Pages:
Author

Topic: Swedish ASIC miner company kncminer.com - page 41. (Read 3049521 times)

full member
Activity: 121
Merit: 100
February 02, 2016, 12:42:32 AM


Also, what Titan owners could possibly have made back 2x -3x ROI?  The early Titans hardly even worked!


Do the math using -365 days, -515 days, this is just from LTC mining, imagine mining other coins. Hardly even worked ---- 1st batch Titans hashes over 240 MH or more even with 1 dead dies in each cube (total 4 dead dies).

https://bitcoinwisdom.com/litecoin/calculator

Yeah, but that's assuming the software was any good.  My Titan had to be manually restarted every hour or so for the first few firmware revisions.  Then there were the RMAs which took 4-6 weeks each.  I'm not even close to 1x ROI on my rig.
legendary
Activity: 2450
Merit: 1002
February 02, 2016, 12:23:29 AM
Im sorry, I know you guys want this drama to quit ... hopefully it will but I just have to state something really quick. Something I realized today and find quite ironic.

Knowing that hes sending out emails to all customers and trying to push them to buy his fake version ... I find this situation funny. Hes NEVER put this much effort into selling my firmware, when we were partners he put little effort into marketing, at one point called it tedious and hated doing it, he made attempts to at first but never delivered on some things I requested of him .. in marketing realm.
>>> Fast forward to now , a month after he abandons the project... hes working harder than ever at marketing against me. Hes marketing broken code that could very well break peoples hardware. Ramming sales attempts down peoples throats ... all to just make a quick and shitty buck.


Vegasguy is working harder at stealing from me then he ever worked at marketing for me.

Also, ironic given this whole situation ... he always told me while we were partners: "I could care less about the money" ... obviously a blantant lie now proven.
You would rather steal from me, break peoples hardware and put so much effort into doing so.
If your a fucking millionaire ... why the fuck are you doing this to me and peoples machines?!

Its the principle. What you did to me was disgraceful, im still in disbelief. I worked with you EVERY DAY on this. I talked to you multiple times a day about this project, then when you decide you dont need me anymore you setup a secret website and then demand the clients info. Its ALL principle. People think your some kind of saint, and I did too. Maybe this is my fault. When I met you, you were never greedy , and were giving this software away for free. Now Ive shown you how much you can make and how, you now value money and greed over everything else. So maybe it is my fault for showing you whats possible. You were NEVER like this. I told you how hurt I was by you. I told you I was devistated. It was true. You never once asked why. Because you KNEW the reason. Im telling you how hurt I am that you have backstabbed me, and then you ask for the client emails!?!?!? What does THAT say about you??  Look at the chat log.  Ive never so betrayed by anyone in my entire life. I was nothing but good to you 100%, and for you to setup a secret website and then ask for the client emails, so you can keep all the profits, you should be ashamed of your self and embarrassed.

If it was you telling the story it would read like this:

Vegas left me, and is selling unfinished software. That is so far from the truth it isnt even funny.

The real truth: Ive been selling this software for months. The one that we worked on together EVERY SINGLE DAY. Everything was fine until you setup that secret website, then you wanted to drop me as soon as possible, but wait you need the client data , so you came and asked me for it.  Who is the scumbag now? THAT is what really happened. So suck it up, you stabbed ME in the back, and now you want to blame ME?!?!?! ARE YOU SERIOUS!!! You need to check your morals and ethics, you have changed a lot and NOT for the better.

The software has been running on my miners for weeks and flawless, its legally forked and is mine. You wanted me out of the picture to keep 100% of the profits, well , now you can, so what are you complaining about?

If this so called software you were giving me to test damages hardware, did you even ONCE warn me? Did you care? NO. If you say different prove it. You were having my expensive mining cubes test your software that damages hardware according to you, and never warned me even once. YOU NEVER tested it on YOUR hardware. Now suddenly it breaks hardware, thats the first time youve EVER said those words. Your something else. People WILL find out the real you, the mask you wear will fall off, give it time.

Vegas

Now Gentarkin there is a way for me to remove all traces of my forked software and its this:

Admit on this thread, that you planned in secret to end our business relationship so you could keep all the profits. Admit you setup that secret website for the sole purpose of getting rid of me and setting up your own site, so you can keep all the profits and not as a "backup". Admit that we spoke MULTIPLE times every day, and I was a major part of this project and a major influence. Admit that I was 100% true to you and never wronged you when we were working together.

Do these things and be sincere and I will end the Ebay sales, and close the portion of my site selling the titan software.

Thats what this has been about the whole time. I feel back stabbed and betrayed, and I wanted you to feel just a portion of my pain.

Vegas
OK OK OK, I will admit to one thing and one thing only, because its the ONLY THING youve said that rings anywhere NEAR the truth. That is, that a one point we were speaking nearly daily.
For the rest of what you ask, I will not admit. I cant admit to something I didnt do.

Sure, I set up a secret website ... reasons have ALREADY been talked about several times and even several times I mention in the FULL CHAT LOGS posted.
What matters, and what it comes down to.... no matter how much you feel "betrayed or backstabbed" ... I did nothing of the sort. I OFFERED YOU RELEVANT ACCESS TO MY NEW SITE. I OFFERED THE SAME PROFIT SPLITTING. I OFFERED EVERY POWER YOU ALREADY HAD ... except that on my site, those powers would be SHARED with me. (Tell me, how is that betrayal or backstabbing?!) YOU EAGERLY DECLINED AND VANISHED! Taking off with what should have been shared from the beginning - the customer db. I have a right to know who my customers are. This is my project for crying out loud! I should know anything I want to about it!

Even if I did admit to your false accusations, sure ... you may remove ur ebay ad & firmware page on ur site .... then you would have ur laugh and bring it right back up. When u left, according to the chat logs you said u would leave and shut everything down ... OH LOOK YOU HAVENT! ... you are really a man of your word!

And you know, another thing I have to correct about your initial post on the last page. You keep saying & thinking I never implemented any of your ideas, you said that like 3 or 4 times in that post alone. You need to get your facts straight ... I implemented a decent number of them while we were working together, I even listed them out and you agreed at one point. But to this day you accuse me of being so closed minded and never implementing anything you suggested.

Honestly, someone who comes into a project and has a "true helping heart" - doesnt become so obsessed about the sales - that when asked to share that control & responsibility over sales - doesnt just run off and start stealing everything my brain has been working hard at for like over half a year.

Your version of that "true helping heart" is ... become part of a project - offer "help" - gain control of sales - doesnt share anything when asked(sale responsbility & customer data) - abandons project when no longer can control original project - starts stealing out of pure spite.

Lastly, theres no way you have a fork of my code. You never had access to my private repo. All you *may* have is a new repo you created based off my code.
oh and ... LOL! ... dude
Quote
"If this so called software you were giving me to test damages hardware, did you even ONCE warn me? Did you care? NO. If you say different prove it. You were having my expensive mining cubes test your software that damages hardware according to you, and never warned me even once. YOU NEVER tested it on YOUR hardware. Now suddenly it breaks hardware, thats the first time youve EVER said those words."
- The warning about risk to hardware is on the freaking webgui ... has been since day one.

But in all seriousness, as with any code... a lot of bug squishing(what I did w/ you for months) is finding out why something took an unexpected turn and take action to correct it.... well guess what, many of those moments have crept up since your version of the test code. Hence why it can be a higher risk to run on hardware.
On a more serious note ...
Quote
"YOU NEVER tested it on YOUR hardware"
is completely and absolutely 100% FALSE  -- as with the rest of your lies.

Seriously ... go to your flycoin and other of your many coins youve made tens of thousands on.   Leave my pennies to me!
Just leave in peace.
sr. member
Activity: 405
Merit: 250
February 01, 2016, 11:41:20 PM
If you guys could confirm a sale of at least 50 bridge boards, I can bulk produce it pretty quick for cheaper than I was selling them for.
sr. member
Activity: 342
Merit: 250
February 01, 2016, 11:24:10 PM
hey GenTarkinWannabeGuy the only thing you added to the project was the video that you shamelessly promoted and never delivered on, so where's the video ??


Steve , you know nothing about nothing. All you have is hateful words. Trust me , if your as close to Gentarkin as you claim to be, its only a matter of time before he sells you out too.

I was the guy that brought this project to new heights , Genatarkin couldnt even dream of, and he sold me out for greed. What do you think he will do to you , that has no purpose other than being an obnoxious loudmouth?

Vegas

rofl, and you're a pompous bloviating fool -- did I claim to be close?

I am beta testing the software, volunteering for no monetary gain, how can he sell me out??  there is only one sellout here and it's you
sr. member
Activity: 342
Merit: 250
February 01, 2016, 11:15:45 PM
Now Gentarkin there is a way for me to remove all traces of my forked software and its this:

Admit on this thread, that you planned in secret to end our business relationship so you could keep all the profits. Admit you setup that secret website for the sole purpose of getting rid of me and setting up your own site, so you can keep all the profits and not as a "backup". Admit that we spoke MULTIPLE times every day, and I was a major part of this project and a major influence. Admit that I was 100% true to you and never wronged you when we were working together.

Do these things and be sincere and I will end the Ebay sales, and close the portion of my site selling the titan software.

Thats what this has been about the whole time. I feel back stabbed and betrayed, and I wanted you to feel just a portion of my pain.

Vegas

admit that you lied about the video which you obviously had no intention of delivering
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
February 01, 2016, 11:06:23 PM
hey GenTarkinWannabeGuy the only thing you added to the project was the video that you shamelessly promoted and never delivered on, so where's the video ??


Steve , you know nothing about nothing. All you have is hateful words. Trust me , if your as close to Gentarkin as you claim to be, its only a matter of time before he sells you out too.

I was the guy that brought this project to new heights , Genatarkin couldnt even dream of, and he sold me out for greed. What do you think he will do to you , that has no purpose other than being an obnoxious loudmouth?

Vegas
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
February 01, 2016, 11:03:48 PM
Now Gentarkin there is a way for me to remove all traces of my forked software and its this:

Admit on this thread, that you planned in secret to end our business relationship so you could keep all the profits. Admit you setup that secret website for the sole purpose of getting rid of me and setting up your own site, so you can keep all the profits and not as a "backup". Admit that we spoke MULTIPLE times every day, and I was a major part of this project and a major influence. Admit that I was 100% true to you and never wronged you when we were working together.

Do these things and be sincere and I will end the Ebay sales, and close the portion of my site selling the titan software.

Thats what this has been about the whole time. I feel back stabbed and betrayed, and I wanted you to feel just a portion of my pain.

Vegas
sr. member
Activity: 342
Merit: 250
February 01, 2016, 10:55:11 PM
 hey GenTarkinWannabeGuy the only thing you added to the project was the video that you shamelessly promoted and never delivered on, so where's the video ??



legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
February 01, 2016, 10:21:45 PM
Im sorry, I know you guys want this drama to quit ... hopefully it will but I just have to state something really quick. Something I realized today and find quite ironic.

Knowing that hes sending out emails to all customers and trying to push them to buy his fake version ... I find this situation funny. Hes NEVER put this much effort into selling my firmware, when we were partners he put little effort into marketing, at one point called it tedious and hated doing it, he made attempts to at first but never delivered on some things I requested of him .. in marketing realm.
>>> Fast forward to now , a month after he abandons the project... hes working harder than ever at marketing against me. Hes marketing broken code that could very well break peoples hardware. Ramming sales attempts down peoples throats ... all to just make a quick and shitty buck.


Vegasguy is working harder at stealing from me then he ever worked at marketing for me.

Also, ironic given this whole situation ... he always told me while we were partners: "I could care less about the money" ... obviously a blantant lie now proven.
You would rather steal from me, break peoples hardware and put so much effort into doing so.
If your a fucking millionaire ... why the fuck are you doing this to me and peoples machines?!

Its the principle. What you did to me was disgraceful, im still in disbelief. I worked with you EVERY DAY on this. I talked to you multiple times a day about this project, then when you decide you dont need me anymore you setup a secret website and then demand the clients info. Its ALL principle. People think your some kind of saint, and I did too. Maybe this is my fault. When I met you, you were never greedy , and were giving this software away for free. Now Ive shown you how much you can make and how, you now value money and greed over everything else. So maybe it is my fault for showing you whats possible. You were NEVER like this. I told you how hurt I was by you. I told you I was devistated. It was true. You never once asked why. Because you KNEW the reason. Im telling you how hurt I am that you have backstabbed me, and then you ask for the client emails!?!?!? What does THAT say about you??  Look at the chat log.  Ive never so betrayed by anyone in my entire life. I was nothing but good to you 100%, and for you to setup a secret website and then ask for the client emails, so you can keep all the profits, you should be ashamed of your self and embarrassed.

If it was you telling the story it would read like this:

Vegas left me, and is selling unfinished software. That is so far from the truth it isnt even funny.

The real truth: Ive been selling this software for months. The one that we worked on together EVERY SINGLE DAY. Everything was fine until you setup that secret website, then you wanted to drop me as soon as possible, but wait you need the client data , so you came and asked me for it.  Who is the scumbag now? THAT is what really happened. So suck it up, you stabbed ME in the back, and now you want to blame ME?!?!?! ARE YOU SERIOUS!!! You need to check your morals and ethics, you have changed a lot and NOT for the better.

The software has been running on my miners for weeks and flawless, its legally forked and is mine. You wanted me out of the picture to keep 100% of the profits, well , now you can, so what are you complaining about?

If this so called software you were giving me to test damages hardware, did you even ONCE warn me? Did you care? NO. If you say different prove it. You were having my expensive mining cubes test your software that damages hardware according to you, and never warned me even once. YOU NEVER tested it on YOUR hardware. Now suddenly it breaks hardware, thats the first time youve EVER said those words. Your something else. People WILL find out the real you, the mask you wear will fall off, give it time.

Vegas
hero member
Activity: 895
Merit: 504
February 01, 2016, 09:47:37 PM


Also, what Titan owners could possibly have made back 2x -3x ROI?  The early Titans hardly even worked!


Do the math using -365 days, -515 days, this is just from LTC mining, imagine mining other coins. Hardly even worked ---- 1st batch Titans hashes over 240 MH or more even with 1 dead dies in each cube (total 4 dead dies).

https://bitcoinwisdom.com/litecoin/calculator
full member
Activity: 121
Merit: 100
February 01, 2016, 08:33:01 PM

If you're a fucking millionaire ... why the fuck are you doing this to me and peoples machines?!


Because he's not a fucking millionaire.  One look at his posts on this forum should tell you that.  One look at his Ebay sales record (aside from your software) should tell you that.  Real money has better things to do than pressure people into nickel & dime scams.

IN OTHER NEWS, perhaps you and Lightfoot could work together on a Beaglebone Black port which would eliminate the stupid bridge board?

Also, what Titan owners could possibly have made back 2x -3x ROI?  The early Titans hardly even worked!



legendary
Activity: 2450
Merit: 1002
February 01, 2016, 07:37:02 PM
Im sorry, I know you guys want this drama to quit ... hopefully it will but I just have to state something really quick. Something I realized today and find quite ironic.

Knowing that hes sending out emails to all customers and trying to push them to buy his fake version ... I find this situation funny. Hes NEVER put this much effort into selling my firmware, when we were partners he put little effort into marketing, at one point called it tedious and hated doing it, he made attempts to at first but never delivered on some things I requested of him .. in marketing realm.
>>> Fast forward to now , a month after he abandons the project... hes working harder than ever at marketing against me. Hes marketing broken code that could very well break peoples hardware. Ramming sales attempts down peoples throats ... all to just make a quick and shitty buck.


Vegasguy is working harder at stealing from me then he ever worked at marketing for me.

Also, ironic given this whole situation ... he always told me while we were partners: "I could care less about the money" ... obviously a blantant lie now proven.
You would rather steal from me, break peoples hardware and put so much effort into doing so.
If your a fucking millionaire ... why the fuck are you doing this to me and peoples machines?!
legendary
Activity: 3164
Merit: 2258
I fix broken miners. And make holes in teeth :-)
February 01, 2016, 05:16:55 PM
How are people justifying the expense in this?  It sounds like we're back to being GPU hobbyists again, except this time with an even greater lack of understanding of what we're working with.  Not that there's anything wrong with that. 

But just for reference; Spending $100 USD on aftermarket fans will set your ROI back about 30 days.  Are people really considering water cooling?
It's fun?

I water cooled a Neptune on a lark, it actually works very well. I have thought about pulling a bunch of little heat sinks off some other things and making a mongo cooler, maybe I'll do that over the weekend. But water cooling a bank of Titans should work.

However to be honest that tower heat sink is not bad...


And now I'm really confused.  Is the bridgeboard a completely passive device?  You mean we could just build a cable to replace it entirely?
Amazing! One just showed up in the repair queue and I can look at it.

It's pretty much passive. Some LEDs tied most likely to GPIO ports, that's nice but not necessary and one shiny capacitor on there, probably for the 5 volt supply.  Yeah you could probably rig something together but those bridge boards are a much more elegant way to go.

The real rock and roll solution is to port the code to the beaglebone. So far I have the FPGA loading the titan firmware, powering up, and I think the stuff for the web site just needs a quick java fix. Annoying that the stock BB freaks out on reboot and overwrites all my hacks, I'll have to disable that.

hero member
Activity: 895
Merit: 504
February 01, 2016, 02:40:03 PM

You can buy replacement heatsink holddown parts directly from coolermaster....

If it fits an Intel 1155 socket heatsink pattern it will fit.
It uses a 75mm x 75mm square hole pattern.
Other PC heatsink manufacturers have similar replacement items.
There are also many flavors of waterblock mounting hardware that could be pressed into service.
The hole pattern is an industry standard.


How are people justifying the expense in this?  It sounds like we're back to being GPU hobbyists again, except this time with an even greater lack of understanding of what we're working with.  Not that there's anything wrong with that. 

But just for reference; Spending $100 USD on aftermarket fans will set your ROI back about 30 days.  Are people really considering water cooling?


Most people (original Titan owners) made 2x-3x or more of their initial investment, so it is pure profit to run them now. Unless someone bought an expensive secondhand Titan recently, then ROI is at least 12 months w/o any added expense.
full member
Activity: 121
Merit: 100
February 01, 2016, 12:17:16 PM

You can buy replacement heatsink holddown parts directly from coolermaster....

If it fits an Intel 1155 socket heatsink pattern it will fit.
It uses a 75mm x 75mm square hole pattern.
Other PC heatsink manufacturers have similar replacement items.
There are also many flavors of waterblock mounting hardware that could be pressed into service.
The hole pattern is an industry standard.


How are people justifying the expense in this?  It sounds like we're back to being GPU hobbyists again, except this time with an even greater lack of understanding of what we're working with.  Not that there's anything wrong with that. 

But just for reference; Spending $100 USD on aftermarket fans will set your ROI back about 30 days.  Are people really considering water cooling?




If the 'bridgeboard' is only made with traces and connectors(no extra parts on the PCB),
then you can construct a ratsnest with the following...


And now I'm really confused.  Is the bridgeboard a completely passive device?  You mean we could just build a cable to replace it entirely?
sr. member
Activity: 386
Merit: 250
February 01, 2016, 09:02:02 AM
Below is my post on lightfoots fixing and moding the Jupiter/Neptune/Titan thread (link below)


here is my 'sacrifice of a titan clone board'  idea....." likely to be shot down by lightfoot (and pics of KNC Oct Jupiter 550gh 4 port Beagle Bone Black Card) that I propose to attempt to mod
to a Titan 4 port board ..using the 'cloned titan bridge (1 of 10) sold on here recently.....for those interested below is the link

have a cube that I really NOW have to play with a Titan Cube and repaste/add fan/do the cut down main heatsink and small heatsink mods) that is slowly dying
2 dies slip sliding into oblivion...a tweak at a time every 2 weeks or so...currently at 200 and 250 ....

so hell may as well 'wreck' as much stuff as possible before these Titan's turn into doorstops......Fast an Furious ASIC version lol ) Smiley

here is the link to the pics/info and hopefully lightfoot will reply..those with the same old KNC OCT Jupiter/Saturn/Mercury 4 or 6 port boards you may still
have laying about..may want to see if anything like this is 'possible' or 'could work'

https://bitcointalksearch.org/topic/m.13740028


my own view (and some others here) is that KNC went as 'cheap ass as possible" and that ANY 4/6 port board from the 1st knc 2013 board to the last
WILL WORK with the cloned Titan or other Titan Bridges...in fact .my view further is (no proof..just guessing) is that you could get the proper 1 pin raspberry pi
sized pin cables (as others on here more tech savvy then me have proposed) and not need a titan clone bridge daughter board AT ALL just spaghetti the works
...if someone was to just map such out on both boards...again guessing ..but hey look at the firmware shortcuts they took with that and Glen Tarkin's major improvements
...it just plain imho could be that simple (or I could see a cloned titan bridge melt ...like the wicked witch of the east.....)

anyway enjoy...this ugly duckling will either become a Swan or Roast Duck imho Smiley

As a side note.how many folk have old Jupiter/Saturn/Mercury/Neptune boards on hand that they could use in this manner (assuming do'able ..big assumption)








You can buy replacement heatsink holddown parts directly from coolermaster.
The screw sizes may be different(a tight fit thru the holes in ASIC PCB) but new smaller screws are inexpensive.
I drilled the holes larger.
IF YOU DRILL, RUN A VACUUME CLEANER(ASIC side) WHILE DRILLING!!!

If it fits an Intel 1155 socket heatsink pattern it will fit.
It uses a 75mm x 75mm square hole pattern.
Other PC heatsink manufacturers have similar replacement items.
There are also many flavors of waterblock mounting hardware that could be pressed into service.
The hole pattern is an industry standard.

This way you could save the original plate in case you change your mind.

If you look on this page you can see the parts in question. (4th pic down)
They sell seperately a kit that has most of the hardware in the pic.
http://www.amazon.com/Cooler-Master-Hyper-212-RR-212E-20PK-R2/dp/B005O65JXI

----------

If the 'bridgeboard' is only made with traces and connectors(no extra parts on the PCB),
then you can construct a ratsnest with the following.
http://www.amazon.com/gp/product/B00BQA5BWU?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
(the linked product is overkill but the price is right and the extra flavors are handy)


Smiley
YMMV
copper member
Activity: 2898
Merit: 1465
Clueless!
February 01, 2016, 03:35:14 AM
Below is my post on lightfoots fixing and moding the Jupiter/Neptune/Titan thread (link below)


here is my 'sacrifice of a titan clone board'  idea....." likely to be shot down by lightfoot (and pics of KNC Oct Jupiter 550gh 4 port Beagle Bone Black Card) that I propose to attempt to mod
to a Titan 4 port board ..using the 'cloned titan bridge (1 of 10) sold on here recently.....for those interested below is the link

have a cube that I really NOW have to play with a Titan Cube and repaste/add fan/do the cut down main heatsink and small heatsink mods) that is slowly dying
2 dies slip sliding into oblivion...a tweak at a time every 2 weeks or so...currently at 200 and 250 ....

so hell may as well 'wreck' as much stuff as possible before these Titan's turn into doorstops......Fast an Furious ASIC version lol ) Smiley

here is the link to the pics/info and hopefully lightfoot will reply..those with the same old KNC OCT Jupiter/Saturn/Mercury 4 or 6 port boards you may still
have laying about..may want to see if anything like this is 'possible' or 'could work'

https://bitcointalksearch.org/topic/m.13740028


my own view (and some others here) is that KNC went as 'cheap ass as possible" and that ANY 4/6 port board from the 1st knc 2013 board to the last
WILL WORK with the cloned Titan or other Titan Bridges...in fact .my view further is (no proof..just guessing) is that you could get the proper 1 pin raspberry pi
sized pin cables (as others on here more tech savvy then me have proposed) and not need a titan clone bridge daughter board AT ALL just spaghetti the works
...if someone was to just map such out on both boards...again guessing ..but hey look at the firmware shortcuts they took with that and Glen Tarkin's major improvements
...it just plain imho could be that simple (or I could see a cloned titan bridge melt ...like the wicked witch of the east.....)

anyway enjoy...this ugly duckling will either become a Swan or Roast Duck imho Smiley

As a side note.how many folk have old Jupiter/Saturn/Mercury/Neptune boards on hand that they could use in this manner (assuming do'able ..big assumption)





copper member
Activity: 2898
Merit: 1465
Clueless!
February 01, 2016, 02:13:34 AM
Why

Not

Ask

From knc

To have

New version

Of Titan firmware???

many people have...no replies ...including glen tarkin also ....they don't care anymore and have not since they stopped firmware support feb 2015 fyi

and shut all of knc down......and off to icelandic data halls they went....the swedish consumer part of the business relasted to us was shut down jan 2015

just a couple guys doing RMA for folk under the 1 year warranty....and they probably will be gone soon as well

hell about 6 months ago I sent emails just to see if they would reply on an RMA question.....4 emails w/in the month NO replies

they don't / won't talk about anything ..my view due to the 'class action' they were told to clam up and do zip tech wise imho

by the by i should probably google or find out what ever happened with that class action against knc (i had no balls to toss 1.5k in the kitty and be liable
according to the law firm probably no more then 5k if knc won....so chickened out)

off to google it...wonder what happened if anything yet

but naw....you can email them all you want ...but an email to Satoshi would have the same result (zilch) but be 'more satisfying' imho



I emailed them once a month or 2 back asking question bout the closed sourceness of their firmware for the Titan controller.... they actually got back to me =P LOL




Heh....KNC  just liked tellying you NO! (just my view)  (I hope some 'former' or other knc tech there is following your firmware progress....put them in their place.....knc even went 'cheap' on their techs and guys with firmware development ..look at github 2 guys...you make 200 million in 2014 an you have 1 guy (kurt quit dec 2014) and the other guy that did a tweak or two
till feb 2015..after kurt hit the road..thats it.....customer were chumps imho before the units even left the gate Smiley

well I'm surprised they 'replied' probably trying to 'discourage your efforts' which IF THEY ARE AWARE ..probably causes them 'amateur coder shame in hindsight' lol Smiley

heh 'knc replied' who'd a thunk it Smiley

by the way email them again ask if you can get a copy of forums for the community......that will likely get NO reply..but hey...you have more 'legit' authority to ask

for tech info then most in that you are moving the 'firmware' along....worth a  shot (don't tell them about the ip page still being up thou lol ) Smiley

the link was

http://forum.kncminer.com/

it likely won't amount to anything but at least you can say 'you were an adult' and tried...if they 'childishly' don't reply Smiley

the forums 'were' public so they have no real excuse imho but the one of 'not really giving a damn'

you get a reply and a way to get that and you will be 'tipped' by many on here ....that is for sure..

anyway appreciate your efforts on our behalf

NOTE:

And anyone on here to my previously posted question IS IT POSSIBLE to take the 18 or whatever wayback  machine archive backups of the old knc miner archive snapshots (with forums hopefully available also in some manner) and MERGE them for some kind of 'kinda sorta' working (incomplete but merged) mirror of such?

just saying it may or may not amount to much...but I'd like to think you could with some program/manner merge them all get rid of duplicate inks and viola say 3/4 of the forums accessible in some mirror'd manner for our use?

just saying ..might be up to doing that as a side project if i had a 'newbie' plug an play way/program to do such with the archives downloaded in whatever manner this would work

(i currently use WinHTTrrack to get them 'individually by date" a side program to merge stuff would be great!)





newbie
Activity: 31
Merit: 0
January 31, 2016, 06:31:54 PM
Hi vegasguy! Grin How are you?

i still waiting you get back to me about the release of the repair video...since when i pm you at christmas Wink

maybe the 125 $ donation i made by paypal on august last year for both you and gentarkin work was not enough?

So please stop to post here you have lost all credibility....It seems you're a business man!

You could maybe learn to be fair by giving the half of 125$ you took me for ....nothing to gentarkin which make a really good job !
sr. member
Activity: 342
Merit: 250
January 31, 2016, 06:09:24 PM
GenTarkin doesn't need to defend himself from VegasGuy.  
The only truth to the matter is that GenTarkin had no business sense because he got involved with VegasLiar in the first place.  
Now it seems he's grown some business sense and fired his "sales manager" or whatever VegasPsycho supposedly was.  

I paid GenTarkin directly for his firmware back in September of 2015 because I wanted nothing to do with VegasTool.

It is also a fact that GenTarkin has consistently delivered.

VegasNutcase reminds me of that 2 bit hustler on Gomer Pyle. He'd stand on the street corner peddling stolen watches to passersby, had a dozen or so  up his sleeve, kinda sad and pathetic

I paid tarkin directly too, never sent any money to VegasScrewball ... but still kinda curious "where's the video"?
Pages:
Jump to: