Pages:
Author

Topic: Swedish ASIC miner company kncminer.com - page 37. (Read 3049521 times)

legendary
Activity: 2450
Merit: 1002
February 28, 2016, 01:54:23 PM
Question for ya all....

My Titan keeps causing my PSU's modular power connectors to eventually melt after like months and months of steady use. I think it may be because of crappy modular cable connectors n connections to the PSU.
The titan side of things - including the Y adapters remain in good shape.

So, Im wondering

Has anyone tried powering their Titans w/ one of these 2000w server PSU's using the breakout boards sold here on the forums to much success? Im just wondering if these breakout boards plus decent PCIe cables would be better for the Titan or not.
Looks like the controller board & pi would both have to still be powered by a seperate ATX psu to supply 5v ... is this ok to do?
Thanks

I used IBM 2880W w/ Finksy/J4bberwock board for months until I shipped the 2880W PSUs to a hosting place. I used J4bberwock 12V to 5V converter so ATX PSU wasn't needed. I now power each Titan with EVGA 1600W PSU, no issues for the last 2-3 months.

What was more effecient the server PSU or ATX PSU?

Also, do u know if the 12v -> 5v is still available for sale?
hero member
Activity: 895
Merit: 504
February 28, 2016, 01:08:01 PM
Question for ya all....

My Titan keeps causing my PSU's modular power connectors to eventually melt after like months and months of steady use. I think it may be because of crappy modular cable connectors n connections to the PSU.
The titan side of things - including the Y adapters remain in good shape.

So, Im wondering

Has anyone tried powering their Titans w/ one of these 2000w server PSU's using the breakout boards sold here on the forums to much success? Im just wondering if these breakout boards plus decent PCIe cables would be better for the Titan or not.
Looks like the controller board & pi would both have to still be powered by a seperate ATX psu to supply 5v ... is this ok to do?
Thanks

I used IBM 2880W w/ Finksy/J4bberwock board for months until I shipped the 2880W PSUs to a hosting place. I used J4bberwock 12V to 5V converter so ATX PSU wasn't needed. I now power each Titan with EVGA 1600W PSU, no issues for the last 2-3 months.
legendary
Activity: 2450
Merit: 1002
February 28, 2016, 12:57:07 PM
Question for ya all....

My Titan keeps causing my PSU's modular power connectors to eventually melt after like months and months of steady use. I think it may be because of crappy modular cable connectors n connections to the PSU.
The titan side of things - including the Y adapters remain in good shape.

So, Im wondering

Has anyone tried powering their Titans w/ one of these 2000w server PSU's using the breakout boards sold here on the forums to much success? Im just wondering if these breakout boards plus decent PCIe cables would be better for the Titan or not.
Looks like the controller board & pi would both have to still be powered by a seperate ATX psu to supply 5v ... is this ok to do?
Thanks
copper member
Activity: 2898
Merit: 1465
Clueless!
February 24, 2016, 12:31:19 AM
This next release ...... soon to become a reality!!!!!! woohoo =)
Final touches are in testing, hopefully no major bugs!


ah crap....as I sit here looking at the following parts

raspberry pi B+ 512mb

titan clone bridge (thanks qberty)

my knc Jupiter 550gh Nov 2013 4 port card with beagle bone still attached (must come off)

my Titan LCD gizmo from the 6 port Titan setup

the replacement (free) (new even) Corsair ax 1200i PSU from my 15 month RMA'd one that was 'fading' again
impressed with Corsair ..they could have refused warranty on 1) not ul listed equip and/or too exotic 2) normal
wear an tear on an titan ASIC 24/7 is not normal use....told them the truth even..they sent me new one w/o a
squeak)

my 1 die working Titan cube (30 ltc) I got to try NOT to blow up for this purpose

so heck if you get that new glen tarkin firmware out etc etc...I will then be 'compelled' to put this all
together and see if it works....(been stalling ...I'm a coward)

oh well.....at least I have the 'comfort' of ....if this works ...I will have brought forth .. a NEW evil KNC product
of the Titan variety...bruahahaha .... great we can MAYBE if this works 'spawn' new (I blame Qberty he was first
with the cloned titan board Smiley ) using Controller boards from
Jupiter/Saturn/Mercury/Neptune boards from day one to day last that were made to our 'evil' purposes

(digs out Voodoo for Dummies book....orders 5 gallon bucket of chicken entrails'  best to be prepared to 'appease'
the dark forces of this project I shall attempt Smiley


but again your firmware comes out I can no longer stall Sad

alas 'evil' never waits Smiley

pics shall be made available of

1) the fire damage/carnage etc (likely)

2) a working 'evil' newly hatched Titan Controller

sheesh I have to get out more Smiley



Lol!!! So.... Ive never quite figured this out, but why do you call me 'Glen Tarkin' ? LOL!

er oops....it would be nice if you could just change your name to that...less hassle in that I will likely 'finger flub' your
name in the future...just saying Smiley

legendary
Activity: 2450
Merit: 1002
February 23, 2016, 11:07:00 PM
This next release ...... soon to become a reality!!!!!! woohoo =)
Final touches are in testing, hopefully no major bugs!


ah crap....as I sit here looking at the following parts

raspberry pi B+ 512mb

titan clone bridge (thanks qberty)

my knc Jupiter 550gh Nov 2013 4 port card with beagle bone still attached (must come off)

my Titan LCD gizmo from the 6 port Titan setup

the replacement (free) (new even) Corsair ax 1200i PSU from my 15 month RMA'd one that was 'fading' again
impressed with Corsair ..they could have refused warranty on 1) not ul listed equip and/or too exotic 2) normal
wear an tear on an titan ASIC 24/7 is not normal use....told them the truth even..they sent me new one w/o a
squeak)

my 1 die working Titan cube (30 ltc) I got to try NOT to blow up for this purpose

so heck if you get that new glen tarkin firmware out etc etc...I will then be 'compelled' to put this all
together and see if it works....(been stalling ...I'm a coward)

oh well.....at least I have the 'comfort' of ....if this works ...I will have brought forth .. a NEW evil KNC product
of the Titan variety...bruahahaha .... great we can MAYBE if this works 'spawn' new (I blame Qberty he was first
with the cloned titan board Smiley ) using Controller boards from
Jupiter/Saturn/Mercury/Neptune boards from day one to day last that were made to our 'evil' purposes

(digs out Voodoo for Dummies book....orders 5 gallon bucket of chicken entrails'  best to be prepared to 'appease'
the dark forces of this project I shall attempt Smiley


but again your firmware comes out I can no longer stall Sad

alas 'evil' never waits Smiley

pics shall be made available of

1) the fire damage/carnage etc (likely)

2) a working 'evil' newly hatched Titan Controller

sheesh I have to get out more Smiley



Lol!!! So.... Ive never quite figured this out, but why do you call me 'Glen Tarkin' ? LOL!
copper member
Activity: 2898
Merit: 1465
Clueless!
February 23, 2016, 10:20:28 PM
This next release ...... soon to become a reality!!!!!! woohoo =)
Final touches are in testing, hopefully no major bugs!


ah crap....as I sit here looking at the following parts

raspberry pi B+ 512mb

titan clone bridge (thanks qberty)

my knc Jupiter 550gh Nov 2013 4 port card with beagle bone still attached (must come off)

my Titan LCD gizmo from the 6 port Titan setup

the replacement (free) (new even) Corsair ax 1200i PSU from my 15 month RMA'd one that was 'fading' again
impressed with Corsair ..they could have refused warranty on 1) not ul listed equip and/or too exotic 2) normal
wear an tear on an titan ASIC 24/7 is not normal use....told them the truth even..they sent me new one w/o a
squeak)

my 1 die working Titan cube (30 ltc) I got to try NOT to blow up for this purpose

so heck if you get that new glen tarkin firmware out etc etc...I will then be 'compelled' to put this all
together and see if it works....(been stalling ...I'm a coward)

oh well.....at least I have the 'comfort' of ....if this works ...I will have brought forth .. a NEW evil KNC product
of the Titan variety...bruahahaha .... great we can MAYBE if this works 'spawn' new (I blame Qberty he was first
with the cloned titan board Smiley ) using Controller boards from
Jupiter/Saturn/Mercury/Neptune boards from day one to day last that were made to our 'evil' purposes

(digs out Voodoo for Dummies book....orders 5 gallon bucket of chicken entrails'  best to be prepared to 'appease'
the dark forces of this project I shall attempt Smiley


but again your firmware comes out I can no longer stall Sad

alas 'evil' never waits Smiley

pics shall be made available of

1) the fire damage/carnage etc (likely)

2) a working 'evil' newly hatched Titan Controller

sheesh I have to get out more Smiley






full member
Activity: 121
Merit: 100
February 23, 2016, 10:06:14 PM
Hey Everybody,

I sold the last of my cubes, but if one of you super geniuses needs a Titan Controller board to mess with, I have one for sale here...

https://litecointalk.org/index.php?topic=29018


--Matt
legendary
Activity: 2450
Merit: 1002
February 23, 2016, 11:51:43 AM
This next release ...... soon to become a reality!!!!!! woohoo =)
Final touches are in testing, hopefully no major bugs!
copper member
Activity: 2898
Merit: 1465
Clueless!
February 23, 2016, 05:38:32 AM
And on a non-related note, I just figured out how to fix a Titan cube with 2 dead dies to hash at full speed.

It's Miller time!



Lightfoot

Lightfoot

Not sure it is worth it to try. Cost and otherwise to send you this cube.



BUT have a KNC 'supposedly' 'unrepairable' 2 dies' titan cube. When kNC got swamp'd with RMA's they gave folk a 'choice' of taking 2 1/2 working cubes
to replace one fully NOT working RMA cube sent in. OR you could wait as they 'nicely' put it 4-6 weeks MAYBE get a new fully working cube.

(really got to hand it to these guys..just typing this they can still piss me off) Sad

anyway it is DOWN to one working die at 325mh. If you want the challenge and it don't cost too much. I can send it to you for bragging rights. Bet you could fix it Smiley

bet they did not even try back at that point of time on the 'swamp of' RMA returned cubes them first couple of months....back in the day of 2014.

Say a RMA  Cube with 2 working dies comes in for replacement likely went right out the door in
the above 2 for one deal on a different RMA ..bingo bango.....(ah...KNC evil sure works)

anyway just thought you'd get a hoot out of this Smiley



I have a cube with 2 bad dies also, got it on ebay so I knew in advance -- but would be fun to get em working


yep that's the one I'm talking about Smiley Then again all knc stuff is 'evil' thus they will try to make a 'break for it' and get lost in the mail ...effectively bricking themselves in the 'mail'
as a doorstop on some poor unsuspecting persons stoop......

again evil they are..Smiley

legendary
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
February 22, 2016, 01:35:42 PM
CRAP! Short summary, may be unstable after powering down and up. There may be a reason they disabled the dies. That's why testing includes powering everything down for 4 hours then a restart and retest before shipping :-)

Ug. Crap crap crap crap crap.
sr. member
Activity: 342
Merit: 250
February 22, 2016, 12:08:37 PM
And on a non-related note, I just figured out how to fix a Titan cube with 2 dead dies to hash at full speed.

It's Miller time!



Lightfoot

Lightfoot

Not sure it is worth it to try. Cost and otherwise to send you this cube.



BUT have a KNC 'supposedly' 'unrepairable' 2 dies' titan cube. When kNC got swamp'd with RMA's they gave folk a 'choice' of taking 2 1/2 working cubes
to replace one fully NOT working RMA cube sent in. OR you could wait as they 'nicely' put it 4-6 weeks MAYBE get a new fully working cube.

(really got to hand it to these guys..just typing this they can still piss me off) Sad

anyway it is DOWN to one working die at 325mh. If you want the challenge and it don't cost too much. I can send it to you for bragging rights. Bet you could fix it Smiley

bet they did not even try back at that point of time on the 'swamp of' RMA returned cubes them first couple of months....back in the day of 2014.

Say a RMA  Cube with 2 working dies comes in for replacement likely went right out the door in
the above 2 for one deal on a different RMA ..bingo bango.....(ah...KNC evil sure works)

anyway just thought you'd get a hoot out of this Smiley



I have a cube with 2 bad dies also, got it on ebay so I knew in advance -- but would be fun to get em working
copper member
Activity: 2898
Merit: 1465
Clueless!
February 22, 2016, 01:04:47 AM
And on a non-related note, I just figured out how to fix a Titan cube with 2 dead dies to hash at full speed.

It's Miller time!



Lightfoot

Lightfoot

Not sure it is worth it to try. Cost and otherwise to send you this cube.



BUT have a KNC 'supposedly' 'unrepairable' 2 dies' titan cube. When kNC got swamp'd with RMA's they gave folk a 'choice' of taking 2 1/2 working cubes
to replace one fully NOT working RMA cube sent in. OR you could wait as they 'nicely' put it 4-6 weeks MAYBE get a new fully working cube.

(really got to hand it to these guys..just typing this they can still piss me off) Sad

anyway it is DOWN to one working die at 325mh. If you want the challenge and it don't cost too much. I can send it to you for bragging rights. Bet you could fix it Smiley

bet they did not even try back at that point of time on the 'swamp of' RMA returned cubes them first couple of months....back in the day of 2014.

Say a RMA  Cube with 2 working dies comes in for replacement likely went right out the door in
the above 2 for one deal on a different RMA ..bingo bango.....(ah...KNC evil sure works)

anyway just thought you'd get a hoot out of this Smiley

sr. member
Activity: 342
Merit: 250
February 21, 2016, 10:59:22 PM
And on a non-related note, I just figured out how to fix a Titan cube with 2 dead dies to hash at full speed.

It's Miller time!



Lightfoot

congrats, what was wrong with it?
legendary
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
February 21, 2016, 09:27:37 PM
And on a non-related note, I just figured out how to fix a Titan cube with 2 dead dies to hash at full speed.

It's Miller time!



Lightfoot
hero member
Activity: 744
Merit: 514
gotta let a coin be a coin
February 21, 2016, 09:09:29 AM
perhaps it would be more fitting if they were human centipede-d into a circle so they might spend eternity swallowing nothing but each others' shit... perhaps
+1 to that. Looks like their dream isn't working out.
legendary
Activity: 2450
Merit: 1002
February 20, 2016, 02:23:34 PM
Since Im inching closer to release every day and hopefully its right around the corner. Figured I would post a preview picture of the ADVANCED page. Shows the updated "Energy Saver" options, also note the blue progress banner at the top ... this banner will be on every major webgui page while "Energy Saver" is in progress. That banner will turn green when tuning is complete and awaiting user input (Selecting to keep the tuned settings or revert to pretuned settings" ... once selected it will do what the user selects then "Energy Saver" will be turned off and user selection applied.
The HELP page which you can see linked there, will provided a form of Q&A for users regarding "Energy Saver" and how it works.

Went looking for the code today to see how you are satisfying GPL licensing requirements but don't see anything in the repo aside from a README, how are you making the source available these days?

Well, there is no GPL licensed code in my installation file, so I dont have to make the source available for my mod if I dont want to. All of the code in my installation file is licensed under MIT which is KNC's license of choosing for their overall project. Furthermore, my changes to KNC's original code is sublicensed under my own modified BSD license w/ nonfree restrictions.
Ive trimmed out all the files I dont use. The upgrade installation file shrank significantly from 20MB or so, down to 3.2MB.
legendary
Activity: 1428
Merit: 1000
https://www.bitworks.io
February 20, 2016, 09:31:06 AM
Since Im inching closer to release every day and hopefully its right around the corner. Figured I would post a preview picture of the ADVANCED page. Shows the updated "Energy Saver" options, also note the blue progress banner at the top ... this banner will be on every major webgui page while "Energy Saver" is in progress. That banner will turn green when tuning is complete and awaiting user input (Selecting to keep the tuned settings or revert to pretuned settings" ... once selected it will do what the user selects then "Energy Saver" will be turned off and user selection applied.
The HELP page which you can see linked there, will provided a form of Q&A for users regarding "Energy Saver" and how it works.

Went looking for the code today to see how you are satisfying GPL licensing requirements but don't see anything in the repo aside from a README, how are you making the source available these days?
legendary
Activity: 2450
Merit: 1002
February 19, 2016, 10:29:54 PM
Since Im inching closer to release every day and hopefully its right around the corner. Figured I would post a preview picture of the ADVANCED page. Shows the updated "Energy Saver" options, also note the blue progress banner at the top ... this banner will be on every major webgui page while "Energy Saver" is in progress. That banner will turn green when tuning is complete and awaiting user input (Selecting to keep the tuned settings or revert to pretuned settings" ... once selected it will do what the user selects then "Energy Saver" will be turned off and user selection applied.
The HELP page which you can see linked there, will provided a form of Q&A for users regarding "Energy Saver" and how it works.
legendary
Activity: 1848
Merit: 1001
February 19, 2016, 09:39:27 PM
perhaps it would be more fitting if they were human centipede-d into a circle so they might spend eternity swallowing nothing but each others' shit... perhaps
legendary
Activity: 1904
Merit: 1007
February 19, 2016, 05:37:20 PM
But it's not enough! I want this to be a reality asap


Your updates on the process of suing these crooks welcome here  Smiley

If BFL got away with their whole bullshit and with a boss who was already convicted well I think that Markus and Sam will be just fine. Sadly!
Pages:
Jump to: