I pulled out the Cristal from the qberty board and it powers up with the raspberry on it and the leds work.
So Mr. qberty your manufacture-fabric mess it up with the crystal, probably is a wrong number and causes sort to the bridge.
Can you tell us the numbers of the correct crystal that it should be there ?
I want to order 2 crystals and finally make my 2 qberty's bridges functional.
What does this crystal do ? will it work without ?
Topic: Swedish ASIC miner company kncminer.com - page 14. (Read 3049520 times)
Qberty I appreciate what you are trying to do for the community and I don't want to make you angry but my bridge board is not working. Could you post that video of how you are plugging them in. Maybe I am doing something wrong. Would not be the first time.
See now that's a normal claim. I'll be happy to upload a detailed video of me plugging them in and showing them working. Stay tuned for that.
Qberty I appreciate what you are trying to do for the community and I don't want to make you angry but my bridge board is not working. Could you post that video of how you are plugging them in. Maybe I am doing something wrong. Would not be the first time.
Because I asked you to post here, then a little bit from you PM.
So here is what I have done in testing.
I tested the Pi. Working. Booted to a raspbian Jessie lite image. I then reflashed a knc titan image to the micro ssd and booted the pi with just that. I can see the red power button light up.
I then attached the bridge board along with the old knc Jupiter board and the pi. Powered up and no red power light.
I have tested the knc Jupiter board and it works. Got to the web interface and the KNC logo.
As a final test I removed the bridge board on my working Titan controller and replace it with Qberty bridge board. Nothing.
So I too have a defective Qberty bridge board. Sucks. Was hoping to get another Titan controller going.
I tested the Pi. Working. Booted to a raspbian Jessie lite image. I then reflashed a knc titan image to the micro ssd and booted the pi with just that. I can see the red power button light up.
I then attached the bridge board along with the old knc Jupiter board and the pi. Powered up and no red power light.
I have tested the knc Jupiter board and it works. Got to the web interface and the KNC logo.
As a final test I removed the bridge board on my working Titan controller and replace it with Qberty bridge board. Nothing.
So I too have a defective Qberty bridge board. Sucks. Was hoping to get another Titan controller going.
I can only tell you that you are not alone. One from B2 buyer is not yet posted in this thread about his problem with Qberty B2 bridge board.
I am want my money back or 2 bridges that are working.
Can someone from Batch2 buyers confirm, that this product is working with his Titan ?
I have not received mine from US , but I always assumed that they all working.
Only one is shipped to me from the US , and this does not work. Behaves exactly as described above.
The rest 9 pc will come later in the hand luggage.
However, even if they all do not work , they must be with one and the same type of design error, and therefore easy to repair.
So I do not worry today about it working or not working status.
No design error. But if more than just you two report non working bridges i'll just upload a video of me plugging a bunch in and seeing them work.
Qberty I appreciate what you are trying to do for the community and I don't want to make you angry but my bridge board is not working. Could you post that video of how you are plugging them in. Maybe I am doing something wrong. Would not be the first time.
I love that everyone is asking to meet their grandma, but the fact is there are no specs except dimensions and weight. It could do 3.14MH/s and need a small nuclear reactor to power it 
Well looks like Kncminer now is gonna get bought out. (or has been) see below from coindesk
GOOD!
Can someone see if the new owners will send over the bill of materials for a Titan? The level converters are something I can't seem to source (along with the displays), a BOM and a traceout of the board would be exceptionally useful.
Heck, I'd even tell them how to wire up the optoisolator to keep these things from blowing up.
C
I'll have a chat and see what's up.
Well looks like Kncminer now is gonna get bought out. (or has been) see below from coindesk
GOOD!
Can someone see if the new owners will send over the bill of materials for a Titan? The level converters are something I can't seem to source (along with the displays), a BOM and a traceout of the board would be exceptionally useful.
Heck, I'd even tell them how to wire up the optoisolator to keep these things from blowing up.
C
Well looks like Kncminer now is gonna get bought out. (or has been) see below from coindesk
http://www.coindesk.com/knc-miner-acquisition-gogreenlight/
Got to give knc evil cred thou. They NEVER on their main page said anything about bankruptcy in any way shape or form ..even now
http://www.kncminer.com/
They managed (though knc insiders I presume) to keep the majority (approx 215 Titan miners) for themselves with their super secret sale.
(Notice how they contact coindesk with news they want but hide news like the fact 215 scyrpt miners were sold this year ..when no scrypt
miners are being sold or manufactured this year...but hey....can't do that ....have to rig the process)
I got 6 out of 24 first batch (we found out by accident asking a question vie Kurt's old tech email the main page emails on above kncminer.com link does not work..
thus the lawyer told us about it)..this was a closed auction. The next few auctions of the remaining 200 or so miners *used and new* were open auctions..which means you can
see what was bid. This is helpful so 'smucks' like me and my friend don't take your 1st 24 batch 2 5 cube miners away from you (then again 20% damage error rate by temp
workers and wrong thermal paste on the works and shipping/packaging sucked also added to damage....but hey it was knc and evil we expected no less)
Thus we were crushed by whales...specifically imho KNC in the fact are you really going to bid up on the 140 or so miners you now have 100 bucks to get the last 20?
(er well ROI from what I figured at 3-4c kwh in Boden Sweden was 3 months so maybe)
but anyway 'super secret double probation open bid auctions' (after losing 1st batch to me and a buddy) ....the lawyer imho still thinks he sold us btc miners
So getting the only real profitable stuff out the door in the data hall (Titans) they have unloaded now the BTC stuff to this new group of folk which will keep knc folk working there
(not the founders) but still....I sense a future bankruptcy/ train wreck. Feel sorry for the IPO folk who put money into this ..they got soooooo screwed.
Anyway my view for what it is worth on a rather 'interesting' end to KNC which I managed to not only WIN (they are bankrupt) but score some equipment.
(Calling it a win.....despite the knc insiders/founders getting millions and hot Swedish Trophy Wives....I'm in denial .but damn it I'm calling it a win!)
Denial .....sometimes the only way to boost your ego in this deluded ASIC kool aid drinking endeavor.....
Problem is not that I got 6 new miners I want more..argh! (stupid hobby)
But damn..got to admit even now that they are gone they lived up to their motto to the last.
KNC: We do evil well. (tm knc)
http://www.coindesk.com/knc-miner-acquisition-gogreenlight/
Got to give knc evil cred thou. They NEVER on their main page said anything about bankruptcy in any way shape or form ..even now
http://www.kncminer.com/
They managed (though knc insiders I presume) to keep the majority (approx 215 Titan miners) for themselves with their super secret sale.
(Notice how they contact coindesk with news they want but hide news like the fact 215 scyrpt miners were sold this year ..when no scrypt
miners are being sold or manufactured this year...but hey....can't do that ....have to rig the process)
I got 6 out of 24 first batch (we found out by accident asking a question vie Kurt's old tech email the main page emails on above kncminer.com link does not work..
thus the lawyer told us about it)..this was a closed auction. The next few auctions of the remaining 200 or so miners *used and new* were open auctions..which means you can
see what was bid. This is helpful so 'smucks' like me and my friend don't take your 1st 24 batch 2 5 cube miners away from you (then again 20% damage error rate by temp
workers and wrong thermal paste on the works and shipping/packaging sucked also added to damage....but hey it was knc and evil we expected no less)
Thus we were crushed by whales...specifically imho KNC in the fact are you really going to bid up on the 140 or so miners you now have 100 bucks to get the last 20?
(er well ROI from what I figured at 3-4c kwh in Boden Sweden was 3 months so maybe)
but anyway 'super secret double probation open bid auctions' (after losing 1st batch to me and a buddy) ....the lawyer imho still thinks he sold us btc miners
So getting the only real profitable stuff out the door in the data hall (Titans) they have unloaded now the BTC stuff to this new group of folk which will keep knc folk working there
(not the founders) but still....I sense a future bankruptcy/ train wreck. Feel sorry for the IPO folk who put money into this ..they got soooooo screwed.
Anyway my view for what it is worth on a rather 'interesting' end to KNC which I managed to not only WIN (they are bankrupt) but score some equipment.
(Calling it a win.....despite the knc insiders/founders getting millions and hot Swedish Trophy Wives....I'm in denial .but damn it I'm calling it a win!)
Denial .....sometimes the only way to boost your ego in this deluded ASIC kool aid drinking endeavor.....
Problem is not that I got 6 new miners I want more..argh! (stupid hobby)
But damn..got to admit even now that they are gone they lived up to their motto to the last.
KNC: We do evil well. (tm knc)
...
Goal is to keep people mining.
Goal is to keep people mining.
This. When I send you some of my unworking cube boards, i'll throw in my own bridges so you can take a look of how they can be improved (though honestly, i've tried a lot of prototyping and no matter what I do to the bridge, the RPi and controller board just messes with shit).
Hm.
Ok, some rambling thoughts here from someone who does his best to try and fix these things. Let's start by keeping the following in mind:
1) Titans, and most bitcoin mining equipment made are not the paragons of reliability or consistency. Ok, they're crap. Total and complete crap. We bought crap. This is not consumer grade stuff, and if it was made to be that, we would never have it. Economies being what they are, people want the fastest cheapest shit you can get NOW, and the mining companies cater to this. They have to, if they don't someone else will and they go out of business.
Which is sad since a simple optoisolator circuit on the Titan would totally fix 95% of the major failures. Probably cost a dime. But not done. Oh well.
2) Given (1), this stuff blows up. Yes, it sucks, I understand that. But especially when people run things full-bore, don't keep the equipment clean, and don't keep an eye on things, they blow up. There are few safties built into this stuff, and while the builder would expect people to run them in a 70f data center people run them in fracking barns.
3) Fixing this crap is hard. Designing solutions is hard. You're talking no documentation, no manuals, no support, the people who built it either got out of business, are focused on new models, or enjoy spitting on you for stress relief. So when it does blow up, either someone steps up to try and fix it, or you're fucked.
4) Even given (3), the wide variety of ways one can screw up installs makes fixing this stuff even more fun.
And the biggie:
5) If you want people to try and fix this stuff, try not to flame them too hard. I'm sure you're frustrated, the vendor ignores you, and it might feel nice to take the stress out on someone who is trying to do something. This is complex: Too much flamage and they stop fixing things. Then the community is back to 2 and fucked.
I don't know qberty, or most people. I think it's pretty simple to see why the bridgeboards blow up: KNC did a suck job of not fusing the fucking inputs. And people run these things on mammoth power supplies that will happily source 5 volts at 200 amps into a Raspberry Pi that decided to blow up and expects 1 amp of power from a USB cable. Sure I can fix these, but if the person plugs in the same burned out Rpi with the same tank power supply the result will be the same. Foom. So now what?
Qberty took some time and actually built a new board. Cool, but as we're figuring out the problem isn't just the bridgeboard it's the lack of a fucking fuse to limit current and the fact that the Rpi's are kind of cheap and short out. So if you blow your bridgeboard and you put in a new one, and the Pi is still fucked the result will either be the same or something else on the board will blow open. Or the power supply cable will fail open.
Point is if you flame his ass too much he will send you back your .2btc and just quit. Or tell you tough and just quit. Which is bad, if we want these things to keep running we need more people to fix them. That's why I write all that technical crap in my posts, so other people can FIX them. Because Bitcoin/Litecoin/Shitcoin needs all the help it can get to succeed.
Fixing this stuff isn't simple: I just had someone's unit come in that blew a power supply so hard it cracked FETs. When I pulled the supply things looked ok so I put it on my test controller. Whereby it promptly burned out my test controller, setting me back a week while I got more damn power and FPGA chips to fix it. The thing blew up so hard it took out the supply next to it and shorted +12 right onto the SPI line. Fucking great. It's frustrating but I deal. And I tell people whenever possible to slow the things down because they blow up less at 60mh and lower. Ok, let's not go there :-)
I'd be happy to look at one of these bridgeboards, but I'm not going to flame people publicly if they're actually trying to help Titan miners. It might be a simple error, it honestly might be a bad board, it could be something on the controller or the cable or the Titans that blow the board up. See above for "anything can happen with these things". They're unpredictable, they were made that way. Because it was quick and cheap. Let's keep that in mind and relax the flamage a bit.
Goal is to keep people mining.
Ok, some rambling thoughts here from someone who does his best to try and fix these things. Let's start by keeping the following in mind:
1) Titans, and most bitcoin mining equipment made are not the paragons of reliability or consistency. Ok, they're crap. Total and complete crap. We bought crap. This is not consumer grade stuff, and if it was made to be that, we would never have it. Economies being what they are, people want the fastest cheapest shit you can get NOW, and the mining companies cater to this. They have to, if they don't someone else will and they go out of business.
Which is sad since a simple optoisolator circuit on the Titan would totally fix 95% of the major failures. Probably cost a dime. But not done. Oh well.
2) Given (1), this stuff blows up. Yes, it sucks, I understand that. But especially when people run things full-bore, don't keep the equipment clean, and don't keep an eye on things, they blow up. There are few safties built into this stuff, and while the builder would expect people to run them in a 70f data center people run them in fracking barns.
3) Fixing this crap is hard. Designing solutions is hard. You're talking no documentation, no manuals, no support, the people who built it either got out of business, are focused on new models, or enjoy spitting on you for stress relief. So when it does blow up, either someone steps up to try and fix it, or you're fucked.
4) Even given (3), the wide variety of ways one can screw up installs makes fixing this stuff even more fun.
And the biggie:
5) If you want people to try and fix this stuff, try not to flame them too hard. I'm sure you're frustrated, the vendor ignores you, and it might feel nice to take the stress out on someone who is trying to do something. This is complex: Too much flamage and they stop fixing things. Then the community is back to 2 and fucked.
I don't know qberty, or most people. I think it's pretty simple to see why the bridgeboards blow up: KNC did a suck job of not fusing the fucking inputs. And people run these things on mammoth power supplies that will happily source 5 volts at 200 amps into a Raspberry Pi that decided to blow up and expects 1 amp of power from a USB cable. Sure I can fix these, but if the person plugs in the same burned out Rpi with the same tank power supply the result will be the same. Foom. So now what?
Qberty took some time and actually built a new board. Cool, but as we're figuring out the problem isn't just the bridgeboard it's the lack of a fucking fuse to limit current and the fact that the Rpi's are kind of cheap and short out. So if you blow your bridgeboard and you put in a new one, and the Pi is still fucked the result will either be the same or something else on the board will blow open. Or the power supply cable will fail open.
Point is if you flame his ass too much he will send you back your .2btc and just quit. Or tell you tough and just quit. Which is bad, if we want these things to keep running we need more people to fix them. That's why I write all that technical crap in my posts, so other people can FIX them. Because Bitcoin/Litecoin/Shitcoin needs all the help it can get to succeed.
Fixing this stuff isn't simple: I just had someone's unit come in that blew a power supply so hard it cracked FETs. When I pulled the supply things looked ok so I put it on my test controller. Whereby it promptly burned out my test controller, setting me back a week while I got more damn power and FPGA chips to fix it. The thing blew up so hard it took out the supply next to it and shorted +12 right onto the SPI line. Fucking great. It's frustrating but I deal. And I tell people whenever possible to slow the things down because they blow up less at 60mh and lower. Ok, let's not go there :-)
I'd be happy to look at one of these bridgeboards, but I'm not going to flame people publicly if they're actually trying to help Titan miners. It might be a simple error, it honestly might be a bad board, it could be something on the controller or the cable or the Titans that blow the board up. See above for "anything can happen with these things". They're unpredictable, they were made that way. Because it was quick and cheap. Let's keep that in mind and relax the flamage a bit.
Goal is to keep people mining.
Still you don't believe us that your bridges are not working ?
Should I make you a video ? I just need 15 min and you can have a video comparing your clone bridge with the original bridge
You could have blown something or broke something yourself. A video after the fact is useless.
I am want my money back or 2 bridges that are working.
Can someone from Batch2 buyers confirm, that this product is working with his Titan ?
I have not received mine from US , but I always assumed that they all working.
Only one is shipped to me from the US , and this does not work. Behaves exactly as described above.
The rest 9 pc will come later in the hand luggage.
However, even if they all do not work , they must be with one and the same type of design error, and therefore easy to repair.
So I do not worry today about it working or not working status.
No design error. But if more than just you two report non working bridges i'll just upload a video of me plugging a bunch in and seeing them work.
Still you don't believe us that your bridges are not working ?
Should I make you a video ? I just need 15 min and you can have a video comparing your clone bridge with the original bridge
I am want my money back or 2 bridges that are working.
Can someone from Batch2 buyers confirm, that this product is working with his Titan ?
I have not received mine from US , but I always assumed that they all working.
Only one is shipped to me from the US , and this does not work. Behaves exactly as described above.
The rest 9 pc will come later in the hand luggage.
However, even if they all do not work , they must be with one and the same type of design error, and therefore easy to repair.
So I do not worry today about it working or not working status.
No design error. But if more than just you two report non working bridges i'll just upload a video of me plugging a bunch in and seeing them work.
I am want my money back or 2 bridges that are working.
Can someone from Batch2 buyers confirm, that this product is working with his Titan ?
I have not received mine from US , but I always assumed that they all working.
Only one is shipped to me from the US , and this does not work. Behaves exactly as described above.
The rest 9 pc will come later in the hand luggage.
However, even if they all do not work , they must be with one and the same type of design error, and therefore easy to repair.
So I do not worry today about it working or not working status.
People this is the update from qberty in pm
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
God sees me? Yeah, I will help anyone who is nice to me. If you call me a liar and insult me for no reason, than yeah, i'm not going to help you. It's a pretty simple human concept.
What are you trying to do now ? I didn't call you liar but you did by not believing me.
Don't try to avoid the fact that your bridges are not function.
Any solution for that ?
People this is the update from qberty in pm
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
God sees me? Yeah, I will help anyone who is nice to me. If you call me a liar and insult me for no reason, than yeah, i'm not going to help you. It's a pretty simple human concept.
People this is the update from qberty in pm
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
''You're right, it's not a solution to keep your bitcoins if you're not satisfied with the product. I DID test the product before sending it out. Every one of the bridges from this second batch has been working. I've tested them with three different controller boards. Unfortunately, I can't give your a refund or replace the boards as you could have burned them out and be making up this story. That's just business. The nature of these products are like that and when you're dealing with KNC's controller boards, they aren't made that well. My bridge remakes are a simple board that connects pins to other pins with a small voltage regulator. If none of that is blown out, than the board is as designed. We can go back and forth all day but at the end of the day my position stays the same. I can't refund or replace the boards as it's high risk that i'm being scammed. Since they are KNC originals, if they have a support team left they should still be obligated to help you. But i'm not. I just follow the specification and sell them. I'm not being an ass here. You're the one that is calling me a liar. I don't respond well to that and it makes me not want to help you. So I wont.''
So his idea is that if you sell KNC products in this forum you don't have to worry if they are working or not, you will just make bitcoins and let the buyers to complain.
How can you tell me to contact KNC support when you are the one that re-fabricate and sold me the bridges.
My titan setup is working (mining) and by switching to your bridge it does not, no lights blinking, so even a kid 5 years old will understand the the bridge is the problem.
Nice Mr. 'qberty' you really help the forum and the btc community.
God sees you, one day it will come back to you that.
For the record 'qberty' you didn't help me at all and I already contacted Lightfoot he is really polite and nice person.
Also on your re-fabricated bridges is written on them re-made by qberty 2016, and as you told me 'It's literally the original with stronger tracks'.
That means you copy their design and you just added thicker copper layer.
I am not stacking on that, good that you did it in order to provide to titan owners a solution when they need a bridge ! But it's not a proper behavior to blame the buyers that they try to get more bridges for free. I was happy to pay the price of 0.2btc / bridge but I am not happy to pay 0.4 btc and two have to non working bridges. I am not having a chicken that makes bitcoins like this
Also on your re-fabricated bridges is written on them re-made by qberty 2016, and as you told me 'It's literally the original with stronger tracks'.
That means you copy their design and you just added thicker copper layer.
I am not stacking on that, good that you did it in order to provide to titan owners a solution when they need a bridge ! But it's not a proper behavior to blame the buyers that they try to get more bridges for free. I was happy to pay the price of 0.2btc / bridge but I am not happy to pay 0.4 btc and two have to non working bridges. I am not having a chicken that makes bitcoins like this
Still have not received anything in Florida.
Today, the package arrived in Florida. Of course, with traceable service, according to which it is posted at the same time as the other buyers packages.
Everyone does their own conclusions .. who lied, and for what reason.
Anyway, with a seller who writes his largest buyer of goods all this crap, I do not want to have anything to do in the future.
Well thank god you'll shutup about it now. Though don't assume you're the largest buyer of my "goods". I don't only sell those bridge boards. But it was hell dealing with you as a customer. So there's that.
'qberty' your clone titan bridges that you sent me do not work, they don't even let a new raspberry pi with titan firework in it to power up connected through usb.
Don't accuse people that they lie.
I spent 0.4 btc for two new heavy duty titan bridges and I got from you 2 non working.
Follow the laws and replace them or refund
Your China fabric that cloned mess it up, we will not pay for their mistake and your lies that were working.
I am want my money back or 2 bridges that are working.
Just so everyone can see. You're not getting a refund after all that shit you said in PM. You're not getting a replacement because according to the photo's, my boards are intact, the tracks haven't even blown. You don't want to check your Pi, or controller board, so that's your fault. I'm also not going to help you troubleshoot because you want to cause such a fuss. Also, for your information, you have no idea how these boards were fabricated and I can tell you they aren't chinese.
You're the second person to call me a liar aside from Tupsu. He was slammed to be completely wrong, and so will you. These boards aren't like complicated phones or master circuitry, the defective gray zone is too small, and becomes nonexistent when I test them before shipping it out. Yours was fully working. I'm not going to go through this with you like Tupsu. If you don't like it for some reason, don't buy my bridges. Good luck finding/getting them though. I'm the only one that makes them exactly like KNC's original.
Maybe if you talk to lightfoot, (he knows how it works) maybe he can get you something working, because I am not going to help you again.
I ordered you the two bridges because i need them.
I don't have broken-burn hardware i just need more controllers.
When i am putting your bridges in my working system to test them they don't let the raspberry to start.
Even without the knc board the raspberry connected to your bridges is not working when with my original knc bridges works.
[/quote]
Try turning on the Pi and see if it turns on by itself. The boards are the exact same design and I have tested every single one of them before shipping.
[/quote]
I did it and the pi alone it turns on and works perfect.
It's pretty obvious that the bridges are defect
[/quote]
The bridges don't defect like that.if the pi doesn't turn on AND the bridges dont turn on then the controller board isnt supplying the power, OR you blew the bridge board by not safeguarding when plugging it in.
[/quote]
Are you serious now ? I don't have any defect boards, I am telling you that you sent me defect boards, both of them they don't work.
So I am expecting a solution here, is your mistake that the hardware is not working not mine !
Send a replacement or my coins back (0.4 btc)
[/quote]
Sorry there are no refunds as you could have easily burnt the boards out and just want free boards. Please take a picture of them both front and back and I can see if something can be done. But i'm telling you right now, due to the nature of these products, you will not get a refund, nor will I send you a free board. You're the first and only person to complain about my bridges. A couple people blew them without knowing it, and needed to replace them which I did for them for a cheaper price, but honestly you saying they are defective and demanding a refund/replacement isn't going to help your situation. I'm the only one that makes these boards. There are no moving components and nothing on the board that can even be "defective". So if you want help finding your problem, then I can help you but if you strictly blame my boards then I don't need to help you.
[/quote]
You sent me your defect boards and now I am in the bad situation to prove that they don't work
I will make a video and send it to you and also public to see what you send me.
I will not lose 0.4 btc like that Sir.
[/quote]
Do what you need to do. But only you have been complaining that the boards don't work. Which is funny, because I test all my boards before shipping them out. So right now you just sound like someone who blew out the boards and are trying to get more. I will not lose more boards like that Sir.
[/quote]
I really don't do that,
I didn't blew out any board.
Can you help me fix your boards ? maybe you miss to connect well a component ?
Can i do something to check it ?
To me it looks that somewhere is a sort because when i connect it to a raspberry it make it to don't work
So you know how it is made your board please tell me what to check to verify it and find the problem.
I really need these 2 bridges to work
[/quote]
Show me a close up picture of both your bridges AND the raspberry Pi front and back so I can take a look.
[/quote]
Your batch 2 looks like that it has defects, Tupsu also had problems...
I am letting you know that I am requesting you today 14 August 2016 a refund of 0.4 Btc for the two defective knc titan bridges (clones) that you sent me.
My btc address is : 1EmkyMsUPHvtAJZuunpMgmJs9A5zxZGJEZ
I asked a lawyer and he said that by the law you are obligated for new products to replace or refund them.
I already sent you yesterday the pictures that you asked me.
[/quote]
Tupsu would say anything as I had a fight with him. Your lawyer doesn't know what he's talking about as I do not have a registered company selling these products (as they are KNC made). If you want a refund legally ask KNC. With them bankrupt that will be difficult. According to your photos my bridges are not defective, as if they were, they would burn out the tracks, which have no happened. You can tell by looking at your photos. No burned copper. My bridges are fine.
Since you want to take it there. I'm not going to offer you a refund nor replace them, and now i'm also not going to help you. If you want help, find it somewhere else.
[/quote]
This is a sale and as a sale I have all the rights as a consumer. You clone their bridge and you distribute it if you didn't realize it.
It's your mistake that the bridges they don't work not mine, so give a solution.
I payed 0.4 btc for a working product.
[/quote]
You didn't purchase this product for money. You traded it for bitcoin which is not a currency. This isn't a sale, it's a trade if you want to get technical. The bridge is not a clone. It's literally the original with stronger tracks. I sent tested boards. If you blew them or your own Pi, that's no longer my problem. I would have helped you with a solution, but if you want to call me out for no reason, you're going to get no help PLUS nothing from me in return for being an ass. So deal with it now.
[/quote]
Am I being an ass or you ? You told me that ''I sound like someone who blew out the boards and are trying to get more. I will not lose more boards like that Sir.''
I told you that my controllers are working and mining with the original knc board and I am just switching with your bridge and nothing is working. Not even the raspberry pi with your bridge attached only it does not power up.
So:
-My miner does works with the original KNC bridge
-My miner does not work with your re-fabricated bridge
It's pretty obvious from the beginning that your bridges have a defect.
I am waiting a proper solution for that, I payed 0.4 btc for these two new re-fabricated bridges.
It's not a solution to keep my bitcoins and to let me with your defect products.
Still have not received anything in Florida.
Today, the package arrived in Florida. Of course, with traceable service, according to which it is posted at the same time as the other buyers packages.
Everyone does their own conclusions .. who lied, and for what reason.
Anyway, with a seller who writes his largest buyer of goods all this crap, I do not want to have anything to do in the future.
Well thank god you'll shutup about it now. Though don't assume you're the largest buyer of my "goods". I don't only sell those bridge boards. But it was hell dealing with you as a customer. So there's that.
'qberty' your clone titan bridges that you sent me do not work, they don't even let a new raspberry pi with titan firework in it to power up connected through usb.
Don't accuse people that they lie.
I spent 0.4 btc for two new heavy duty titan bridges and I got from you 2 non working.
Follow the laws and replace them or refund
Your China fabric that cloned mess it up, we will not pay for their mistake and your lies that were working.
I am want my money back or 2 bridges that are working.
Just so everyone can see. You're not getting a refund after all that shit you said in PM. You're not getting a replacement because according to the photo's, my boards are intact, the tracks haven't even blown. You don't want to check your Pi, or controller board, so that's your fault. I'm also not going to help you troubleshoot because you want to cause such a fuss. Also, for your information, you have no idea how these boards were fabricated and I can tell you they aren't chinese.
You're the second person to call me a liar aside from Tupsu. He was slammed to be completely wrong, and so will you. These boards aren't like complicated phones or master circuitry, the defective gray zone is too small, and becomes nonexistent when I test them before shipping it out. Yours was fully working. I'm not going to go through this with you like Tupsu. If you don't like it for some reason, don't buy my bridges. Good luck finding/getting them though. I'm the only one that makes them exactly like KNC's original.
Maybe if you talk to lightfoot, (he knows how it works) maybe he can get you something working, because I am not going to help you again.
Jump to: