Topic: Swedish ASIC miner company kncminer.com - page 1160. (Read 3049528 times)
Eligius down?
Good morning Phoenix.
I should add that I'm running my machine in a bit lower temps as well (closer to 60 reported, hard to say if it makes a big difference in 0.98, in 0.95 it was a huge difference for my machine from ~60 to ~70), so we have a dwindle down in both "cold" (present mine) and "hot" machines (yours and waterboi).
I should add that I'm running my machine in a bit lower temps as well (closer to 60 reported, hard to say if it makes a big difference in 0.98, in 0.95 it was a huge difference for my machine from ~60 to ~70), so we have a dwindle down in both "cold" (present mine) and "hot" machines (yours and waterboi).
and Yeah... I do notice the "Dwindledown" overnight....
+1
Wonder if the unnoficial 0.98.1 does anything about it.
I sure hope there's a 0.99 in the works...yeah....
Wonder if they even know what causes that..?
It's got me baffled.
edit... Eligius stats page down again....
and again....
and again....
seems to be the norm for eligius...
but I sure like that doggone graph... it makes an excellent diagnosis/monitoring tool..
and Yeah... I do notice the "Dwindledown" overnight....
+1
Wonder if the unnoficial 0.98.1 does anything about it.
any jupiter owners running .98 notice that the hashrate is highest when you do a poweroff cycle and reboot, it will hit 565-575gh/s at the pool and then after running for a while the pool listed hash rate will get progressively lower, i dip at 490gh/s
any idea why this is?
any idea why this is?
This is exactly what happens to mine, maybe even lower, 470, 460... no idea why
24 hours later.. my 3 sats are 850 at the pool on 12 hour average!
that's 283 each, which is exactly what they show on cgminer!
what are your temp readings? how are your fans/case set up? im thinking of following you, doing enable core, and rebooting and then putting case on upside down to raise the temps a bit and see if i still get a down slide in hashes over time with higher temps.
All running 0.98 with enablecores over top
this is for night-time basically, because it gets downright chilly in here.
During the day, I can remove the cardboard, and they stay around 70
Ive tried several times to leave them off... but if they drop below those
temps by more than about 5 degrees, I see a drop in my rates, and can
see one one miner loose about 6 cores, and another loose two...
then they take forever to come back, like 6-8 hours!
I have one miner that is super-rock solid, one a tad finicky,
and one super-sensitive finicky, don't breathe near me kind
Also, It may just be my imagination, but they seem to work better
while its raining outside(high humidity)
thanks for sharing, phoenix!
i can confirm that after putting my case on entirely and raising the temp by about 8-9 degrees my hashrate has remain steady back in the 550-570gh/s on btcguild pool readings.
and Yeah... I do notice the "Dwindledown" overnight....
That's the final thing I'd like to "nip in the butt" hope they are working on it...
I too find myself re-booting about every morning & eve to retain those peaks...
So, going back to the context of that reply, you're mining for food/debts?
No... Still anyone alive have to eat. Guess what? They need to pay the food with fiat money, otherwise they will have to depend on people's good will to survive.
What are you mining for?
I'll tell you what I'm not mining for:
I did not pay thousands of dollars to get a magic printing money machine that I'm counting on to pay my bills and to survive (even if I have to admit I did my best to treat it as an investment, reason why I didn't buy BFL early in the year or anything incredibly stupid like that).
And here's what I think the real drive for mining is:
Sorry, I meant the Sierra (3rd batch) for $6k, but I'm even surprised that the Jupiter (being a very new unit) wouldn't ever give a ROI. So if this is true even you experienced miners are constantly buying new hardware all the time.. your fancy new units at best will be obsolete after a few months? Sorry, I'm just trying to get my mind around this. Even if profit isn't your only concern, this seems like a pretty crazy arms race.
People pay tons of money for backyard greenhouses and perfect soil to grow a few over priced tomatoes. Wouldn't they get more tomatoes for the same money at the store? Even bio-eco-super tomatoes? Sure! It's the same drive for miners.
The only people benefiting monetarily from mining are the ASIC manufacturers and... Bitcoin USERS!
So, going back to the context of that reply, you're mining for food/debts?
No... Still anyone alive have to eat. Guess what? They need to pay the food with fiat money, otherwise they will have to depend on people's good will to survive.
What are you mining for?
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
Good for you, no? You may buy more promising sound currency cheap...
Yeah, because my goal with that comment was to manipulate exchange rates higher.
Seems like I'm turning into troll bait. I'll make an effort to reduce my number of posts for the sake of this heavily trashed thread.
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
Good for you, no? You may buy more promising sound currency cheap...
Without trading, how we find the value of our BTC anyway
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
Because in the real world utility bills, financial contracts, tax obligations, etc. are paid with... Fiat money?
Your "promising sound currency" is just that, a promise which did not became reality (yet?), while your "exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency" is what everyone in all civilized nations use to pay their debts.
So, going back to the context of that reply, you're mining for food/debts?
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
Because in the real world utility bills, financial contracts, tax obligations, etc. are paid with... Fiat money?
Your "promising sound currency" is just that, a promise which did not became reality (yet?), while your "exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency" is what everyone in all civilized nations use to pay their debts.
Thanks for sharing.
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
I meant to say he replaced a mal-functioning/missing component, that it was not a mod to help. Yeah, resistance is probably a lot easier to change than a DC/DC. Good job nonetheless Amolina and thanks for sharing.
I do not speak of replacing the module dc / dc is very complicated. The module in my saturn was not broken. A protective resistor is the one that was burned. I have encontado that breakdown in my Saturn and then put a new one is running at 100%.
regards
Quitando el estaño con el Flux de soldar
Removing the tin welding Flux
Yo des soldé el condensador por equivocación y además lo perdí. Yo he puesto uno de sustitución de un valor arbitrario, no creo que sea un valor crítico. El condensador es un condensador de desacoplo. La resistencia es de 1 ohmio 1% de tolerancia. Yo supongo que esta resistencia es un fusible para proteger el circuito (corto circuito). Si esto fuera cierto se podría puentear solo que el circuito estaría sin protección (no me he atrevido ha hacerlo).
I soldered the capacitor des plus accidentally missed it. I have put one of substituting an arbitrary value. I do not think it's a critical value. The capacitor is a decoupling capacitor. The resistance is 1 ohm 1% tolerance. I guess that this resistance is a fuse to protect the circuit (short circuit).
Yo he puesto mi Saturno en peligro y he perdido la garantía.. A ti, te ha servido mi trabajo?. Considera un donativo. Muchas gracias.
Donativos trabajo en Saturno KnC - 15PrLvas1yoS7sTrV8s12zx5uYNVwLJ7Qg
I set my Saturn in danger and I lost the warranty. To you my work has helped you?. Consider a donation. Thank you very much.
Donativos trabajo en Saturno KnC - 15PrLvas1yoS7sTrV8s12zx5uYNVwLJ7Qg
Thanks for sharing.
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
It was posted here before. He had a busted DC/DC and replaced it.
Would you mind about posting the link to the previous post containing those details, please ?
Thanks.
edit:
* as far as I can remember the post did not contain such things, just the 'how to'
**maybe I do mix this up with another guy playing around and posting quite similar pics ?
I can remember some electrical resistance I do not see on those pics
Thanks for sharing.
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
It was posted here before. He had a busted DC/DC and replaced it.
Thanks for sharing.
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
Care about any technical explanation and background info why this exactly might help, how it might help and what side effects are possible?
a piece
un trozo
https://bitcointalksearch.org/topic/reparacion-kncminer-saturno-fallo-dcdc-323718
AVERIA DC/DC RESUELTA
HAZ LO BAJO TU RESPONSABILIDAD. YO NO DOY NIGUNA GARANTIA. MI SATURNO AHORA FUNCIONA. TRABAJO DELICADO Y MUY PRECISO. TU TIENES QUE TENER EXPERIENCIA EN SOLDADURA CON ESTAÑO.
FAULT DC/DC RESOLVED
MAKE IT YOUR OWN RISK. I DO NOT GIVE NONE WARRANTY. MY SATURN DOES NOW. DELICATE WORK AND VERY ACCURATE. YOU MUST HAVE EXPERIENCE IN WELDING TIN.
ANTES
BEFORE
DESPUES
AFTER
NO SE PUEDE OBSERVAR A SIMPLE VISTA. HAVE A LOOK WITH GLASS
las imágenes hablan por si solas. the images speak for themselves.
continued .....
Continua.... https://bitcointalksearch.org/topic/reparacion-kncminer-saturno-fallo-dcdc-323718
Saludos.
just hope we don't see a "toboggan run" down this steep slope when everyone xfers their BTC to USD in a panic to get ROI back.
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
There are people who-need-to-pay-bills-in-USD-and-dont-holding-much-USD-anymore.
I agree, spend USD first, but when you dont have more, you need to use BTC
there are ~3.600BTC a day, imagine the impact each and every miner would really sell all mined coins each day
..exactly, it won't matter at all as it would be 10-15% of coins transfered in 1h, stop hunting ghosts
some data from bitcoinwatch.com
---------------------------------------------
Total BTC 11,942,925 BTC
Market Cap based on latest prices 2,340,813,300 USD
or 1,849,959,083 EUR
or 7,738,895,971 PLN
or 1,569,491,193 GBP
Transactions last 24h 37,057
Transactions avg. per hour 1544.04
Bitcoins sent last 24h 590,528.10 BTC
Bitcoins sent avg. per hour 24,605.34 BTC
just hope we don't see a "toboggan run" down this steep slope when everyone xfers their BTC to USD in a panic to get ROI back.
Why would anyone want to convert a promising sound currency for an exponentially-printed-to-oblivion/give-inflation-to-bankers-enslave-everyone-else/no-control-over-your-money corrupt currency?
There are people who-need-to-pay-bills-in-USD-and-dont-holding-much-USD-anymore.
I agree, spend USD first, but when you dont have more, you need to use BTC
Read this post. Someone dares to look his KnCMiner and check that yours is the same way?
lee este post. Alguien se atreve a mirar su KnCMiner y comprobar que al suyo le pasa lo mismo?
https://bitcointalksearch.org/topic/reparacion-kncminer-saturno-fallo-dcdc-323718
Saludos.
Jump to: