Swedish ASIC miner company kncminer.com - page 739.

soy

legendary

Activity: 1428

Merit: 1013

Quote from: Searing on January 14, 2014, 01:10:26 AM

Quote from: r1senfa17h on January 13, 2014, 09:06:47 PM

Quote from: jelin1984 on January 13, 2014, 07:30:15 PM

Me too much better with 0.99.1 than 0.99.2

I haven't seen a difference in speed between 0.99.1 & 0.99.2 It just added features and security.

I myself have some kinda "genie" in my Jupiter box.....I hashed at 555gh when it was at...the first software (what was it .90 or some such?)

it hashed at 555gh at .95

it hashes at 555gh at .99 (before tuning version)

it hashes at 555gh with the cover off and two fans on it and the temp in the basement was 51F (the Midwest deep freeze of 2 wks)

it hashes at 555gh today with the temp at 60F

its friggin processed is what it is.....

now Phonex1969 has a different genie (or did) his only worked well when the temp went up (Hawaii)

anyway go figure...me I'm probably just gonna leave the dang thing alone there is something "comforting" about just letting the thing hash a month or more (just don't bump the table..them isobar circuit breaker 8plugs are pretty slick)

now just have to make a voodoo doll against lightning or I will have phoenix1969s fate

Searing

Luck? Suppose that lightening had struck before he sold his gear?

ImI

legendary

Activity: 1946

Merit: 1019

Quote from: Tigggger on January 14, 2014, 10:04:22 AM

Quote from: RoadStress on January 14, 2014, 10:01:07 AM

Is the forum broken? Direct links to post don't seem to work for me. They just go to a specific page, but not to the specific post. Anyone else having this problem?

The latest update to AdBlock causes this symptom, also breaks the 'new' links, if you use it just disable on this site

thx!

Tigggger

legendary

Activity: 1098

Merit: 1000

Quote from: RoadStress on January 14, 2014, 10:01:07 AM

Is the forum broken? Direct links to post don't seem to work for me. They just go to a specific page, but not to the specific post. Anyone else having this problem?

The latest update to AdBlock causes this symptom, also breaks the 'new' links, if you use it just disable on this site

wasubii

sr. member

Activity: 448

Merit: 250

Quote from: opentoe on January 14, 2014, 08:28:51 AM

Pretty soon our upgraded Saturn's aren't going to matter with the project I have going on, but they feel like our first baby and we still have to take care of them.

Both of our upgraded Saturn's use to hash rock steady at 560Gh/sec. We have even upgraded our power supplies so each module is on it's own line. Then slowly no matter which firmware we used the hash rate would just very slowly drop and never increase again. Both of our Saturn's are doing this and they are hooked up hashing 100 miles apart from one another. Could it be that the hardware is starting to fail? We never had to mess around with their tuning kit. Apparently their hardware isn't as good as I thought it was if only after 3-4 months starts to behave negatively. I tested the power supplies, made sure all our connections are good. The only thing left is the hardware itself. Very strange our hashing speed would just decrease from 560 all the way to 520 with no intervention at all.

Just checking, but have you tried using a different pool?

RoadStress

legendary

Activity: 1904

Merit: 1007

Quote from: Tigggger on January 14, 2014, 09:49:01 AM

Quote from: opentoe on January 14, 2014, 09:32:46 AM

Is there any documentation for using the "tune" firmware? Before you start to blow up your rig? How many volts? Frequency, anything like that? Did KNC release anything on that or just threw it at us and said good luck?

This is a great thread for tweaking the jupiters

https://bitcointalksearch.org/topic/hacking-the-knc-firmware-overclocking-313978

For my October 8VRM Jupiter I went from 557GH -> 625GH

Changes to the cgminer.sh file in this post.

https://bitcointalksearch.org/topic/m.4367865

Regarding the tune I used Cyper's post as a guide, tweaking voltages to get them around 50A / 40W in the advanced screen

https://bitcointalksearch.org/topic/m.4413599

Is the forum broken? Direct links to post don't seem to work for me. They just go to a specific page, but not to the specific post. Anyone else having this problem?

Tigggger

legendary

Activity: 1098

Merit: 1000

Quote from: opentoe on January 14, 2014, 09:32:46 AM

Is there any documentation for using the "tune" firmware? Before you start to blow up your rig? How many volts? Frequency, anything like that? Did KNC release anything on that or just threw it at us and said good luck?

This is a great thread for tweaking the jupiters

https://bitcointalksearch.org/topic/hacking-the-knc-firmware-overclocking-313978

For my October 8VRM Jupiter I went from 557GH -> 625GH

Changes to the cgminer.sh file in this post.

https://bitcointalksearch.org/topic/m.4367865

Regarding the tune I used Cyper's post as a guide, tweaking voltages to get them around 50A / 40W in the advanced screen

https://bitcointalksearch.org/topic/m.4413599

lenny_

legendary

Activity: 1036

Merit: 1000

DARKNETMARKETS.COM

Quote from: opentoe on January 14, 2014, 09:32:46 AM

I never keep the web stats page up at all. I barely ever use it and when I did finally use it just to checking something noticed how slow things were going.

Is there any documentation for using the "tune" firmware? Before you start to blow up your rig? How many volts? Frequency, anything like that? Did KNC release anything on that or just threw it at us and said good luck?

Advanced tuning is only usable if your miner is not healthy (dead dies, disabled cores etc.), or you overclocking your machine. I am running 630 GH/s right now with my Oct Jupiter.

opentoe

legendary

Activity: 1274

Merit: 1000

Personal text my ass....

I never keep the web stats page up at all. I barely ever use it and when I did finally use it just to checking something noticed how slow things were going.

Is there any documentation for using the "tune" firmware? Before you start to blow up your rig? How many volts? Frequency, anything like that? Did KNC release anything on that or just threw it at us and said good luck?

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: opentoe on January 14, 2014, 08:28:51 AM

Pretty soon our upgraded Saturn's aren't going to matter with the project I have going on, but they feel like our first baby and we still have to take care of them.

Both of our upgraded Saturn's use to hash rock steady at 560Gh/sec. We have even upgraded our power supplies so each module is on it's own line. Then slowly no matter which firmware we used the hash rate would just very slowly drop and never increase again. Both of our Saturn's are doing this and they are hooked up hashing 100 miles apart from one another. Could it be that the hardware is starting to fail? We never had to mess around with their tuning kit. Apparently their hardware isn't as good as I thought it was if only after 3-4 months starts to behave negatively. I tested the power supplies, made sure all our connections are good. The only thing left is the hardware itself. Very strange our hashing speed would just decrease from 560 all the way to 520 with no intervention at all.

that happens to me IF i keep the web page stat thing up on the browser to your machine via the ip....the knc web interface...now i don't use that i just power up the machine and see if all is well with putty and ssh...i also am running 99 not tuneup version

since i did that this slow drain does not happen over time...also i am on dedicated elec 20amp to the miner and dedicated ip to the miner nothing else on any of that

anyway ....all i have for all it is worth

Searing

opentoe

legendary

Activity: 1274

Merit: 1000

Personal text my ass....

Pretty soon our upgraded Saturn's aren't going to matter with the project I have going on, but they feel like our first baby and we still have to take care of them.

Both of our upgraded Saturn's use to hash rock steady at 560Gh/sec. We have even upgraded our power supplies so each module is on it's own line. Then slowly no matter which firmware we used the hash rate would just very slowly drop and never increase again. Both of our Saturn's are doing this and they are hooked up hashing 100 miles apart from one another. Could it be that the hardware is starting to fail? We never had to mess around with their tuning kit. Apparently their hardware isn't as good as I thought it was if only after 3-4 months starts to behave negatively. I tested the power supplies, made sure all our connections are good. The only thing left is the hardware itself. Very strange our hashing speed would just decrease from 560 all the way to 520 with no intervention at all.

wasubii

sr. member

Activity: 448

Merit: 250

Quote from: je1p7u7 on January 14, 2014, 02:46:51 AM

Quote from: xstr8guy on January 14, 2014, 01:24:56 AM

I think a lot (not all) of the tinkering people were doing were just guys that can't help but fiddle with everything electronic or mechanical, lol. Remember the "ionizer guy"? Wink

The ionizer topic was very entertaining! Maybe if we all start approving it we can start a religion? And maybe sell a few "miner overclock kits" to some BFL customers? ;P

Poor kids - haven't they suffered enough? Grin

je1p7u7

newbie

Activity: 52

Merit: 0

Quote from: xstr8guy on January 14, 2014, 01:24:56 AM

I think a lot (not all) of the tinkering people were doing were just guys that can't help but fiddle with everything electronic or mechanical, lol. Remember the "ionizer guy"? Wink

The ionizer topic was very entertaining! Maybe if we all start approving it we can start a religion? And maybe sell a few "miner overclock kits" to some BFL customers? ;P

AussiePete

member

Activity: 72

Merit: 10

Phoneix , If I really have to have a monkey at the steering wheel , I think I would rather have you driving than most the other Pecker woods ............. As far as monkeys go ... youv'e got hairy ugly thing down pat Grin

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Yeah, I did get a chuckle out of that ionizer guy Grin

But admittedly ... I'm a master at fiddling with stuff... lol
It's in my DNA

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: Searing on January 14, 2014, 01:10:26 AM

Quote from: r1senfa17h on January 13, 2014, 09:06:47 PM

Quote from: jelin1984 on January 13, 2014, 07:30:15 PM

Me too much better with 0.99.1 than 0.99.2

I haven't seen a difference in speed between 0.99.1 & 0.99.2 It just added features and security.

I myself have some kinda "genie" in my Jupiter box.....I hashed at 555gh when it was at...the first software (what was it .90 or some such?)

it hashed at 555gh at .95

it hashes at 555gh at .99 (before tuning version)

it hashes at 555gh with the cover off and two fans on it and the temp in the basement was 51F (the Midwest deep freeze of 2 wks)

it hashes at 555gh today with the temp at 60F

its friggin processed is what it is.....

now Phonex1969 has a different genie (or did) his only worked well when the temp went up (Hawaii)

anyway go figure...me I'm probably just gonna leave the dang thing alone there is something "comforting" about just letting the thing hash a month or more (just don't bump the table..them isobar circuit breaker 8plugs are pretty slick)

now just have to make a voodoo doll against lightning or I will have phoenix1969s fate

Searing

Mine doesn't vary either. It doesn't matter what temperature or firmware version it is.

I think a lot (not all) of the tinkering people were doing were just guys that can't help but fiddle with everything electronic or mechanical, lol. Remember the "ionizer guy"? Wink

Biomech

legendary

Activity: 1372

Merit: 1022

Anarchy is not chaos.

Quote from: Searing on January 14, 2014, 01:10:26 AM

Quote from: r1senfa17h on January 13, 2014, 09:06:47 PM

Quote from: jelin1984 on January 13, 2014, 07:30:15 PM

Me too much better with 0.99.1 than 0.99.2

I haven't seen a difference in speed between 0.99.1 & 0.99.2 It just added features and security.

I myself have some kinda "genie" in my Jupiter box.....I hashed at 555gh when it was at...the first software (what was it .90 or some such?)

it hashed at 555gh at .95

it hashes at 555gh at .99 (before tuning version)

it hashes at 555gh with the cover off and two fans on it and the temp in the basement was 51F (the Midwest deep freeze of 2 wks)

it hashes at 555gh today with the temp at 60F

its friggin processed is what it is.....

now Phonex1969 has a different genie (or did) his only worked well when the temp went up (Hawaii)

anyway go figure...me I'm probably just gonna leave the dang thing alone there is something "comforting" about just letting the thing hash a month or more (just don't bump the table..them isobar circuit breaker 8plugs are pretty slick)

now just have to make a voodoo doll against lightning or I will have phoenix1969s fate

Searing

Personally, I'd go for a lightning rod. Voodoo dolls are better for messing with your enemies Cheesy

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: r1senfa17h on January 13, 2014, 09:06:47 PM

Quote from: jelin1984 on January 13, 2014, 07:30:15 PM

Me too much better with 0.99.1 than 0.99.2

I haven't seen a difference in speed between 0.99.1 & 0.99.2 It just added features and security.

I myself have some kinda "genie" in my Jupiter box.....I hashed at 555gh when it was at...the first software (what was it .90 or some such?)

it hashed at 555gh at .95

it hashes at 555gh at .99 (before tuning version)

it hashes at 555gh with the cover off and two fans on it and the temp in the basement was 51F (the Midwest deep freeze of 2 wks)

it hashes at 555gh today with the temp at 60F

its friggin processed is what it is.....

now Phonex1969 has a different genie (or did) his only worked well when the temp went up (Hawaii)

anyway go figure...me I'm probably just gonna leave the dang thing alone there is something "comforting" about just letting the thing hash a month or more (just don't bump the table..them isobar circuit breaker 8plugs are pretty slick)

now just have to make a voodoo doll against lightning or I will have phoenix1969s fate

Searing

Shameless Beggar

newbie

Activity: 26

Merit: 0

When btc gets to 100k, with some btc earned with my Saturn, should I pick Icon A5 or Volocopter?

rolling

hero member

Activity: 824

Merit: 712

Quote from: opentoe on January 13, 2014, 09:29:32 PM

I'm definitalely going to change back to maybe .98 or something. Ever since I got into the .99 I've been hashing a lot slower.

My Dad's miner also has a small issue. On one of his OUTPUT CURRENT value's it is very low. Is there a reason why this is? Here is a screen shot of it.

Disabled cores is my bet, give it more voltage.

opentoe

legendary

Activity: 1274

Merit: 1000

Personal text my ass....

I'm definitalely going to change back to maybe .98 or something. Ever since I got into the .99 I've been hashing a lot slower.

My Dad's miner also has a small issue. On one of his OUTPUT CURRENT value's it is very low. Is there a reason why this is? Here is a screen shot of it.

Topic: Swedish ASIC miner company kncminer.com - page 739. (Read 3050074 times)