Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 66.

snoby67

newbie

Activity: 13

Merit: 0

Quote from: sp_ on November 01, 2021, 07:43:43 AM

Quote from: duddabudda on October 30, 2021, 12:28:09 PM

thanks! this is very good news! I promote TBM among the Russian miners community. already have satisfied users.

Thanks for your support. v1.22 has been added to hiveos.

Quote from: Chaf on October 31, 2021, 09:22:10 AM

Quote from: sp_ on October 31, 2021, 05:24:34 AM

Can you try v1.22?. Should work now.

I will try it when it will be added to HiveOS (:

Added to hiveos now.

Yep, I try with my bug on mixed rig... AMD cards still not work.
My AMD devices are 5, 6 and 7 (see the picture hereafter)
https://ibb.co/F5RncyJ
-Y [5,6,7] : no device are set
No problem on nvidia cards.

Only -b is working, so the nvidia cards should stay on other miner :-(

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: duddabudda on October 30, 2021, 12:28:09 PM

thanks! this is very good news! I promote TBM among the Russian miners community. already have satisfied users.

Thanks for your support. v1.22 has been added to hiveos.

Quote from: Chaf on October 31, 2021, 09:22:10 AM

Quote from: sp_ on October 31, 2021, 05:24:34 AM

Can you try v1.22?. Should work now.

I will try it when it will be added to HiveOS (:

Added to hiveos now.

wasarianta

newbie

Activity: 40

Merit: 0

Quote from: sp_ on November 01, 2021, 04:06:00 AM

To get good speed in epoch 450 you need a really high coreclock. To avoid trottleing you need high power. --kernel 0 can run on higher clocks, so might be the best. --xintensity 1500? you need to experiment and find a value that doesn't give you stale shares on the pool, and high value in the console.

ok sp_ ...i will try to find out and thank you

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: wasarianta on November 01, 2021, 03:59:54 AM

Any suggest setting 1080 for windows using TBM 1.22 cuda 11.5 besides --dagintensity 1 and pill ?
--kernel ?
--power-limit ?
--xintensity ? (2miners.com)
MSI AB coreclock and memclock ??

To get good speed in epoch 450 you need a really high coreclock. To avoid trottleing you need high power and templimit. --kernel 0 can run on higher clocks, so might be the best. --xintensity 1500? you need to experiment and find a value that doesn't give you stale shares on the pool, and high value in the console.

wasarianta

newbie

Activity: 40

Merit: 0

Quote from: ?? on ??

In v1.22 we have fixed the 0GB bug. 1080ti/1080 with pill (memtweak) is most stable with the cuda_11_5 build. Perhaps 1.22 will work on the P104.
use --dagintensity 1

Any suggest setting 1080 for windows using TBM 1.22 cuda 11.5 besides --dagintensity 1 and pill ?
--kernel ?
--power-limit ?
--xintensity ? (2miners.com)
MSI AB coreclock and memclock ??

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

You specify the workername twice
replace
Set ETH_WALLET=0x8Ef413F6D64A376FA46BF689d2f6c809d60C8e63.1070#wmfi-psn9

with

Set ETH_WALLET=0x8Ef413F6D64A376FA46BF689d2f6c809d60C8e63

ZerodayTrader

newbie

Activity: 29

Merit: 0

Thats what i tripple checked ofc. Thats just very weird.

Set ETH_WALLET=0x8Ef413F6D64A376FA46BF689d2f6c809d60C8e63.1070#wmfi-psn9

:loop
TBMiner --algo ethash --hostname ethash.unmineable.com --port 3333 --wallet ETH:%ETH_WALLET% --worker-name 1070#wmfi-psn9 --no-cpu --log --kernel 0 --xintensity 144
timeout 3
goto :loop

Just same as always.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Double check that you are mining to the right adress and not the default adress. and check the bat file

ZerodayTrader

newbie

Activity: 29

Merit: 0

Quote from: ?? on ??

Quote from: ZerodayTrader on October 31, 2021, 11:00:02 AM

Not that i dont like them, would love to have around 27mh/s with <115 to 125~ Watts. Cheesy

Perhaps you compiled the big c++ project of yours. High cpu usage or backround tasks can hurt the performance.
I see that you aren't on the latest version. You should upgrade.

Last crash was just browsing on some website. But testing with xintensity 144 still, maybe it was just unlucky.

Just noticed now that TeamBlackMiner_1_21_cuda_11_4 for some reason did not get shown up on unminable.com, and wasted lots of hours for nothing - thought its maybe their Problem, but with 1.15 directly shown under worker, hashrate increases.... Shocked

[moderator's note: consecutive posts merged]

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

try to add --cl-devices [7,6,5,4,3,2,1,0] and remove --auto-detect

xhorhex

newbie

Activity: 1

Merit: 0

hi, your miner is the only miner mixing order of GPUs in raveOS, first example: first two images, 2 crads in a rig, 6700 is GPU0, 5700 is GPU1, TBM reports 5700 as GPU0 and 6700 as GPU1, this leads to incorrect hashrates in raveOS UI, 6700 shows hashrate of 5700 and opposite

https://imagize[Suspicious link removed]ageshack.com/img923/8097/BWrjQg.png
https://imagize[Suspicious link removed]ageshack.com/img923/9501/bmmsTx.png

second example: rig of 8 cards, GPU0 is GPU7, GPU7 is GPU0, GPU1 is GPU6, GPU6 is GPU1 etc, also wrong reporting in UI for hashrate and power, on images you can see 1 card which is not working currently, TBM reports it as GPU6 while it is GPU1

https://imagize[Suspicious link removed]ageshack.com/img923/4953/yH8hRr.png
https://imagize[Suspicious link removed]ageshack.com/img924/1268/vMMJjP.png

hmm, looks like my links to images being removed by the system, maybe because of new account, anyway you got the idea, miner reports cards as 8 7 6 5 4 3 2 1 order while it is 1 2 3 4 5 6 7 8

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: KillrBee on October 31, 2021, 10:51:24 AM

I think there's a bug in the solution submission time display for 1.22. Are you taking the time off of an average instead of the submit to submit timer?

yes. Sorry about that we will fix it in 1.23

Quote from: ZerodayTrader on October 31, 2021, 11:00:02 AM

Not that i dont like them, would love to have around 27mh/s with <115 to 125~ Watts. Cheesy

Perhaps you compiled the big c++ project of yours. High cpu usage or backround tasks can hurt the performance.
I see that you aren't on the latest version. You should upgrade.

ZerodayTrader

newbie

Activity: 29

Merit: 0

Quote from: sp_ on October 31, 2021, 02:02:49 AM

Quote from: ZerodayTrader on October 30, 2021, 11:35:10 PM

Quote from: sp_ on October 30, 2021, 05:36:44 PM

Try --kernel 0

Looking better, great hashrate, but still tiny bit too unstable. With "normal" usage of this desktop. Sad

You can lower the --xintensity to f.ex 144

Giving it a try now. But whats going on with this Hashrate spikes?

https://i.imgur.com/u7jKCEr.png
https://i.imgur.com/FfIu0qa.png

Not that i dont like them, would love to have around 27mh/s with <115 to 125~ Watts. Cheesy

KillrBee

jr. member

Activity: 139

Merit: 3

I think there's a bug in the solution submission time display for 1.22. I'm running at around 136 MH/s and submitting a valid share about every 56 seconds, but the time on the client says (Submit every 1.61 seconds) and is increasing. Are you taking the time off of an average instead of the submit to submit timer?

Chaf

newbie

Activity: 11

Merit: 0

Quote from: sp_ on October 31, 2021, 05:24:34 AM

Quote from: Chaf on October 30, 2021, 04:00:17 AM

Quote from: sp_ on October 30, 2021, 03:20:24 AM

Quote from: Chaf on October 30, 2021, 01:51:22 AM

Hi ! I have a probleme to configure TBM on HiveOS. I have a rig witch mix Nvidia and AMD cards. Actually, your disable GPUs doesn't work, I can't put any card here, the miner doesn't start. I have to use the command --cuda-devices to select manually which Nvidia card I want to use. I want to do the same thing witch my AMD cards, so I used --cl-devices to select witch card to mine with. But it doesn't work. So how to select only some Nvidia cards and some AMD cards ?

use
tbminer --list-devices
to find the correct id of the amd card

That’s what I did, it didn’t work either.

Quote from: snoby67 on October 30, 2021, 12:12:08 PM

Choose Nvidia card ok no problem, choose only AMD card no problem, but choose couple of nvidia and all amd card impossible...

Can you try v1.22?. Should work now.

I will try it when it will be added to HiveOS (:

ayiphelmy

copper member

Activity: 416

Merit: 105

waiting for 1070ti speed upgrade.... with any high xintensity only hold 3minute bump hashrate and back to normal again 33.xx mhs, comparing other software can do 34.xx
thanks...

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: Chaf on October 30, 2021, 04:00:17 AM

Quote from: sp_ on October 30, 2021, 03:20:24 AM

Quote from: Chaf on October 30, 2021, 01:51:22 AM

Hi ! I have a probleme to configure TBM on HiveOS. I have a rig witch mix Nvidia and AMD cards. Actually, your disable GPUs doesn't work, I can't put any card here, the miner doesn't start. I have to use the command --cuda-devices to select manually which Nvidia card I want to use. I want to do the same thing witch my AMD cards, so I used --cl-devices to select witch card to mine with. But it doesn't work. So how to select only some Nvidia cards and some AMD cards ?

use
tbminer --list-devices
to find the correct id of the amd card

That’s what I did, it didn’t work either.

Quote from: snoby67 on October 30, 2021, 12:12:08 PM

Choose Nvidia card ok no problem, choose only AMD card no problem, but choose couple of nvidia and all amd card impossible...

Can you try v1.22?. Should work now.

Quote from: Ramsete2 on October 31, 2021, 05:16:29 AM

- 2miners has 26,33 TH/s with 56957 miners
Yesterday I made 0,06 ETH with 2,15 GH/s on Crazypool

- 2miners has 8 TH/s on the solopool as well.

Crazypool is a good pool, but to use it with TBM we/you need to find the optimal defaults. Perhaps a codechange in our program is needed. We could optimize for pools that don't pay for stales, but right now, we prefer pools which pay for stale shares. It's by design. Perhaps later.
--xintensity 160 or 144 is probobly best on this pool.

Quote from: poisons77 on October 30, 2021, 08:15:22 PM

Quote from: ?? on ??

--xintensity 60 works good on the 580

I tried again and it Failed. Key points:
- after the threads exited, the system freezes and I've to maually reboot

3 of your gpus crashed when creating the dag and didn't start. Try v1.22 with --dagintensity 1

Quote from: Alexstabilini on October 27, 2021, 03:06:46 PM

0m [2021-10-27 21:57:52.649] GPU0 0GB added to miner as Cuda device
0m [2021-10-27 21:57:52.696] Trying eth.pool.zet-tech.eu:8005 (ethash)
0m [2021-10-27 21:57:52.743] Pool responded successfully to subscribe
0m [2021-10-27 21:57:52.837] GPU0 Started Cuda work thread

In v1.22 we have fixed the 0GB bug. 1080ti/1080 with pill (memtweak) is most stable with the cuda_11_5 build. Perhaps 1.22 will work on the P104.
use --dagintensity 1

Ramsete2

jr. member

Activity: 87

Merit: 5

Quote from: sp_ on October 31, 2021, 03:57:00 AM

Quote from: Ramsete2 on October 31, 2021, 03:48:05 AM

Because on Crazypool I'm getting about 10% more in profits, compared to the pools you mentioned.

Crazyypool: 1.64 TH
Total network: 727 TH

Crazypool has only 0.22% of the total ethereum network hashrate. If it's 10% more profitable than other pools, why don't everybody switch?

nanopool.org, 2miners.com and miningpoolhub.com has 90THASH (12.3% of the network)

You don't see things on proportion:

- Nanopool has 37.89 TH/s with 47829 miners
- 2miners has 26,33 TH/s with 56957 miners
- Miningpoolhub has 17,85 TH/s with 140284 miners
- Crazypool has 1,65 TH/s with 2869 miners

Yesterday I made 0,06 ETH with 2,15 GH/s on Crazypool

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: ?? on ??

We are close to do LHR 1 90% unlock on linux/windows..

We added the --lhr-unlock [1,1,0,0,0,0] in v1.22 but it's not working 100% yet. But you can test if it works. (This is an early beta, so expect unstable mining. With debug output and not ready for production. Check if the hashrate increases after "reset" in the console)

Limitations

1. Needs 8gb memory in the rig.
2. Faster speed with Cards on X16 riser.
3. Unlock a minimum of 2 LHR cards in the rig. So 1 standalone card doesn't work.

cost82el

newbie

Activity: 91

Merit: 0

Quote from: ?? on ??

v1.22
1. Uptime error in day is corrected.
2. Added --dagintensity support for AMD cards.
3. Fixed a print bug for cuda showing 0gb memory for cards.
4. Fixed --cl-devices [] for multicard rigs AMD/NVIDIA
5. Fixed index bug in stats when using --cu-devices
6. Added more pools.

https://github.com/sp-hash/TeamBlackMiner/releases

TeamBlackMiner_1_22_cuda_11_5.7z
https://www.virustotal.com/gui/file/cd362cc284613bf970698d16b2859b0aa9f23043faed2304338700887ab2dfdd?nocache=1

TeamBlackMiner_1_22_cuda_11_4.7z
https://www.virustotal.com/gui/file/d53a27670eb625d68465b076b6fb52b7936822050ba9d29bd7e5b69a9a44d69f?nocache=1

TeamBlackMiner_1_22_cuda_11_2.7z
https://www.virustotal.com/gui/file/aaa18d5422cc944e66c14ba1e7e201b67959a0b0b3176ac8ac76c058e650f36d?nocache=1

no LHR unlock?

Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 66. (Read 35100 times)