The big VTC Vertcoin settings thread - page 17.

luffy

hero member

Activity: 607

Merit: 500

Quote from: irlandescoin on February 19, 2014, 04:40:17 AM

hy guys i have amd r9 280x saphire vapor.

i cannot connect my vertminer

@echo off
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
del *.bin
vertminer -o stratum+tcp://panda.united-miners.com:3311 -u user.coin -p pass -I 13 -g 1 -w 256 --thread-concurrency 15232 --auto-fan --temp-target 95

i get this everytime and i cant connect
error -4: enqueueing kernel onto command queue

i think you need to lower tc or use -g2.
high -I and tc needs also alot of ddr3 ram (8gb+)
also if i change the mining coin from blake or max, sometimes i need a restart!
vert and scrypt mining is very hard for gpu

w0lf0.

hero member

Activity: 1050

Merit: 513

Quote from: kkali1172 on February 19, 2014, 09:44:13 AM

Quote from: w0lf0. on February 19, 2014, 08:40:50 AM

with intensity over 12 i reiceve only hw errors Undecided

I have the same problem, Huh

I can see people using the option --scrypt-vert? Huh

I can't see it with vertminer --help, only see the option --scrypt or --nscrypt...

anyone can help us Huh

kkali1172

newbie

Activity: 26

Merit: 0

Quote from: w0lf0. on February 19, 2014, 08:40:50 AM

with intensity over 12 i reiceve only hw errors Undecided

I have the same problem, Huh

I can see people using the option --scrypt-vert? Huh

I can't see it with vertminer --help, only see the option --scrypt or --nscrypt...

w0lf0.

hero member

Activity: 1050

Merit: 513

with intensity over 12 i reiceve only hw errors Undecided

shango

sr. member

Activity: 248

Merit: 250

Quote from: Forexperiments on February 19, 2014, 03:28:16 AM

intensity 20 with no HW errors?? Huh

Yes, it was hashing like crazy but not stable enough, froze after about 7-8 hours.
Now down to I 19, a bit smaller hashrate but so fur 6 hours stable.

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: kkali1172 on February 19, 2014, 05:18:36 AM

Hello,
I have Ubuntu 13.10 64 bits, and vertminer 0.5.4pre... downloaded from https://github.com/Bufius/vertminer-gpu‎...
Mobo SABERTOOTH 990FX R2.0 , processor am3+, ram 16Go ddr3....
I have 4x7970 saphire radeon, and they pull 2500 kh/s with cgminer --scrypt (DOGE, Litecoin...)

Now with vertminer, I have 100% HW beyond I 12...
I can only pull 750 kh/s , that's 190kh/s per 7970, it is ridiculous....

My best setting is : ./vertminer --nscrypt -o stratum -u username -p pwd -I 12 --thread-concurrency 4096 --shaders 2048 -w 256

May I have to test the cgminer modified mod https://github.com/Bufius/cgminer, is it better?

I have the same problem with 0.5.3. If I use TC over 4096, it will create a 4032 bin file, instead of 8192.

kkali1172

newbie

Activity: 26

Merit: 0

Hello,
I have Ubuntu 13.10 64 bits, and vertminer 0.5.4pre... downloaded from https://github.com/Bufius/vertminer-gpu‎...
Mobo SABERTOOTH 990FX R2.0 , processor am3+, ram 16Go ddr3....
I have 4x7970 saphire radeon, and they pull 2500 kh/s with cgminer --scrypt (DOGE, Litecoin...)

Now with vertminer, I have 100% HW beyond I 12...
I can only pull 750 kh/s, that's 190kh/s per 7970, it is ridiculous....

My best setting is : ./vertminer --nscrypt -o stratum -u username -p pwd -I 12 --thread-concurrency 4096 --shaders 2048 -w 256

May I have to test the cgminer modified mod https://github.com/Bufius/cgminer, is it better?

irlandescoin

hero member

Activity: 567

Merit: 502

Hey yo let's go

hy guys i have amd r9 280x saphire vapor.

i cannot connect my vertminer

@echo off
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
del *.bin
vertminer -o stratum+tcp://panda.united-miners.com:3311 -u user.coin -p pass -I 13 -g 1 -w 256 --thread-concurrency 15232 --auto-fan --temp-target 95

i get this everytime and i cant connect
error -4: enqueueing kernel onto command queue

Forexperiments

sr. member

Activity: 259

Merit: 250

intensity 20 with no HW errors?? Huh

shango

sr. member

Activity: 248

Merit: 250

Update for the 2x r9 290x setup :
I had to reduce the intensity as the system hanged after a few hours.
I tried with -I 20 and ncreased the TC to but than it hanged again after 7-8 hours.

Now i run -I 19 to look for stability but the hashrate has dropped to 437 per card. This is the current config :

Code:

-I 19 -w 512 --thread-concurrency 27000,27000 --gpu-engine 1000,1000 --gpu-memclock 1400,1400 --auto-fan -g 1 --lookup-gap 2,2 --gpu-threads 1

I will continue testing today. Any suggestions are welcome.

spikers

member

Activity: 79

Merit: 10

MINING POOL VTCWEB.POOLZ.NET HAS MOVED TO A DDoS PROTECTED DATACENTER!!!
Powerful 16-core 32 Gb physical (not virtual) servers
Gigabit Connection and SSD drives
High Efficiency
STABLE AND DDoS PROTECTED
MONTREAL DDOS PROTECTED DATACENTER

OmarG

full member

Activity: 210

Merit: 100

Quote from: Ambros on February 18, 2014, 06:27:37 AM

I have a gigabyte r9 280x oc bf4 with this conf
"intensity" : "13",
"thread-concurrency" : "8193",
"gpu-powertune" : "20",
"gpu-engine" : "1055",
"gpu-memclock" : "1500",
"worksize" : "256",
"gpu-threads" : "1",
"gpu-powertune" : "20"
I copied this from this topic , i have 300Khash but a lot of hardware errors , a WU of around 40 , so i can't mine anything ..
Someone has some advice ?

Switch to gpu threads 2 and thread concurrency 8191. Also 1025/1500 clocks. I'm getting 345khash from this

Timmieman

full member

Activity: 136

Merit: 100

Has anyone been able to mine with a 6+ GPU rig?
I`ve been getting approx 65-70% of what I should get since I cant get Intensity higher than 12.
Currently i`m mining on windows 8 since I only have 8GB RAM.
Has anyone tried with linux?
Does it also require a large amount of RAM?

Cheers,

shango

sr. member

Activity: 248

Merit: 250

I managed to pull ~ 460 khs each on a pair of r9 290x
I am pushing for 500 but i cannot make it stable from here onwards.

Here's the config :

Code:

-I 21 -w 256 --thread-concurrency 22528,22528 --gpu-engine 1000,1000 --gpu-memclock 1500,1500 --auto-fan -g 1 --lookup-gap 2,2 --gpu-threads 1

this gives me about 950kh/s from both cards average and WU of 800-850

ZERO Rejects!!! Cool

Ambros

hero member

Activity: 653

Merit: 500

I have a gigabyte r9 280x oc bf4 with this conf
"intensity" : "13",
"thread-concurrency" : "8193",
"gpu-powertune" : "20",
"gpu-engine" : "1055",
"gpu-memclock" : "1500",
"worksize" : "256",
"gpu-threads" : "1",
"gpu-powertune" : "20"
I copied this from this topic , i have 300Khash but a lot of hardware errors , a WU of around 40 , so i can't mine anything ..
Someone has some advice ?

Jord9988

newbie

Activity: 1

Merit: 0

I have two Sapphire R9 270X OC DUAL-X but soon to be five once I get my frame, I am using some settings off this forum and I am hashing at about 450kh/s but I am not getting any accepts just thousands of rejects.

Here are my settings.

del scrypt*.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://stratum.kilovolt.co.uk:3333 -u user -p pass -g 1 -w 256 -I 19 --thread-concurrency 15353 --gpu-fan auto --temp-target 80 --temp-overheat 90 --temp-cutoff 95 --lookup-gap 2 --gpu-engine 1131 --gpu-memclock 1500 --gpu-powertune 20 --no-submit-stale

If anyone could point me in the right direction to get accepts again that would be great.

Thanks,
Jord

mehdi343

newbie

Activity: 29

Merit: 0

I have Quadro 4000 with 48 G Ram.

can you give me the configuration for this card?

I couldn't setting that. I just got 1 k by my own setting . How can i find the setting data?

Thanks so much.

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: Slipknot79 on February 15, 2014, 04:23:44 PM

Code:

{
"pools" : [
	{
		"name" : "http://q30.qhor.net:9171",
		"url" : "http://q30.qhor.net:9171",
		"user" : "",
		"pass" : "",
		"pool-priority" : "0"
	}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"expiry" : "1",
"gpu-threads" : "2",
"gpu-engine" : "1000,1000",
"gpu-memclock" : "1500,1500",
"intensity" : "13,13",
"worksize" : "256,256",
"lookup-gap" : "2",
"thread-concurrency" : "8191,8191"
}

Thats the created bin-file: scrypt140202Tahitiglg2tc4032w256l4.bin
Vertminer doesnt apply any of these conf-settings, even not if i type this in a command line. Why?

Quote

vertminer.exe --expiry 1 --gpu-threads 2 --gpu-engine 1000,1000 --gpu-memclock 1500,1500 --gpu-vddc 1.094,1.094 --intensity 13,13 --worksize 256,256 --lookup-gap 2,2 --thread-concurrency 8191,8191 -o http://q30.qhor.net:9171 -u walletaddress -p any

No problems on another computer, why?

I have the same issue. One rig is working fine, the other created 4032 bin file.

WutriCoin

full member

Activity: 224

Merit: 100

Azure Vertcoin Pool - DDOS reisistant P2Pool Node

http://cryptopool.cloudapp.net:9171/

No registration - No minimal payout!

To connect to this P2Pool node simply point your miner at:

URL: stratum+tcp://cryptopool.cloudapp.net:9171
Username: Your vertcoin address
Password: Anything

Fast facts about P2Pool

1. P2Pool nodes are all part of one single, big, distributed pool
2. When any p2pool worker on any node finds a block, everyone on all the nodes gets paid their share
3. There is no pool wallet, and hence no payout threshold. Payments go directly to your wallet
4. The distributed nature of p2pool resists DDoS attacks

cgminer.exe --scrypt -o stratum+tcp://cryptopool.cloudapp.net:9171 -u VbNPoxNeiNg6Bj9RwjjS4GazDbKLgUqNDP -p X

hilgi

sr. member

Activity: 280

Merit: 250

Quote from: tylerderden on February 14, 2014, 08:40:59 PM

whats up everybody. I have a saphire 7870 and i'm getting 130khs, when i fired it up it was around 170. here my bat file:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

cgminer --scrypt -I 12 -g 2 -w 256 --thread-concurrency 4000 --auto-fan --temp-target 70 --temp-overheat 85 --gpu-engine 925 --gpu-memclock 1325 -o stratum+tcp://vertcoinheavyindustries.com:4444 -u X -p X

anybody have one of these finicky bastages? any higher clocks and the rig freezes up.

Are you mining VTC or Panda?

Topic: The big VTC Vertcoin settings thread - page 17. (Read 264260 times)