Hello, sp_!
Tell me pls why does the miner not work with miningpoolhub?
https://i.ibb.co/VgZmK5R/2021-11-02-17-06-27.png
did i do something wrong?
Flight sheet was formed on hiveOS
Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 64. (Read 35053 times)
November 02, 2021, 01:28:08 PM
November 02, 2021, 01:23:27 PM
The default intensity (-1) dynamic works best on other pools because you can get stale shares on etheremine.
--xintensity 60 works good on the rx 580
--xintensity 78 works good on the 6800xt
SO perhaps something in between?
For no stale shares use something like --xintensity 24 (flexpool, crazypool, nicehash)
xintensity -1 is good on miningpoolhub, nanopool, f2pool and 2miners.
November 02, 2021, 01:15:22 PM
RX6700XT Sapphire Nitro+
HiveOS 0.6-211@211031
Driver A20.40 (5.11.0701)
Pool - ethermine
Hi community, please tell me who has settings for TBM/Ethermine?
Now I use:
-b
-E -1
https://i.ibb.co/6b6rkDG/2021-11-02-20-13-32.png
HiveOS 0.6-211@211031
Driver A20.40 (5.11.0701)
Pool - ethermine
Hi community, please tell me who has settings for TBM/Ethermine?
Now I use:
-b
-E -1
https://i.ibb.co/6b6rkDG/2021-11-02-20-13-32.png
November 02, 2021, 12:06:53 PM
Did you tried rustpool?
An issue with rustpool is fixed in the next release 1.23
November 02, 2021, 07:46:24 AM
v1.20
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
zil.rustpool.xyz not working for me on my test rig.
Miner trying to connect but nothing happens. No dag building, received no jobs and so on. After 3 minutes i get a disconnect message because no jobs received for 3 minutes.
Test rig:
windows10
GTX1070 with driver 472.12 and tested TBM version 1.20, 1.21, 1.22 with cuda 11.2 and cuda 11.4.
Share your command line settings.
Dude i am not a noob and i know how to set the right values in the command line
TBMiner -a ethash -H eu1-zil.rustpool.xyz -p 8008 -P "zil-wallet"@eu1.ethermine.org:4444@4G -W "eth-wallet" -w test1 --api --api-port 4028
Did you tried rustpool? With this configuration all other miner work (t-rex, gminer, nbminer, lolminer). I only changed the miner specify arguments.
November 02, 2021, 06:23:48 AM
I'm running instances for 30 minutes of 1.20 vs 1.22 against the same pool
I have done a 6:46 hour test on high intensity on 2miners with TBM version v1.22.
A rtx 2060 Mobile gpu.
average (6 hours): 32.72MHASH
reported hashrate: 32.16
All looking normal. The miner window report stales, but no stale shares on the pool. Debug logs show nothing wrong, fee is mined ok.
The only thing I noticed was that the poolside hashrate in the first 30 minutes was abit low. Perhaps because of the PPLNS schema the pool is using.
I ran both for 8+ hours and they wound up averaging out to around the same. I think 2Miners has changed something as I see a lower hashrate and share rate in all circumstances. ETH profit is a bit lower (but 2miners luck has also been above 100% for a few days now), so, overall it seems both 1.20 and 1.22 are acting the same (but I do see that 1.22 seems to be slower in the beginning -- but it's probably just luck).
Thanks for taking a look into it!
November 02, 2021, 06:22:47 AM
v1.20
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
zil.rustpool.xyz not working for me on my test rig.
Miner trying to connect but nothing happens. No dag building, received no jobs and so on. After 3 minutes i get a disconnect message because no jobs received for 3 minutes.
Test rig:
windows10
GTX1070 with driver 472.12 and tested TBM version 1.20, 1.21, 1.22 with cuda 11.2 and cuda 11.4.
Share your command line settings.
November 02, 2021, 06:05:58 AM
v1.20
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
9. Added following pools: 666pool.cn, gpumine.org and rustpool.xyz.
zil.rustpool.xyz not working for me on my test rig.
Miner trying to connect but nothing happens. No dag building, received no jobs and so on. After 3 minutes i get a disconnect message because no jobs received for 3 minutes.
Test rig:
windows10
GTX1070 with driver 472.12 and tested TBM version 1.20, 1.21, 1.22 with cuda 11.2 and cuda 11.4.
November 02, 2021, 04:24:31 AM
Quote from: sp_
Retuning can give you a higher hashrate on lower clocks. Perhaps you need to add 2watts of power per card.
Some of your cards are working though. Is the 3 same cards crashing or is it random?
Some of your cards are working though. Is the 3 same cards crashing or is it random?
I'll test further
November 02, 2021, 04:13:59 AM
Yes, my clocks are high, as well as the hashrate, I'll not lower them. All the other miners run smoothly
Retuning can give you a higher hashrate on lower clocks. Perhaps you need to add 2watts of power per card.
Some of your cards are working though. Is the 3 same cards crashing or is it random?
November 02, 2021, 04:10:22 AM
Quote from: sp_
Quote from: poisons77
I tried the 1.22 both with --xintensity 60 and --dagintensity 1, still GPU are crashing and freezing the system
Perhaps your clocks are too high, or the power is too low to run this kernel on your computer. You might need to retune the rig to find the optimal settings for the Team Black Miner.
Yes, my clocks are high, as well as the hashrate, I'll not lower them. All the other miners run smoothly
November 02, 2021, 03:38:06 AM
Still same with unmineable.
Thats just weird as hell... Give it a try on your own, maybe its same issue. I dunno.
Will test now with "ETC" and check if the GPU is shown there.
Edit; Not showing up under ETC either as expected.
Thats just weird as hell... Give it a try on your own, maybe its same issue. I dunno.
Will test now with "ETC" and check if the GPU is shown there.
Edit; Not showing up under ETC either as expected.
We tested the example bat and get both workername and hashrates.
From the picture you have payout in shiba? Are you mining shiba? or do you have to switch back to the ethereum stats. For payout in shiba you need to change the adress to SHIB:Address in the bat file.
Quote
sudo cp libatiadlxx.so / usr / lib /
sudo cp libatiuki.so.1 / usr / lib /
How to add libraries to hiveos correctly?sudo cp libatiuki.so.1 / usr / lib /
You need to ssh into the rig and install from the console.
I tried the 1.22 both with --xintensity 60 and --dagintensity 1, still GPU are crashing and freezing the system
Perhaps your clocks are too high, or the power is too low to run this kernel on your computer. You might need to retune the rig to find the optimal settings for the Team Black Miner.
November 02, 2021, 01:15:38 AM
Quote
sudo cp libatiadlxx.so / usr / lib /
sudo cp libatiuki.so.1 / usr / lib /
sudo cp libatiuki.so.1 / usr / lib /
How to add libraries to hiveos correctly?
November 01, 2021, 09:31:09 PM
Code:
Additional step for AMD devices
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
TBM uses AMD ADL library to read GPU information from AMD cards.
We have added two AMD libraries to make this step a little easier.
This step is not neccesary if you already have the libraries.
The miner can work without them but then without statistics for AMD GPU cards.
Copy the shared objects (.so) to the systems library path:
sudo cp libatiadlxx.so /usr/lib/
sudo cp libatiuki.so.1 /usr/lib/
After doing this I get this error:
Code:
modprobe: FATAL: Module fglrx not found in directory /lib/modules/5.4.0-hiveos
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
Error! Fail to load fglrx kernel module! Maybe you can switch to root user to load kernel module directly
If I remove the 2 files from /usr/lib it works with no error, but also with no stats
3 of your gpus crashed when creating the dag and didn't start. Try v1.22 with --dagintensity 1
I tried the 1.22 both with --xintensity 60 and --dagintensity 1, still GPU are crashing and freezing the system[moderator's note: consecutive posts merged]
November 01, 2021, 07:19:30 PM
Maybe it is because it is an old HiveOs image file ? With new amd driver could work ? Amd drivers 20.40 (5.11.0701)
Use the latest HiveOs image file, and the latest nvidia driver.
I already have the latest nvidia driver, but I’ll try tomorrow to put the lastest HiveOs image file on the rig and give you the Feedback if working or not.
November 01, 2021, 06:56:19 PM
I'm running instances for 30 minutes of 1.20 vs 1.22 against the same pool
I have done a 6:46 hour test on high intensity on 2miners with TBM version v1.22.
A rtx 2060 Mobile gpu.
average (6 hours): 32.72MHASH
reported hashrate: 32.16
All looking normal. The miner window report stales, but no stale shares on the pool. Debug logs show nothing wrong, fee is mined ok.
The only thing I noticed was that the poolside hashrate in the first 30 minutes was abit low. Perhaps because of the PPLNS schema the pool is using.
Maybe it is because it is an old HiveOs image file ? With new amd driver could work ? Amd drivers 20.40 (5.11.0701)
Use the latest HiveOs image file, and the latest nvidia driver.
[moderator's note: consecutive posts merged]
November 01, 2021, 05:51:41 PM
--list-devices give me 0 to 4 cuda device (Nvidia) and 5 to 7 CL devices (amd).
So i put -Y [4,5,6] -U [0,1,2,3]
So i put -Y [4,5,6] -U [0,1,2,3]
Look in my picture.
--list-devices give
opencl
Device number: 5 (amd card)
so I use
-Y [5]
to enable the amd card. Does one card work?
I try only with -Y [5] or 6 or 7 on my side, no other parameters (see on my picture, I have 3 AMD card).
Again No device selected on my miner.
With -b AMD card works fine.
I try -Y [id] with id = 0 to 20, invalid CL for 0 to 4 and no devices for 5 to 20.
Maybe it is because it is an old HiveOs image file ? With new amd driver could work ? Amd drivers 20.40 (5.11.0701)
November 01, 2021, 05:06:31 PM
anyway to disable tbm from loading worker name command
It auto adds it so I put the command in and leave it blank and it just loads it twice...
The worker name field can be left blank or not added at all.
November 01, 2021, 04:53:44 PM
--list-devices give me 0 to 4 cuda device (Nvidia) and 5 to 7 CL devices (amd).
So i put -Y [4,5,6] -U [0,1,2,3]
So i put -Y [4,5,6] -U [0,1,2,3]
Look in my picture.
--list-devices give
opencl
Device number: 5 (amd card)
so I use
-Y [5]
to enable the amd card. Does one card work?
anyway to disable tbm from loading worker name command
The worker name field can be left blank or not added at all.
November 01, 2021, 04:27:11 PM
Also does anyone know how to fix rig Id duplicating itself.. it's loading rig ID on end of eth address and with worker config... anyway to disable tbm from loading worker name command... this needs work on raveOS for sure...
Jump to: