Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: T9+ Miner Status (Read 234 times)

SJSMiner
newbie
Activity: 18
Merit: 0
T9+ Miner Status
December 24, 2018, 08:20:45 AM
#9
thanks! - i have my QNAP's set to static will do same on miners.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T9+ Miner Status
December 23, 2018, 04:26:01 AM
#8
you will be amazed with the little to no info bitmain support has  Grin .  bitmain will only suggest a reset and a reboot or sending the miner back to china to have it fixed. for years i had to tackle my own problems and received 0 help from their support. so i wouldn't count on them.

but honestly this this is a network that you have to fix by yourself. there is plenty of room of asus tri-band , is it 3200? i doubt you can fully utilize the dhcp table, there is well over 200 IPs to be given, but your default setting might be limiting the DCHP table to a certain number of ips.

also i wouldn't rely on dhcp , for my small farm i use DHCP setting on the miner but i force the router the to give each miner a static IP based on mac address, so even if i flush a new fw or reset the miner the ip it's going to take is always the same. after applying these settings i have not had a single problem network related since then.

SJSMiner
newbie
Activity: 18
Merit: 0
Re: T9+ Miner Status
December 22, 2018, 07:45:38 AM
#7
agree networking issue.  using DHCP.  Plenty of addresses using Asus tri-band router.  I have two working T9+ right now and will try to get the 3rd working once I find a suitable outlet.  I have asked bitmain for insights regarding network issues / bmminer restart but none yet.

sjs
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T9+ Miner Status
December 22, 2018, 01:05:03 AM
#6
This looks like a pool or connection/network problem , i am 99% sure.

based on the fact that you can only get 1 working miner at the time, then I am willing to bet the horse that this is a network problem.
i guess if you turn of the currently working miner, turn on the original miner, it will work.

this could be the cause of these 2 following:

1- you are using a static IP which is similar on all ASICs, so once you restart the router, the router works based on first come first serve, whoever make the hand shake, get's the IP , the other one sit there and cry all night.

2-your DHCP client has a limited IPs to give, maybe you have other devices along with the single working miner that is fully utilizing all the IPs on your dhcp table.

*so if you do turn the working miner off, then turn your router off and on again, wait 2 mins, turn the original one on and it works. then we know your problem is router related, and i will tell you how to fix it in.

if my theory is wrong , then try this

try these in order, 1 at the time , reboot after every trial and you need to allow 10 mins at least after each reboot

1-copy paste the pool info from the working T9, make sure you copy it exactly , confirm you have no trailing spaces

2-change the network setting on the miner, if it's DHCP , give it a static IP address, copy the DNS and other info from the working T9, everything must be kept the same except for the last part of the IP needs to be something different, for example if the working IP is showing
192.168.1.40
the ip on the non working miner should be 192.168.1.45 or 192.168.1.30 or 192.168.1.67

3- back up the firmware from the working miner,put it in the non working miner, if it has static IP, make sure you turn off the working miner , then restart the non working miner

report back , if i take too long to respond , feed free to shot me a pm.
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: T9+ Miner Status
December 21, 2018, 12:26:08 PM
#5
I don't see any problem except for this

Code:
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!

Try flashing the miner to the latest firmware you can get the firmware from http://service.bitmain.com/ and then test it again.

If you still having issue with the same problem the only way that I know to fix this issue is to flash the hashboard with working hex file.

Check this link repair a T9 + after a bad firmware (lost chain).
SJSMiner
newbie
Activity: 18
Merit: 0
Re: T9+ Miner Status
December 21, 2018, 06:49:43 AM
#4
Kernel log from miner just restarted that has never mined.

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000308] ps7-ttc #0 at df804000, irq=43
[    0.000615] Console: colour dummy device 80x30
[    0.000647] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040209] pid_max: default: 32768 minimum: 301
[    0.040430] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040450] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042610] CPU: Testing write buffer coherency: ok
[    0.042942] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043002] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043222] L310 cache controller enabled
[    0.043242] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121036] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210380] SMP: Total of 2 processors activated.
[    0.210388] CPU: All CPU(s) started in SVC mode.
[    0.211049] devtmpfs: initialized
[    0.213466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214671] regulator-dummy: no parameters
[    0.222325] NET: Registered protocol family 16
[    0.224609] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226896] cpuidle: using governor ladder
[    0.226909] cpuidle: using governor menu
[    0.234300] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235817] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235831] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235942] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257660] bio: create slab  at 0
[    0.259069] vgaarb: loaded
[    0.259781] SCSI subsystem initialized
[    0.260754] usbcore: registered new interface driver usbfs
[    0.260928] usbcore: registered new interface driver hub
[    0.261793] usbcore: registered new device driver usb
[    0.262334] media: Linux media interface: v0.10
[    0.262492] Linux video capture interface: v2.00
[    0.262729] pps_core: LinuxPPS API ver. 1 registered
[    0.262741] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262864] PTP clock support registered
[    0.263223] EDAC MC: Ver: 3.0.0
[    0.264265] Advanced Linux Sound Architecture Driver Initialized.
[    0.267088] DMA-API: preallocated 4096 debug entries
[    0.267102] DMA-API: debugging enabled by kernel config
[    0.267174] Switched to clocksource arm_global_timer
[    0.287401] NET: Registered protocol family 2
[    0.288064] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288122] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288207] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288252] TCP: reno registered
[    0.288269] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288304] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288536] NET: Registered protocol family 1
[    0.288879] RPC: Registered named UNIX socket transport module.
[    0.288892] RPC: Registered udp transport module.
[    0.288901] RPC: Registered tcp transport module.
[    0.288909] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288922] PCI: CLS 0 bytes, default 64
[    0.289353] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291364] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293454] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293657] msgmni has been set to 967
[    0.294434] io scheduler noop registered
[    0.294447] io scheduler deadline registered
[    0.294491] io scheduler cfq registered (default)
[    0.305306] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305327] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427603] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.995302] console [ttyPS0] enabled
[    0.999566] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.007161] [drm] Initialized drm 1.1.0 20060810
[    1.024215] brd: module loaded
[    1.033636] loop: module loaded
[    1.043026] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.048837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.056581] libphy: XEMACPS mii bus: probed
[    1.061260] ------------- phy_id = 0x3625e62
[    1.066002] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.074900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.081732] ehci-pci: EHCI PCI platform driver
[    1.088959] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.095750] usbcore: registered new interface driver usb-storage
[    1.102635] mousedev: PS/2 mouse device common for all mice
[    1.108759] i2c /dev entries driver
[    1.115622] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.121135] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.127006] Xilinx Zynq CpuIdle Driver started
[    1.131886] sdhci: Secure Digital Host Controller Interface driver
[    1.138073] sdhci: Copyright(c) Pierre Ossman
[    1.142341] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.149162] mmc0: no vqmmc regulator found
[    1.153177] mmc0: no vmmc regulator found
[    1.197195] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205923] usbcore: registered new interface driver usbhid
[    1.211432] usbhid: USB HID core driver
[    1.216135] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222434] nand: Micron MT29F2G08ABAEAWP
[    1.226401] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232346] Bad block table found at page 131008, version 0x01
[    1.238568] Bad block table found at page 130944, version 0x01
[    1.244622] 3 ofpart partitions found on MTD device pl353-nand
[    1.250399] Creating 3 MTD partitions on "pl353-nand":
[    1.255492] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263549] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270864] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279792] TCP: cubic registered
[    1.283030] NET: Registered protocol family 17
[    1.287743] Registering SWP/SWPB emulation handler
[    1.293626] regulator-dummy: disabling
[    1.297972] UBI: attaching mtd1 to ubi0
[    1.824045] UBI: scanning is finished
[    1.835644] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842725] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849487] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856151] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863030] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869010] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876117] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 862493722
[    1.885073] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894289] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.894295] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898260] ALSA device list:
[    1.898263]   No soundcards found.
[    1.914632] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.943793] UBIFS: recovery needed
[    2.041835] UBIFS: recovery completed
[    2.045502] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.051480] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.060556] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.070443] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.075472] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[    2.086769] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.093505] devtmpfs: mounted
[    2.096616] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.931569] random: dd urandom read with 0 bits of entropy available
[    3.327188] 
[    3.327188] bcm54xx_config_init
[    3.937220] 
[    3.937220] bcm54xx_config_init
[    7.938038] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.944146] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.568241] In axi fpga driver!
[   22.571310] request_mem_region OK!
[   22.574700] AXI fpga dev virtual address is 0xdf9fc000
[   22.579841] *base_vir_addr = 0xc510
[   22.594706] In fpga mem driver!
[   22.598015] request_mem_region OK!
[   22.601521] fpga mem virtual address is 0xe2000000
[   23.407196] 
[   23.407196] bcm54xx_config_init
[   24.037198] 
[   24.037198] bcm54xx_config_init
[   28.038050] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.044152] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  450.099725] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 814ced2815408814
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
Chain[11] ASIC[13] has core num=1
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=11 on chain[1], value=870
get PIC voltage=11 on chain[2], value=870
get PIC voltage=11 on chain[3], value=870
get PIC voltage=11 on chain[8], value=870
get PIC voltage=11 on chain[9], value=870
get PIC voltage=11 on chain[10], value=870
get PIC voltage=11 on chain[11], value=870
get PIC voltage=11 on chain[12], value=870
get PIC voltage=11 on chain[13], value=870
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,0,0,0,0,0,35,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
chain[10] temp offset record: 1,0,0,0,0,0,35,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
chain[12] temp offset record: 1,0,0,0,0,0,35,28
chain[12] temp chip I2C addr=0x98
chain[12] has no middle temp, use special fix mode.
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1401 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=20854 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 7870 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=27364 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=14439 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 814ced2815408814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4920
get fan[2] speed=4920
get fan[2] speed=5880
get fan[5] speed=5880
get fan[2] speed=5880
get fan[5] speed=5880
get fan[2] speed=5880
get fan[5] speed=5880
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J12] has core num in PIC
Chain[J12] ASIC[13] has core num=1
miner total rate=7078GH/s fixed rate=7000GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575


Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:1 max freq=575
Chain:1 min freq=575

read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:2 max freq=575
Chain:2 min freq=575

read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:8 max freq=575
Chain:8 min freq=575

read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:9 max freq=575
Chain:9 min freq=575

read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:10 max freq=575
Chain:10 min freq=575

read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575 
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575 
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575 
Asic[17]:575 
Chain:11 max freq=575
Chain:11 min freq=575

max freq = 575
set baud=1
Chain[J9] PIC temp offset=1,0,0,0,0,0,35,28
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J9] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[0] local:37 remote:41 offset:27 
Chain[J9] chip[0] get middle temp offset=27 typeID=55
Chain[J11] PIC temp offset=1,0,0,0,0,0,35,28
chain[10] temp chip I2C addr=0x98
chain[10] has no middle temp, use special fix mode.
Chain[J11] chip[0] use PIC middle temp offset=0 typeID=55
New offset Chain[10] chip[0] local:34 remote:38 offset:27 
Chain[J11] chip[0] get middle temp offset=27 typeID=55
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=643 total_tv_end_sys=644
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 

get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 

get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 

get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 

get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 

get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 
Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=55 middle offset=27
Chain[8] Chip[1] local Temp=47
Chain[8] Chip[1] middle Temp=63
Special fix Chain[8] Chip[1] middle Temp = 62
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=55 middle offset=27
Chain[10] Chip[1] local Temp=44
Chain[10] Chip[1] middle Temp=61
Special fix Chain[10] Chip[1] middle Temp = 59
Done read temp on Chain[10]
set FAN speed according to: temp_highest=47 temp_top1[PWM_T]=47 temp_top1[TEMP_POS_LOCAL]=47 temp_change=47 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 44
read_temp_func Done!
CRC error counter=0

UPDATE:     rebooted router.  now one of the other T9+ started to work.  can't get the original working T9+ to start mining again.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: T9+ Miner Status
December 20, 2018, 08:02:22 PM
#3
This is strange, i did a little research for you and found this > https://bitcointalksearch.org/topic/antminer-t9-problem-i-beg-you-to-help-fixed-and-fixed-firmware-url-probl-2899438

while appeantly you don't seem to have the wrong firmware but it could still possibly be a firmware issue. so try to flash another firmware also make sure it is the correct firmware. be aware that T9 and T9+ firmware are different.
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: T9+ Miner Status
December 20, 2018, 06:32:26 PM
#2
Do you have stable ping or internet?
Have you check the hasboard temp from the status dashboard?
Have you tried to upgrade your firmware to the latest version? If not do this first and check if it works.

If you can do a screenshot with your miner status post it here.

Also can you post the complete kernel logs here or in pastebin so that we can find the problem easily.
SJSMiner
newbie
Activity: 18
Merit: 0
Re: T9+ Miner Status
December 20, 2018, 09:09:49 AM
#1
Hello - I have (3) T9+ all running the same configuration.  

Code:
Kernel Version	Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version	Fri Nov 24 23:19:16 EST 2017
Logic Version	T9+-nopreheat

One of the units suddenly started working at 4am today.  I was connecting to all 3 pools.  I changed the pools around and then it suddenly stopped working.  Any advice would be appreciated.  

Code:
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 80504d2815408814
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90

UPDATE:   One T9+ is working 10.6 GH/s.    Other two have yet to show any miner status.

UPDATE2:   The one working T9+ stopped working after 12 hours after I switched the pools.  Not sure how long it will take to restart.

UPDATE3:   Relocated miners.  Rebooted router again.  Now I have 2 T9+ working.   Any ideas what a reboot of the router is doing?

sjs
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: