Payment deadline has passed, and surprisingly 18 units remain unpaid.
Looks like people where biding without having the cash ready. :-(
How did you compile that number?
Did you go through all the payment addresses?
Topic: The 3rd Round Auction for the AntMiner S1 Dual Blades, 120 units, 24 hours - page 8. (Read 34304 times)
December 04, 2013, 09:03:17 PM
Looks like people where biding without having the cash ready. :-(
How did you compile that number?
Did you go through all the payment addresses?
December 04, 2013, 08:55:50 PM
Payment deadline has passed, and surprisingly 18 units remain unpaid.
December 04, 2013, 08:43:53 PM
I'm thinking to use a Seasonic G-450.
Its 450W, single rail with 37A (444W).
Will that be enough for 1 unit?
Its 450W, single rail with 37A (444W).
Will that be enough for 1 unit?
December 04, 2013, 08:33:52 PM
Oh right, it's an Auction thread - I can't edit the post 
Well the 2nd one includes the comment that I'm running at 180GHs - that's the only change.
Well the 2nd one includes the comment that I'm running at 180GHs - that's the only change.
December 04, 2013, 08:32:37 PM
In the specs I see 360W, Sushi recommends 450W and Dogie even 800W for a S1 double baldes.
What PSU are the current owners using?
OCZ 1250 (13A+14A) x 12V on the power connectors = 324W (180GH/s)What PSU are the current owners using?
... it's single rail rated 104A
Note that I have it setup so that 3 Sata cables are powering it with butchered molex extenders.
2 are taking half of each side
1 is taking the other half of each side - so twice as much current as the other 2.
That 1 does get warm - but not hot - the other 2 don't get hot.
This is due to the fact that a single 12V wire pair is in each Sata PSU cable.
The PCIe cables have multiple wire pairs that can be connected to the power connection thus the cables in the PCIe cable will be sharing the current and thus they wont get hot at all (I've bought some BitFenix PCIe extension cables to butcher when I get time - I've currently just butchered molex extension cables so there are 3 pairs going to each side)
Also note that before, I used a cheap 950W PSU that's only rated 34A on each cable.
The cables heated up a lot and also it ran 20A each side - so was total 480W
So basically the quality of your PSU is a major deal with this.
December 04, 2013, 08:32:17 PM
In the specs I see 360W, Sushi recommends 450W and Dogie even 800W for a S1 double baldes.
What PSU are the current owners using?
OCZ 1250 (13A+14A) x 12V on the power connectors = 324WWhat PSU are the current owners using?
... it's single rail rated 104A
Note that I have it setup so that 3 Sata cables are powering it with butchered molex extenders.
2 are taking half of each side
1 is taking the other half of each side - so twice as much current as the other 2.
That 1 does get warm - but not hot - the other 2 don't get hot.
This is due to the fact that a single 12V wire pair is in each Sata PSU cable.
The PCIe cables have multiple wire pairs that can be connected to the power connection thus the cables in the PCIe cable will be sharing the current and thus they wont get hot at all (I've bought some BitFenix PCIe extension cables to butcher when I get time - I've currently just butchered molex extension cables so there are 3 pairs going to each side)
Also note that before, I used a cheap 950W PSU that's only rated 34A on each cable.
The cables heated up a lot and also it ran 20A each side - so was total 480W
So basically the quality of your PSU is a major deal with this.
December 04, 2013, 08:22:47 PM
In the specs I see 360W, Sushi recommends 450W and Dogie even 800W for a S1 double baldes.
What PSU are the current owners using?
What PSU are the current owners using?
I am using an OCZ 1000. It pulls 360W on the killawatt, I measured it today.
Count on more if you overclock. maybe close to 500W dont know yet, not sure if I will try.
December 04, 2013, 08:20:26 PM
In the specs I see 360W, Sushi recommends 450W and Dogie even 800W for a S1 double baldes.
What PSU are the current owners using?
What PSU are the current owners using?
I am using an OCZ 1000. It pulls 360W on the killawatt, I measured it today.
December 04, 2013, 08:09:15 PM
In the specs I see 360W, Sushi recommends 450W and Dogie even 800W for a S1 double baldes.
What PSU are the current owners using?
What PSU are the current owners using?
December 04, 2013, 08:02:04 PM
Paid 52.84875 BTC to address provided by Bitmain: 1Ess6E7WZPaRWU57ui78EJ84sVGCP5qALV
Transaction ID: 39d10c32c77c75dba748587e72b8bced896857e53eabd6f1cf166f35a271f9f9
https://blockchain.info/address/1Ess6E7WZPaRWU57ui78EJ84sVGCP5qALV
Transaction ID: 39d10c32c77c75dba748587e72b8bced896857e53eabd6f1cf166f35a271f9f9
https://blockchain.info/address/1Ess6E7WZPaRWU57ui78EJ84sVGCP5qALV
December 04, 2013, 07:44:14 PM
AntMiner S1 Dual Blades Spec
Hash rate: 180 GH/s
Power consumption: About 360 W on wall
Power supply: 3 +12V DC input
Power efficiency: About 2 W/GH/s on wall
Size: 135 mm x 155 mm x 300 mm (Dual blades assembled, with fans or mounting bracket),
Network connection: WIFI / Ethernet Cable
Cooling: 12cm PWM fans and customized heat sink, expected to be very quiet at 25℃ ambient and should be able to test up to 35~40℃ ambient.
Kindly reminder: you need prepare your own 12V power supply.
Sushi’s setup guide: https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
Dogie’s setup guide: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s1-setup-hd-355387
The specs in the OP states "12cm PWM fans" but in both Dogie's and Sushi's setup guides the unit has only 1 fan.
Does anybody know if these units ship with 1 fan or 2 fans?
1 fan only. although adding a second might be a good idea to improve the airflow
December 04, 2013, 07:39:36 PM
AntMiner S1 Dual Blades Spec
Hash rate: 180 GH/s
Power consumption: About 360 W on wall
Power supply: 3 +12V DC input
Power efficiency: About 2 W/GH/s on wall
Size: 135 mm x 155 mm x 300 mm (Dual blades assembled, with fans or mounting bracket),
Network connection: WIFI / Ethernet Cable
Cooling: 12cm PWM fans and customized heat sink, expected to be very quiet at 25℃ ambient and should be able to test up to 35~40℃ ambient.
Kindly reminder: you need prepare your own 12V power supply.
Sushi’s setup guide: https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
Dogie’s setup guide: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s1-setup-hd-355387
The specs in the OP states "12cm PWM fans" but in both Dogie's and Sushi's setup guides the unit has only 1 fan.
Does anybody know if these units ship with 1 fan or 2 fans?
December 04, 2013, 07:34:56 PM
I submitted my address twice since the first time I didn't notice the lack of a country field. It (United States) is in the notes field in my second submission.
December 04, 2013, 07:33:10 PM
BITMAIN: When you start processing shipments today, could you post here and let us know if you didn't get sufficient info or payment from someone?
December 04, 2013, 07:21:25 PM
paid
2bef169b8dc5af985a5be0dcecb9ddc9c66fd34be10b9ca14409ab1b1be27a54
2bef169b8dc5af985a5be0dcecb9ddc9c66fd34be10b9ca14409ab1b1be27a54
December 04, 2013, 05:53:12 PM
paid!
transactions:
https://blockchain.info/tx/09f2208ed07f3c4f8f82cc69f67c48a5d7ad938b946ee7f9cf6ad97fe178e2c1
and
https://blockchain.info/tx/d6b7d248e70075097b6c6ac4b992d0f106f39bea7bb326d55bdfacf6fc39cec2
I did not know 0.001 would be deducted, so I sent the rest to bring the total paid to 8.5 btc.
transactions:
https://blockchain.info/tx/09f2208ed07f3c4f8f82cc69f67c48a5d7ad938b946ee7f9cf6ad97fe178e2c1
and
https://blockchain.info/tx/d6b7d248e70075097b6c6ac4b992d0f106f39bea7bb326d55bdfacf6fc39cec2
I did not know 0.001 would be deducted, so I sent the rest to bring the total paid to 8.5 btc.
December 04, 2013, 05:51:38 PM
I bought 1 unit already - shown here -- lubah
https://bitcointalksearch.org/topic/shipped-dec-3-group-buy-bitmain-antminer-s1-180-ghs-50-units-353650
- why isn't the coupon good for me?
Coupon
All previous auction winners will have a 0.1BTC coupon per unit bought, and each unit can use only one coupon. for example, a forum member who has bought 3 units from us, and he bid 5 units in The 3rd Round Auction, he can save 0.3BTC in the final amount. If the same forum member only bids 2 units in The 3rd Round Auction, he saves only 0.2BTC.
It was group buy not an auction https://bitcointalksearch.org/topic/shipped-dec-3-group-buy-bitmain-antminer-s1-180-ghs-50-units-353650
- why isn't the coupon good for me?
Coupon
All previous auction winners will have a 0.1BTC coupon per unit bought, and each unit can use only one coupon. for example, a forum member who has bought 3 units from us, and he bid 5 units in The 3rd Round Auction, he can save 0.3BTC in the final amount. If the same forum member only bids 2 units in The 3rd Round Auction, he saves only 0.2BTC.
December 04, 2013, 04:48:29 PM
I bought 1 unit already - shown here -- lubah
https://bitcointalksearch.org/topic/shipped-dec-3-group-buy-bitmain-antminer-s1-180-ghs-50-units-353650
- why isn't the coupon good for me?
Coupon
All previous auction winners will have a 0.1BTC coupon per unit bought, and each unit can use only one coupon. for example, a forum member who has bought 3 units from us, and he bid 5 units in The 3rd Round Auction, he can save 0.3BTC in the final amount. If the same forum member only bids 2 units in The 3rd Round Auction, he saves only 0.2BTC.
https://bitcointalksearch.org/topic/shipped-dec-3-group-buy-bitmain-antminer-s1-180-ghs-50-units-353650
- why isn't the coupon good for me?
Coupon
All previous auction winners will have a 0.1BTC coupon per unit bought, and each unit can use only one coupon. for example, a forum member who has bought 3 units from us, and he bid 5 units in The 3rd Round Auction, he can save 0.3BTC in the final amount. If the same forum member only bids 2 units in The 3rd Round Auction, he saves only 0.2BTC.
December 04, 2013, 04:40:00 PM
I will have to cancel the order. Couldn't send money trough bank accout to buy additional btc's from local dealer, and my friends won't borrow me...
Give elasticband this unit and problem solved. He deserves it.
Arorts had order for 10.
Move me up, I'm still down for the 2.
December 04, 2013, 04:36:29 PM
Thanka for the thought. Will discuss it with bitmain.
Jump to: