Hi,
Since the board gets really hot in the summer I decided to change the fans - the original ones were:
Evercool EC9225M12SA
Dimensions: 92x92x25 mm
Power: 1.8 W
Speed: 2200 rpm
Air Flow: 40.9 CFM
Noise: 25 dB
The information on OP was wrong - sorry about that
I've changed the top fan with:
Evercool EC9225HH12BA
Dimensions: 92x92x25 mm
Power: 3.24 W
Speed: 3000 rpm
Air Flow: 61.51 CFM
Noise: 35 dB
..and the bottom with a spare from HEX16B:
Sunon EE92251S1-0000-A99
Dimensions: 92x92x25 mm
Power: 2.0 W
Speed: 3000 rpm
Air Flow: 51.5 CFM
Noise: 34 dB
How it's running cool at 260/980 => ~130GH
btw I've updated the price chart you can see it here:
Updated Price Chart[/i]
Topic: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed (Read 7460 times)
sudo su didnt help
Sorry dude......finally if you can enable ssh and give me remote access i can try to help youi have run in to a new problem. the miner is visible and if i pull out the usb a message appears on the screen wich is good news.
i will send you a pm pretty soon so you can ssh it if you feel like it..
No submissions
Type " top " & post the screen shot.
No submissions
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool managementettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:0 R:0 HW:0 WU:0.0/m
Connected to "pool" diff 8 with stratum as user "user"
Block: 9ffe96f9... Diff:73.4K Started: [09:52:35] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool management
--------------------------------------------------------------------------------
[2014-04-10 09:52:24] Started cgminer 4.2.2
[2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
[2014-04-10 09:52:25] No devices detected!
[2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
[2014-04-10 09:52:25] Probing for an alive pool
[2014-04-10 09:52:26] Pool 0 difficulty changed to 8
[2014-04-10 09:52:26] Network diff set to 73.5K
[2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
[2014-04-10 09:52:35] Network diff set to 73.4K
[2014-04-10 09:52:35] Stratum from pool 0 detected new block
As HellDiverUK said, there is other cgminer run in your host, maybe you just not know how to see it.
I test this already & the message is same.
Check your pool, your worker must be submitting share this whole time LOL.
maybe some other time....
Good luck dude
maybe some other time....
sudo su didnt help
Sorry dude......finally if you can enable ssh and give me remote access i can try to help you
sudo su didnt help
i did that to start with. i mentioned that i have two linux installed when i asked where i could find somebody who knows how i could copy wallet and data files from the terminal... remember?
You are loosing too much time dude fighting with linuxNo hard feelings but try to find a tplink asap or try hexminer Microsoft s...t
Unfortunately i will not be able to give you hints with M$ but other folks will for sure
Good luck
Finally
type sudo su
And try all over again
i did that to start with. i mentioned that i have two linux installed when i asked where i could find somebody who knows how i could copy wallet and data files from the terminal... remember?
i dont think i can find tplink in a store near where i live. a new raspberry pi should work so installing os and miner shouldnt be a problem.
Then in mean time try to reinstall the linux
i dont think i can find tplink in a store near where i live. a new raspberry pi should work so installing os and miner shouldnt be a problem.
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
You can buy tplink from local store behind the corner much more chipper than Pi. And flash iti thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
Tplink can handle a lot even though it seems less powerful compared to PI
Let say 10 HEx8 - 2.1T in total without issues - personal experience.
So do not worry
And with Rpi you still need to install the OS, then compile the cgminer.
With TPLINK you only need to flash with latest firmware from technobit & ready to go.
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
You can buy tplink from local store behind the corner much more chipper than Pi. And flash iti thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
Tplink can handle a lot even though it seems less powerful compared to PI
Let say 9 (My bad) HEx8 - 2.1T in total without issues - personal experience.
So do not worry
I am too lasy for screen shots
cgminer version 4.2.3 - Started: [2014-04-07 14:06:04]
--------------------------------------------------------------------------------
(5s):548.0G (1m):2.100T (5m):2.100T (15m):2.041T (avg):2.100Th/s
A:170947100 R:487226 HW:1600021 WU:29340.5/m
Connected to stratum-lb-usa48.btcguild.com diff 1.02K with stratum as user
Block: 1bbf4d6f... Diff:6.12G Started: [15:26:31] Best share: 239M
--------------------------------------------------------------------------------
SB management [P]ool management
0: HEX8 0 : 230 860/ 863mV | 9.443G / 233.8Gh/s WU:3266.8/m
1: HEX8 1 : 230 860/ 859mV | 516.1G / 231.2Gh/s WU:3229.3/m
2: HEX8 2 : 230 860/ 871mV | 71.73G / 235.6Gh/s WU:3291.3/m
3: HEX8 3 : 230 860/ 860mV | 15.02G / 235.2Gh/s WU:3285.1/m
4: HEX8 4 : 230 860/ 870mV | 46.55G / 227.4Gh/s WU:3176.5/m
5: HEX8 5 : 230 860/ 864mV | 77.03G / 233.8Gh/s WU:3266.6/m
6: HEX8 6 : 230 860/ 858mV | 1.679T / 234.5Gh/s WU:3275.6/m
7: HEX8 7 : 230 860/ 859mV | 105.8G / 235.5Gh/s WU:3289.9/m
8: HEX8 8 : 230 860/ 862mV | 8.153G / 233.3Gh/s WU:3259.3/m
--------------------------------------------------------------------------------
[detached]
root@HEX16A:~# uptime
15:30:56 up 4 days, 1:25, load average: 1.23, 1.63, 1.71
its just that with shipping costs you almost pay twice the value for the product.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
i thought of a raspberry pi, it costs more but it is more powerfull and you can use it the same way as a computer. And i will have it before the tplink would have arrived.
I guess your linux system already contaminated. Times to move on & buy TPLINK TL-MR3020 
+1 and forget about suffering Or type sudo su
and try again
But as Zich said just go for a tplink
I guess your linux system already contaminated. Times to move on & buy TPLINK TL-MR3020
tmp dont exist. can not create newfolder. cgminer folder may be write protectet.
Code:
b@b-Lenovo-Ideapad-S12:~/cgminer-4.2.2$ sudo rm tmp/cgminer-usb-3-7
[sudo] password for b:
rm: cannot remove ‘tmp/cgminer-usb-3-7’: No such file or directory
b@b-Lenovo-Ideapad-S12:~/cgminer-4.2.2$ lsmod
Module Size Used by
binfmt_misc 17260 1
cdc_acm 22338 0
parport_pc 27504 0
ppdev 12817 0
snd_hda_codec_hdmi 36143 1
bnep 17736 2
rfcomm 37420 0
bluetooth 202266 10 bnep,rfcomm
snd_hda_codec_realtek 63829 1
coretemp 13131 0
joydev 17097 0
nouveau 843003 3
lib80211_crypt_tkip 17229 0
acer_wmi 27592 0
mxm_wmi 12893 1 nouveau
wl 2906469 0
ttm 75385 1 nouveau
drm_kms_helper 47545 1 nouveau
snd_hda_intel 38307 3
snd_hda_codec 117617 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
drm 228489 5 ttm,drm_kms_helper,nouveau
snd_hwdep 13272 1 snd_hda_codec
i2c_algo_bit 13197 1 nouveau
microcode 18286 0
snd_pcm 80890 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
lib80211 14040 2 wl,lib80211_crypt_tkip
uvcvideo 71279 0
cfg80211 440887 1 wl
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
videobuf2_vmalloc 12920 1 uvcvideo
snd_seq_midi 13132 0
psmouse 81065 0
shpchp 32129 0
snd_seq_midi_event 14475 1 snd_seq_midi
serio_raw 13031 0
videobuf2_memops 13042 1 videobuf2_vmalloc
snd_rawmidi 25114 1 snd_seq_midi
videobuf2_core 39161 1 uvcvideo
ideapad_laptop 18018 0
videodev 95806 2 uvcvideo,videobuf2_core
sparse_keymap 13658 2 acer_wmi,ideapad_laptop
snd_seq 51280 2 snd_seq_midi_event,snd_seq_midi
video 18894 2 acer_wmi,nouveau
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 24411 2 snd_pcm,snd_seq
snd 56485 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 12600 1 snd
wmi 18590 3 acer_wmi,mxm_wmi,nouveau
mac_hid 13037 0
1. Make sure that /tmp folder exists -
2. do sudo rm tmp/cgminer-usb-3-7
3. run cgminer with SUDO as advised
Please post the output of lsmod
2. do sudo rm tmp/cgminer-usb-3-7
3. run cgminer with SUDO as advised
Please post the output of lsmod
Jump to: