Topic: tdxminer lyra2z/XZC Miner for AMD GPUs on Linux - page 28. (Read 44574 times)

The dev pool failing to connect is my fault.  There was an error that took out the dev pool for a few hours, it is back up now.  You may occasionally see these errors from time to time as I need to restart it to push updates, but I do my best to keep the down time to only a few seconds.

I don't have much else to suggest for stability.  Just make sure your temps are good, and if you're not overclocking/undervolting the cards should be stable.

Thanks Tod. I have been setting fan speed to 50 with ohgodatool and clocks with "sudo /opt/rocm/bin/rocm-smi --setsclk 0 1 2 3 4" to reduce power consumption. Any other tips to have stability?

Also today, I am getting "Dev pool failed to connect."

This is most likely due to the card crashing.  This can happen due to unstable overclocks and/or underclocks.  This can also happen if the GPU goes over temp.  I suggest monitoring the GPU's power state and temperature.  With the ROCm drivers installed, I find the rocm-smi tool to be the easiest way to do this.


Sorry crocozino, but I'm not actively working on the Windows version right now.  All the time I've been able to put into the miner have go to fixing bugs lately.  I will not be able to get a windows version out any time soon.  I suggest trying one of the many linux mining distros and reading/following one of the many linux mining guides out there.

hi! is there any news about windows version of your super fast miner?
is there any progress on that? I'm really interested in it, and I'm sure not only me have such a live interest))
please, can you post and update about it?

Sometimes a GPU will crash but mining with other GPUs will continue.  2 x Vegas with v2.2.1. Not sure why this happens. Need to shutdown system to fix this.

[2018-03-29 20:12:37] Stats GPU 0 - lyra2z: 5.279Mh/s (5.275Mh/s)  
[2018-03-29 20:12:37] Stats GPU 1 - lyra2z: 6.101Mh/s (6.096Mh/s)  
[2018-03-29 20:12:37] Stats Total - lyra2z: 11.380Mh/s (11.371Mh/s)  
[2018-03-29 20:12:41] Pool us-east.lyra2z-hub.miningpoolhub.com received new job. (job_id: a47a)
[2018-03-29 20:12:51] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:13:15] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:13:34] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:13:36] Pool us-east.lyra2z-hub.miningpoolhub.com received new job. (job_id: a47b)
[2018-03-29 20:13:37] Stats GPU 0 - lyra2z: 5.286Mh/s (5.275Mh/s)  
[2018-03-29 20:13:37] Stats GPU 1 - lyra2z: 3.932Mh/s (6.082Mh/s)  
[2018-03-29 20:13:37] Stats Total - lyra2z: 9.218Mh/s (11.356Mh/s)  
[2018-03-29 20:13:53] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:14:02] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:14:31] Pool us-east.lyra2z-hub.miningpoolhub.com received new job. (job_id: a47c)
[2018-03-29 20:14:37] Stats GPU 0 - lyra2z: 5.286Mh/s (5.275Mh/s)  
[2018-03-29 20:14:37] Stats GPU 1 - lyra2z: 0.000Mh/s (6.042Mh/s)  
[2018-03-29 20:14:37] Stats Total - lyra2z: 5.286Mh/s (11.317Mh/s)  
[2018-03-29 20:14:56] Pool us-east.lyra2z-hub.miningpoolhub.com share accepted.
[2018-03-29 20:15:26] Pool us-east.lyra2z-hub.miningpoolhub.com received new job. (job_id: a47d)

hi bro, if you dont make one more server you will lose some customers, because i havent found a way to bypass russia goverment block (even using vpn) because your pool connects through ssl (suspected). i think that if you take 3% fee you should provide nice service

this is a bad solution .. so many users will look for a crawl ..

Ugh, government IP blocking is such bs.

Sorry fellas.
I will not be setting up additional dev servers at this time.
You'll either have to run with the reduced hash rate, or find a way to get around the IP block.

Can you elaborate on what you mean by not available?  Does DNS fail to resolve the domain?  Is the route blocked by your ISP?

No, this domain is not available from Russia. Please fix

What do you get if you try to ping dev.tdxminer.com?  Maybe run a traceroute too.

This port is open.I calmly go to sites https.
[2018-03-28 11:35:17] Pool europe.lyra2z-hub.miningpoolhub.com share accepted.    
[2018-03-28 11:35:21] Pool europe.lyra2z-hub.miningpoolhub.com received new job. (j
ob_id: 6d5)                                                                        
[2018-03-28 11:35:26] Pool europe.lyra2z-hub.miningpoolhub.com share accepted.    
[2018-03-28 11:35:46] Dev pool failed to connect.                                  
[2018-03-28 11:35:56] Stats GPU 0 - lyra2z: 3.284Mh/s (3.280Mh/s)                  
[2018-03-28 11:35:56] Stats GPU 1 - lyra2z: 3.080Mh/s (3.082Mh/s)                  
[2018-03-28 11:35:56] Stats GPU 2 - lyra2z: 3.279Mh/s (3.280Mh/s)                  
[2018-03-28 11:35:56] Stats Total - lyra2z: 9.643Mh/s (9.641Mh/s)
Because of this, my hash on the pool is less? Russia. tried with different providers. What is the dev domain?
Help

The message you are seeing is because the miner cannot connect to the dev pool.
The miner connects to the dev pool via port 443.  Please check that your firewall allows this port.  (This is usually the https port for connecting to websites with encryption)

Not connected or dev pool.
Mining will proceed at reduced rate while not connected to dev pool.                                                                  
what is the problem?
v0.2.2.1
TODXX HELP ME!!

will you release the windows version of this miner ?
we hope you do. 

I know its OT, but can you guys tell me if you are able to OC under linux? I am having no luck OCing, core speed is set by system and i can not override that. I am using

echo "5" > /sys/class/drm/card0/device/pp_sclk_od
which changes nothing, according to amd-info
also
echo manual > /sys/class/drm/card0/device/power_dpm_force_performance_level
echo 7 > /sys/class/drm/card0/device/pp_dpm_sclk
does not change dpm state, actually i can change it to lower but never to highest value (7).

I can change memory clock with
echo "5" > /sys/class/drm/card0/device/pp_mclk_od
but no luck with core clock

I am using hiveOS, as root.

You can monitor temps via "watch sensors"

how to to properly setup fans i have no idea.

Please does anyone know if there is any tool to monitor temp and or modify fanspeed and power limit?

thanks a lot

Marco

Anyone know how to adjust power level / TDP for Vega cards in linux? For fan speed, ohgodatool seems to work.

thanks TDX for help one VEGA running - 6-5 mhs, now need to try another mainboards.

& how can i get fans into 100% ?