Activity: 2422

Merit: 625

V2.3.4
+ Added algorithm 'ethashb3' (RETHEREUM coin) support for NVIDIA GPUs
+ Added support for dual mining ETHASHB3/SHA512_256D_RADIANT on NVIDIA and AMD RDNA1/2/3 GPUs
+ Added gfx906 (Vega VII) binaries for algorithm 'dynex' on newer drivers (tested on 22.40.6)
+ Fixed gfx900 mining on algorithm 'dynex' broke in previous version

Did7N

newbie

Activity: 5

Merit: 0

Thanks for adding 'ethashb3' (RETHEREUM coin). But on Vega 56, only half the hashrate (25 mh).

doktor83

hero member

Activity: 2422

Merit: 625

V2.3.3
+ Added algorithm 'ethashb3' (RETHEREUM coin) for GPU mining, fee 2% [AMD only]*
+ Minor performance improvement on algorithm 'dynex' [Dynexcoin]
+ Bug fixes for algorithm 'dynex'*
+ Minor bug fixes

***
ethashb3:
NVIDIA support will be available in next release

***
dynex:
Upgrading to this release is advised because of better mallob handling and other fixes

turik500

newbie

Activity: 1

Merit: 0

Quote from: doktor83 on August 06, 2023, 05:08:20 AM

V2.3.2
+ Performance improvement on algorithm 'dynex' [Dynexcoin]
+ Added parameter '--gpu-dynex-r' (performance tuning for algorithm 'dynex' - min 1, max 16)
+ Removed auto tuner for algorithm 'dynex' [it was causing data reporting issues]
+ Minor bug fixes

Hello,
I have problem with mining DYNEX on Radeon VII. Can not start miner. Miner gives the next error and restarts:
[2023-08-16 16:53:43] Preparing data, please wait..
[2023-08-16 16:53:44] GPU0 allocating memory for 800 chips
[2023-08-16 16:53:44] Initializing GPU0
[2023-08-16 16:53:44] GPU0 couldn't create program for ctx->algorithm
[2023-08-16 16:53:44] GPU1 allocating memory for 800 chips
[2023-08-16 16:53:44] Initializing GPU1
[2023-08-16 16:53:44] GPU1 couldn't create program for ctx->algorithm
[2023-08-16 16:53:44] No worker devices found
[2023-08-16 16:53:44] Releasing GPU resources...

OS-is RAVEOS Miner version is the last one - SRBminer 2.3.2
Tried with over clocks and without them. The same thing happens in both variants.
Please help.
Thank You

at794234

newbie

Activity: 1

Merit: 0

Quote from: doktor83 on August 06, 2023, 05:08:20 AM

V2.3.2
+ Performance improvement on algorithm 'dynex' [Dynexcoin]
+ Added parameter '--gpu-dynex-r' (performance tuning for algorithm 'dynex' - min 1, max 16)
+ Removed auto tuner for algorithm 'dynex' [it was causing data reporting issues]
+ Minor bug fixes

Hello doktor83, need your help please!
I'm trying to mine ergo+kaspa with SRBMiner 2.3.2 (never used SRBMiner before), but it stops mining with error message:
"Couldn't connect to a devfee pool for a long time
Please check you firewall/antivirus is not blocking connections
Mining will be paused"
So the miner becomes unusable :-(
My setup: Windows 10 based AMD rigs, Linux iptables-based stateful firewall with NAT on the edge of my network with Internet exit in Germany. All outgoing connections are allowed. I have no antiviruses etc. on my rigs - nothing besides Windows itself, AMD drivers and miners. Also, I turned off Windows firewall completely on that rig and it did not help. I have never had such issues with other miners (xmrig, NBMiner, Teamredminer, lolMiner etc.)
Could you pls advice how to fix this problem?
Thank you!

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 7. (Read 42257 times)