Bitcoin Forum>Bitcoin>Mining>Hardware
Pages:
Author

Topic: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed - page 2. (Read 7460 times)

shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 05:50:03 AM
#49
agement [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
 [2014-04-11 12:48:48] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 12:48:48] USB scan devices: checking for HEX8 devices
 [2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 5986:0241 instead
 [2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 12:48:49] HEX8 looking for and found HEX8 04d8:000a
 [2014-04-11 12:48:49] USB lock hexminer8 3-7
 [2014-04-11 12:48:49] RES: hexminer8 (3:7) lock=1
 [2014-04-11 12:48:49] USB res lock hexminer8 3-7
 [2014-04-11 12:48:49] hexminer8 USB failed to get '/tmp/cgminer-usb-3-7' - device in use
 [2014-04-11 12:48:49] RES: hexminer8 (3:7) lock ok=0
 [2014-04-11 12:48:49] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 12:48:49] Discarded work
 [2014-04-11 12:48:49] Selecting pool 0 for work
 [2014-04-11 12:48:49] Generated stratum merkle 145b1c5d9dcfd979287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b
 [2014-04-11 12:48:49] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000145b1c5 d9dcfd9
79287f257ce325bfd2f9f3affa5e80e1a72932a6722b402a5b5347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
 [2014-04-11 12:48:49] Work job_id ea70 nonce2 6 ntime 5347c883
 [2014-04-11 12:48:49] Generated target 00000000000000000000000000000000000000000000000000e0ff1f00000000
 [2014-04-11 12:48:49] Generated stratum work
 [2014-04-11 12:48:49] Pushing work from pool 0 to hash queue
 [2014-04-11 12:48:51] Discarded work
 [2014-04-11 12:48:51] Selecting pool 0 for work
 [2014-04-11 12:48:51] Generated stratum merkle 218fa8bcba107ce7996911463491ff5d94e83de16b9a3309263d93bb759491f9
 [2014-04-11 12:48:51] Generated stratum header 00000002bf320ad710d80389eaad8310431dea5172bf4ea8792ac64300002f4900000000218fa8b cba107c
e7996911463491ff5d94e83de16b9a3309263d93bb759491f95347c8831b0122880000000000000 0800000000000000000000000000000000000000000000000000000
0000
 [2014-04-11 12:48:51] Work job_id ea70 nonce2 7 ntime 5347c883
 [2014-04-11 12:48:51] Generated target 000000000000000000000000000
loshia
legendary
Activity: 1610
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 05:25:08 AM
#48
Quote from: shortpocket on April 11, 2014, 05:04:46 AM
when inserting into another port the device number changes. its still bus 3.

Code:
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 007: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Quote
shortpocket,
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?

yes
Can you run it with debugging enabled?
just type

./cgminer -D

you should see something like

 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000b but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXb looking for HEXb 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] USB scan devices: checking for HEXc devices
 [2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXc looking for HEXc 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] USB scan devices: checking for HEX8 devices
 [2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX8 looking for HEX8 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] USB scan devices: checking for HEX3 devices
 [2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEX3 looking for HEX3 04d8:000a but found 1d6b:0001 instead
 [2014-04-11 13:24:30] USB scan devices: checking for HEXu devices
 [2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0002 instead
 [2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead
 [2014-04-11 13:24:30] HEXu looking for HEXu 04d8:00de but found 1d6b:0001 instead

And post back your result

10X
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 05:04:46 AM
#47
when inserting into another port the device number changes. its still bus 3.

Code:
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 007: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Quote
shortpocket,
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?

yes
loshia
legendary
Activity: 1610
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 04:49:23 AM
#46
Quote from: Zich on April 11, 2014, 04:47:27 AM
Quote from: shortpocket on April 11, 2014, 04:30:16 AM
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo, this is your miner.
But it's located on usb 1 root. Try to moved it to usb 2 root.
shortpocket,
ARE YOU 100% THAT cgminer is PATCHED???
And you are executing the patched version?
Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 04:47:27 AM
#45
Quote from: shortpocket on April 11, 2014, 04:30:16 AM
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo, this is your miner.
But it's located on usb 1 root. Try to moved it to usb 2 root.
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 04:30:16 AM
#44
Quote
Bus 001 Device 002: ID 5986:0241 Acer, Inc BisonCam, NB Pro
Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Code:
          SECAM - 625/50
          NTSC - 625/50
      VideoControl Interface Descriptor:
        bLength                27
        bDescriptorType        36
        bDescriptorSubtype      6 (EXTENSION_UNIT)
        bUnitID                 6
        guidExtensionCode         {564c97a7-7ea7-904b-8cbf-1c71ec303000}
        bNumControl            16
        bNrPins                 1
        baSourceID( 0)          5
        bControlSize            2
        bmControls( 0)       0xff
        bmControls( 1)       0xff
        iExtension              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              15
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      VideoStreaming Interface Descriptor:
        bLength                            14
        bDescriptorType                    36
        bDescriptorSubtype                  1 (INPUT_HEADER)
        bNumFormats                         1
        wTotalLength                      261
        bEndPointAddress                  129
        bmInfo                              0
        bTerminalLink                       3
        bStillCaptureMethod                 0
        bTriggerSupport                     0
        bTriggerUsage                       0
        bControlSize                        1
        bmaControls( 0)                    27
      VideoStreaming Interface Descriptor:
        bLength                            27
        bDescriptorType                    36
        bDescriptorSubtype                  4 (FORMAT_UNCOMPRESSED)
        bFormatIndex                        1
        bNumFrameDescriptors                6
        guidFormat                            {59555932-0000-1000-8000-00aa00389b71}
        bBitsPerPixel                      16
        bDefaultFrameIndex                  1
        bAspectRatioX                       0
        bAspectRatioY                       0
        bmInterlaceFlags                 0x00
          Interlaced stream or variable: No
          Fields per frame: 2 fields
          Field 1 first: No
          Field pattern: Field 1 only
          bCopyProtect                      0
      VideoStreaming Interface Descriptor:
        bLength                            38
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         1
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                            640
        wHeight                           480
        dwMinBitRate                 12288000
        dwMaxBitRate                 12288000
        dwMaxVideoFrameBufferSize      614400
        dwDefaultFrameInterval         555555
        bFrameIntervalType                  3
        dwFrameInterval( 0)            555555
        dwFrameInterval( 1)            666666
        dwFrameInterval( 2)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            38
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         2
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                            320
        wHeight                           240
        dwMinBitRate                  3072000
        dwMaxBitRate                  3072000
        dwMaxVideoFrameBufferSize      153600
        dwDefaultFrameInterval         555555
        bFrameIntervalType                  3
        dwFrameInterval( 0)            555555
        dwFrameInterval( 1)            666666
        dwFrameInterval( 2)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            38
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         3
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                            160
        wHeight                           120
        dwMinBitRate                   768000
        dwMaxBitRate                   768000
        dwMaxVideoFrameBufferSize       38400
        dwDefaultFrameInterval         555555
        bFrameIntervalType                  3
        dwFrameInterval( 0)            555555
        dwFrameInterval( 1)            666666
        dwFrameInterval( 2)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            38
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         4
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                            352
        wHeight                           288
        dwMinBitRate                  4055040
        dwMaxBitRate                  4055040
        dwMaxVideoFrameBufferSize      202752
        dwDefaultFrameInterval         555555
        bFrameIntervalType                  3
        dwFrameInterval( 0)            555555
        dwFrameInterval( 1)            666666
        dwFrameInterval( 2)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            38
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         5
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                            176
        wHeight                           144
        dwMinBitRate                  1013760
        dwMaxBitRate                  1013760
        dwMaxVideoFrameBufferSize       50688
        dwDefaultFrameInterval         555555
        bFrameIntervalType                  3
        dwFrameInterval( 0)            555555
        dwFrameInterval( 1)            666666
        dwFrameInterval( 2)           1000000
      VideoStreaming Interface Descriptor:
        bLength                            30
        bDescriptorType                    36
        bDescriptorSubtype                  5 (FRAME_UNCOMPRESSED)
        bFrameIndex                         6
        bmCapabilities                   0x00
          Still image unsupported
        wWidth                           1280
        wHeight                          1024
        dwMinBitRate                 26214400
        dwMaxBitRate                 26214400
        dwMaxVideoFrameBufferSize     2621440
        dwDefaultFrameInterval        1000000
        bFrameIntervalType                  1
        dwFrameInterval( 0)           1000000
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x1400  3x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       2
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x1400  3x 1024 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       3
      bNumEndpoints           1
      bInterfaceClass        14 Video
      bInterfaceSubClass      2 Video Streaming
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            5
          Transfer Type            Isochronous
          Synch Type               Asynchronous
          Usage Type               Data
        wMaxPacketSize     0x1400  3x 1024 bytes
        bInterval               1

Bus 003 Device 005: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x04d8 Microchip Technology, Inc.
  idProduct          0x000a CDC RS-232 Emulation Demo
  bcdDevice            1.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0 
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1 
      CDC Call Management:
        bmCapabilities       0x00
        bDataInterface          1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  1x 10 bytes
        bInterval               1
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.08
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.08
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            3.08
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            3.08
  iManufacturer           3 
  iProduct                2 
  iSerial                 1 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255

[code]
[    1.152132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.152142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.152150] usb usb1: Product: EHCI Host Controller
[    1.152158] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[    1.152166] usb usb1: SerialNumber: 0000:00:04.1
[    1.152522] hub 1-0:1.0: USB hub found
[    1.152539] hub 1-0:1.0: 6 ports detected
[    1.153267] ehci-pci 0000:00:06.1: setting latency timer to 64
[    1.153278] ehci-pci 0000:00:06.1: EHCI Host Controller
[    1.153296] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    1.153318] ehci-pci 0000:00:06.1: debug port 1
[    1.153362] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    1.153408] ehci-pci 0000:00:06.1: irq 19, io mem 0xc0007400
[    1.164058] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    1.164125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.164134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.164142] usb usb2: Product: EHCI Host Controller
[    1.164150] usb usb2: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[    1.164157] usb usb2: SerialNumber: 0000:00:06.1
[    1.164631] hub 2-0:1.0: USB hub found
[    1.164647] hub 2-0:1.0: 6 ports detected
[    1.165304] ehci-platform: EHCI generic platform driver
[    1.165345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.165439] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    1.165449] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    1.165467] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[    1.165535] ohci_hcd 0000:00:04.0: irq 22, io mem 0xc0006000
[    1.222112] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.222122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.222131] usb usb3: Product: OHCI Host Controller
[    1.222139] usb usb3: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.222146] usb usb3: SerialNumber: 0000:00:04.0
[    1.222568] hub 3-0:1.0: USB hub found
[    1.222586] hub 3-0:1.0: 6 ports detected
[    1.222960] ohci_hcd 0000:00:06.0: setting latency timer to 64
[    1.222970] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    1.222987] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[    1.223048] ohci_hcd 0000:00:06.0: irq 20, io mem 0xc0008000
[    1.242612] ACPI: EC: GPE storm detected(9 GPEs), transactions will use polling mode
[    1.278076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.278086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278094] usb usb4: Product: OHCI Host Controller
[    1.278102] usb usb4: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.278109] usb usb4: SerialNumber: 0000:00:06.0
[    1.278448] hub 4-0:1.0: USB hub found
[    1.278464] hub 4-0:1.0: 6 ports detected
[    1.278940] uhci_hcd: USB Universal Host Controller Interface driver
[    1.279234] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.290933] i8042: Detected active multiplexing controller, rev 1.1
[    1.298233] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.298254] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.298367] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.298446] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.298532] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.298914] mousedev: PS/2 mouse device common for all mice
[    1.299446] rtc_cmos 00:07: RTC can wake from S4
[    1.299792] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.299860] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.300219] device-mapper: uevent: version 1.0.3
[    1.300419] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[    1.300481] EISA: Probing bus 0 at eisa.0
[    1.300490] EISA: Cannot allocate resource for mainboard
[    1.300498] Cannot allocate resource for EISA slot 1
[    1.300505] Cannot allocate resource for EISA slot 2
[    1.300512] Cannot allocate resource for EISA slot 3
[    1.300519] Cannot allocate resource for EISA slot 4
[    1.300526] Cannot allocate resource for EISA slot 5
[    1.300533] Cannot allocate resource for EISA slot 6
[    1.300540] Cannot allocate resource for EISA slot 7
[    1.300546] Cannot allocate resource for EISA slot 8
[    1.300552] EISA: Detected 0 cards.
[    1.300575] cpufreq-nforce2: No nForce2 chipset.
[    1.300700] cpuidle: using governor ladder
[    1.300857] cpuidle: using governor menu
[    1.300866] ledtrig-cpu: registered to indicate activity on CPUs
[    1.300872] EFI Variables Facility v0.08 2004-May-17
[    1.301473] ashmem: initialized
[    1.301851] TCP: cubic registered
[    1.302254] NET: Registered protocol family 10
[    1.302787] NET: Registered protocol family 17
[    1.302820] Key type dns_resolver registered
[    1.303302] Using IPI No-Shortcut mode
[    1.303569] Loading module verification certificates
[    1.318302] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: bab43694c655e6aee9fceadd34ffb05cf4363bc5'
[    1.318338] registered taskstats version 1
[    1.326558] Key type trusted registered
[    1.332450] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.334873] Key type encrypted registered
[    1.343528] rtc_cmos 00:07: setting system clock to 2014-04-10 05:13:46 UTC (1397106826)
[    1.344657] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.344664] EDD information not available.
[    1.455509] isapnp: No Plug & Play device found
[    1.464059] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    1.834504] usb 1-4: New USB device found, idVendor=5986, idProduct=0241
[    1.834522] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.834536] usb 1-4: Product: Lenovo EasyCamera
[    1.834547] usb 1-4: Manufacturer: BISON Corporation
[    1.928455] ACPI: Battery Slot [BAT0] (battery present)
[    1.928666] Freeing unused kernel memory: 792k freed
[    1.929305] Write protecting the kernel text: 6264k
[    1.929446] Write protecting the kernel read-only data: 2484k
[    1.929452] NX-protecting the kernel data: 3976k
[    1.964926] udevd[97]: starting version 175
[    2.361799] Disabling lock debugging due to kernel taint
[    2.363936] ahci 0000:00:0b.0: version 3.0
[    2.371809] pps_core: LinuxPPS API ver. 1 registered
[    2.371820] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    2.379314] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[    2.379462] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[    2.379506] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    2.379662] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.379675] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part
[    2.379687] ahci 0000:00:0b.0: setting latency timer to 64
[    2.407817] scsi0 : ahci
[    2.412710] scsi1 : ahci
[    2.416163] scsi2 : ahci
[    2.417799] PTP clock support registered
[    2.420134] scsi3 : ahci
[    2.442019] scsi4 : ahci
[    2.445675] scsi5 : ahci
[    2.445991] ata1: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 40
[    2.446001] ata2: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 40
[    2.446008] ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004200 irq 40
[    2.446016] ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004280 irq 40
[    2.446024] ata5: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004300 irq 40
[    2.446031] ata6: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004380 irq 40
[    2.460413] tg3.c:v3.128 (December 03, 2012)
[    2.504231] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1f:16:35:6a:02
[    2.504247] tg3 0000:06:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[    2.504257] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.504267] tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.776108] ata3: SATA link down (SStatus 0 SControl 300)
[    2.776183] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.776213] ata2: SATA link down (SStatus 0 SControl 300)
[    2.777135] ata1.00: ATA-8: HITACHI HTS545032B9A300, PB3ZC61H, max UDMA/100
[    2.777150] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.778271] ata1.00: configured for UDMA/100
[    2.778723] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54503 PB3Z PQ: 0 ANSI: 5
[    2.779418] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.779474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.779672] sd 0:0:0:0: [sda] Write Protect is off
[    2.779683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.779816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.780084] ata4: SATA link down (SStatus 0 SControl 300)
[    2.780129] ata5: SATA link down (SStatus 0 SControl 300)
[    2.780157] ata6: SATA link down (SStatus 0 SControl 300)
[    2.819793]  sda: sda1 sda2 < sda5 sda6 >
[    2.821119] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.624403] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    4.624415] EXT4-fs (sda6): write access will be enabled during recovery
[    5.693849] EXT4-fs (sda6): recovery complete
[    5.704956] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.541243] Adding 1832956k swap on /dev/sda5.  Priority:-1 extents:1 across:1832956k
[   16.668387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.792298] udevd[389]: starting version 175
[   17.395892] lp: driver loaded but no devices found
[   17.402056] ACPI Warning: 0x00003040-0x0000307f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20121018/utaddress-251)
[   17.402079] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.402090] ACPI Warning: 0x00002000-0x0000203f SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20121018/utaddress-251)
[   17.402105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.660157] wmi: Mapper loaded
[   18.154490] Linux video capture interface: v2.00
[   18.240431] acpi device:0f: registered as cooling_device2
[   18.240858] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[   18.241048] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/LNXVIDEO:00/input/input5
[   18.245881] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6
[   18.335201] type=1400 audit(1397106843.485:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=620 comm="apparmor_parser"
[   18.336798] type=1400 audit(1397106843.489:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser"
[   18.337635] type=1400 audit(1397106843.489:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser"
[   18.345680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.525695] cfg80211: Calling CRDA to update world regulatory domain
[   18.568556] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0241)
[   18.574803] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input7
[   18.575344] usbcore: registered new interface driver uvcvideo
[   18.575355] USB Video Class driver (1.1.1)
[   18.621782] lib80211: common routines for IEEE802.11 drivers
[   18.621794] lib80211_crypt: registered algorithm 'NULL'
[   18.696805] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[   18.729613] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   19.054347] [drm] Initialized drm 1.1.0 20060810
[   19.144149] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[   19.144198] hda_intel: Disabling MSI
[   19.144314] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[   19.412864] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa04000/0x0, board id: 3655, fw id: 437347
[   19.457002] wl: module license 'MIXED/Proprietary' taints kernel.
[   19.470839] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[   19.610863] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[   19.617150] acer_wmi: Acer Laptop ACPI-WMI Extras
[   19.630619] acer_wmi: Brightness must be controlled by acpi video driver
[   19.631727] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[   19.727360] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   19.842979] lib80211_crypt: registered algorithm 'TKIP'
[   19.904264] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   19.927622] cfg80211: World regulatory domain updated:
[   19.927633] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.927641] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.927647] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.927653] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.927660] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.927666] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.945029] nouveau 0000:05:00.0: setting latency timer to 64
[   19.945627] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
[   19.948847] nouveau  [  DEVICE][0000:05:00.0] BOOT0  : 0x0acb00b1
[   19.948860] nouveau  [  DEVICE][0000:05:00.0] Chipset: MCP79/MCP7A (NVAC)
[   19.948868] nouveau  [  DEVICE][0000:05:00.0] Family : NV50
[   19.952069] nouveau  [   VBIOS][0000:05:00.0] checking PRAMIN for image...
[   20.072256] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264)
[   20.094012] nouveau  [   VBIOS][0000:05:00.0] ... appears to be valid
[   20.094027] nouveau  [   VBIOS][0000:05:00.0] using image from PRAMIN
[   20.094661] nouveau  [   VBIOS][0000:05:00.0] BIT signature found
[   20.094677] nouveau  [   VBIOS][0000:05:00.0] version 62.79.62.00.00
[   20.184100] nouveau  [     PFB][0000:05:00.0] RAM type: stolen system memory
[   20.184114] nouveau  [     PFB][0000:05:00.0] RAM size: 256 MiB
[   20.184124] nouveau  [     PFB][0000:05:00.0]    ZCOMP: 0 tags
[   20.262970] init: failsafe main process (815) killed by TERM signal
[   20.325608] [TTM] Zone  kernel: Available graphics memory: 441914 kiB
[   20.325618] [TTM] Zone highmem: Available graphics memory: 902078 kiB
[   20.325624] [TTM] Initializing pool allocator
[   20.325641] [TTM] Initializing DMA pool allocator
[   20.325911] nouveau  [     DRM] VRAM: 256 MiB
[   20.325922] nouveau  [     DRM] GART: 512 MiB
[   20.325934] nouveau  [     DRM] BIT BIOS found
[   20.325944] nouveau  [     DRM] Bios version 62.79.62.00
[   20.325954] nouveau  [     DRM] TMDS table version 2.0
[   20.325960] nouveau  [     DRM] DCB version 4.0
[   20.325967] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[   20.325974] nouveau  [     DRM] DCB outp 01: 02011300 0000001e
[   20.325980] nouveau  [     DRM] DCB outp 02: 02022332 00020010
[   20.325986] nouveau  [     DRM] DCB conn 00: 00000040
[   20.325993] nouveau  [     DRM] DCB conn 01: 00000100
[   20.325999] nouveau  [     DRM] DCB conn 02: 00001261
[   20.349464] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   20.349474] [drm] No driver support for vblank timestamp query.
[   20.349485] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   21.362870] Bluetooth: Core ver 2.16
[   21.372393] NET: Registered protocol family 31
[   21.372403] Bluetooth: HCI device and connection manager initialized
[   21.373692] Bluetooth: HCI socket layer initialized
[   21.373707] Bluetooth: L2CAP socket layer initialized
[   21.373737] Bluetooth: SCO socket layer initialized
[   21.535481] nouveau  [     DRM] 4 available performance level(s)
[   21.535501] nouveau  [     DRM] 0: core 200MHz shader 400MHz voltage 900mV fanspeed 60%
[   21.535514] nouveau  [     DRM] 1: core 300MHz shader 600MHz voltage 900mV fanspeed 100%
[   21.535527] nouveau  [     DRM] 2: core 350MHz shader 800MHz voltage 900mV fanspeed 100%
[   21.535540] nouveau  [     DRM] 3: core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
[   21.535547] nouveau  [     DRM] c:
[   21.580039] nouveau  [     DRM] MM: using M2MF for buffer copies
[   21.608111] Bluetooth: RFCOMM TTY layer initialized
[   21.608143] Bluetooth: RFCOMM socket layer initialized
[   21.608150] Bluetooth: RFCOMM ver 1.11
[   21.631006] nouveau  [     DRM] allocated 1280x800 fb: 0x50000, bo f35b3e00
[   21.637406] fbcon: nouveaufb (fb0) is primary device
[   21.686898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.686901] Bluetooth: BNEP filters: protocol multicast
[   21.686922] Bluetooth: BNEP socket layer initialized
[   21.926780] Console: switching to colour frame buffer device 160x50
[   21.927880] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[   21.927889] nouveau 0000:05:00.0: registered panic notifier
[   21.927907] [drm] Initialized nouveau 1.1.0 20120801 for 0000:05:00.0 on minor 0
[   22.209593] type=1400 audit(1397106847.361:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=940 comm="apparmor_parser"
[   22.210834] type=1400 audit(1397106847.361:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=940 comm=&
Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 11, 2014, 03:48:26 AM
#43
type following command on terminal:
Code:
lsusb
Code:
lsusb -v
Code:
dmesg

Post each output from that command.
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 10:19:01 AM
#42
Quote
lsusb output?
+ lsusb -v
+ dmesg

further explanation?

Quote
have you tried with other usb cable?

the hex have been available during preveous install. cant remember wich version.
loshia
legendary
Activity: 1610
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 09:04:37 AM
#41
Quote from: shortpocket on April 10, 2014, 08:13:26 AM
Have been patched.
No other instance is running.
lsusb output?
+ lsusb -v
+ dmesg
have you tried with other usb cable?
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 08:13:26 AM
#40
Have been patched.
No other instance is running.
HellDiverUK
hero member
Activity: 1246
Merit: 501
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 06:36:03 AM
#39
API filing to bind makes me think there's another instance of cgminer already running that's got hold of the USB miners.
loshia
legendary
Activity: 1610
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 06:18:30 AM
#38
Quote from: shortpocket on April 10, 2014, 02:53:59 AM
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
 (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 A:0  R:0  HW:0  WU:0.0/m
 Connected to "pool" diff 8 with stratum as user "user"
 Block: 9ffe96f9...  Diff:73.4K  Started: [09:52:35]  Best share: 0
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
 [2014-04-10 09:52:24] Started cgminer 4.2.2
 [2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
 [2014-04-10 09:52:25] No devices detected!
 [2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
 [2014-04-10 09:52:25] Probing for an alive pool
 [2014-04-10 09:52:26] Pool 0 difficulty changed to 8
 [2014-04-10 09:52:26] Network diff set to 73.5K
 [2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
 [2014-04-10 09:52:35] Network diff set to 73.4K
 [2014-04-10 09:52:35] Stratum from pool 0 detected new block



Did you patched and recompiled cgminer?
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:53:59 AM
#37
Quote
cgminer version 4.2.2 - Started: [2014-04-10 09:52:26]
--------------------------------------------------------------------------------
 (5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
 A:0  R:0  HW:0  WU:0.0/m
 Connected to "pool" diff 8 with stratum as user "user"
 Block: 9ffe96f9...  Diff:73.4K  Started: [09:52:35]  Best share: 0
--------------------------------------------------------------------------------
 SB management [P]ool management ettings [D]isplay options [Q]uit
--------------------------------------------------------------------------------
 [2014-04-10 09:52:24] Started cgminer 4.2.2
 [2014-04-10 09:52:24] Loaded configuration file /root/.cgminer/cgminer.conf
 [2014-04-10 09:52:25] No devices detected!
 [2014-04-10 09:52:25] Waiting for USB hotplug devices or press q to quit
 [2014-04-10 09:52:25] Probing for an alive pool
 [2014-04-10 09:52:26] Pool 0 difficulty changed to 8
 [2014-04-10 09:52:26] Network diff set to 73.5K
 [2014-04-10 09:52:31] API bind to port 4028 failed - trying again in 30sec
 [2014-04-10 09:52:35] Network diff set to 73.4K
 [2014-04-10 09:52:35] Stratum from pool 0 detected new block



Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:45:08 AM
#36
Quote from: shortpocket on April 10, 2014, 02:43:28 AM
i tried to delete it by right-clicking and move to trash since i dont know that many commands

sudo rm -rf /home/b/.cgminer/cgminer.conf
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:43:28 AM
#35
i tried to delete it by right-clicking and move to trash since i dont know that many commands
Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:31:57 AM
#34
Quote from: shortpocket on April 10, 2014, 02:26:35 AM
sudo ./cgminer?

i did that.


i mean add sudo when deleting conf file. You don't need to delete cgminer folder since conf located in other location.
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:26:35 AM
#33
sudo ./cgminer?

i did that.
Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:18:59 AM
#32
Quote from: shortpocket on April 10, 2014, 02:04:31 AM
i removed the cgminer-4.2.2 folder and started all over with this

then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)

Quote
[2014-04-10 08:59:39] Started cgminer 4.2.2
 [2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
 [2014-04-10 08:59:40] No devices detected!
 [2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
 [2014-04-10 08:59:40] Probing for an alive pool
 [2014-04-10 08:59:40] Pool 0 difficulty changed to 8
 [2014-04-10 08:59:41] Network diff set to 73.4K
 [2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec

add sudo on your command
shortpocket
newbie
Activity: 38
Merit: 0
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 02:04:31 AM
#31
i removed the cgminer-4.2.2 folder and started all over with this

Quote
Latest patch from technobit still for cgminer-4.2.2
Code:

1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make


Add setting to cgminer.conf
Code:

sudo nano /home/"user"/.cgminer/cgminer.conf


Code:

{
"pools" : [
        {
                "url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
                "user" : "user",
                "pass" : "123"
        }
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}


Okay i will try that zich...

then i started up cgminer ....
(now there is 2 cgminer.conf files one with "pool" on the image and one with "..." and i can not delete any of them)

Quote
[2014-04-10 08:59:39] Started cgminer 4.2.2
 [2014-04-10 08:59:39] Loaded configuration file /root/.cgminer/cgminer.conf
 [2014-04-10 08:59:40] No devices detected!
 [2014-04-10 08:59:40] Waiting for USB hotplug devices or press q to quit
 [2014-04-10 08:59:40] Probing for an alive pool
 [2014-04-10 08:59:40] Pool 0 difficulty changed to 8
 [2014-04-10 08:59:41] Network diff set to 73.4K
 [2014-04-10 08:59:46] API bind to port 4028 failed - trying again in 30sec
Zich
legendary
Activity: 1190
Merit: 1000
Re: Technobit HEX8A1 130GH/s Coincraft A1 based miner reviewed
April 10, 2014, 12:48:00 AM
#30
Quote from: shortpocket on April 10, 2014, 12:29:59 AM
conf file

Quote
{
"pools" : [
        {
                "url" : "url",
                "user" : "user",
                "pass" : "pass"
        }
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1000",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}

I did't see anything wrong with the conf. So you need to delete existing conf file & ask cgminer to generate new conf file.
Pages:
Bitcoin Forum>Bitcoin>Mining>Hardware
Jump to: