after the block 54000, the blocks finder bonus will be halved. (0.5 -> 0.25 VIA).
https://twitter.com/TBF_POOL
Topic: The Blocks Factory - Multicoin pool - page 65. (Read 198355 times)
There is a fork on VIACOIN so I redirected the Viacoin the WDC pool. (there are now mining at http://wdc.theblocksfactory.com/ )
So you don't loose your shares.
I will reopen the Viacoin pool when the situation will be fixed.
So you don't loose your shares.
I will reopen the Viacoin pool when the situation will be fixed.
VIA pool is up again
There is a fork on VIACOIN so I redirected the Viacoin the WDC pool. (there are now mining at http://wdc.theblocksfactory.com/ )
So you don't loose your shares.
I will reopen the Viacoin pool when the situation will be fixed.
So you don't loose your shares.
I will reopen the Viacoin pool when the situation will be fixed.
any idea what is going on with FTC?
Blocks at 7 hours...
not enough miner on the pool Blocks at 7 hours...
any idea what is going on with FTC?
Blocks at 7 hours...
Blocks at 7 hours...
i'm mining HBN so i think switching is not the issue.
Ok, I was thinking WDC because it's a common problem with WDC.But, with HBN you should not get this kind of reject.
The pool average is 2.04 %.
You should try set _diff512 or 256 in your miner configuration (username.workername_diffxxx)
i'm mining HBN so i think switching is not the issue.
hi,
i get a high rejected rate from time to time, any idea why?
is one asic (2 blades 15MHs) , diff is set at 1024 and atm rejected rate is 5.23MHs.
in the beginning the rejected rat was under 200 khs but now is sky high.
Ty!
When autoswitching pool start to mine WDC when diff drop, the block time goes really low (5-10sec) so the reject rate go very high.i get a high rejected rate from time to time, any idea why?
is one asic (2 blades 15MHs) , diff is set at 1024 and atm rejected rate is 5.23MHs.
in the beginning the rejected rat was under 200 khs but now is sky high.
Ty!
But 33 % reject is very high.
Try adding _diff512 at the end of your miner name (in cgminer/bfgminer) to lower the diff
hi,
i get a high rejected rate from time to time, any idea why?
is one asic (2 blades 15MHs) , diff is set at 1024 and atm rejected rate is 5.23MHs.
in the beginning the rejected rat was under 200 khs but now is sky high.
Ty!
i get a high rejected rate from time to time, any idea why?
is one asic (2 blades 15MHs) , diff is set at 1024 and atm rejected rate is 5.23MHs.
in the beginning the rejected rat was under 200 khs but now is sky high.
Ty!
whats up with the VTC pool? should i just give up on this thing? 
Hello!
Why I cannot withdraw my CGB coins?
It should work now, the CGB deamon was having some difficulty to process a "big" transactions.Why I cannot withdraw my CGB coins?
I'm recevied CGB! Good Luck you pool!
Hello!
Why I cannot withdraw my CGB coins?
It should work now, the CGB deamon was having some difficulty to process a "big" transactions. Why I cannot withdraw my CGB coins?
Hello!
Why I cannot withdraw my CGB coins?
Why I cannot withdraw my CGB coins?
WDC : block reward is now paid after only 20 confirms.
WDC : The link to the block explorer(&transaction) has been updated to http://www.worldcoinexplorer.com/
I have a gridseed blade too.
I'am currently making some longrun test to see what's best diff for the blade.
I'am currently making some longrun test to see what's best diff for the blade.
Yep 3 blades on a Rasberry PI.
Yesterday my hashrate cut in half.
Have to trouble shoot them.
Tweeking the diff Rate was a thought I had while trying to figure out my issue.
Ps. I have a box of 100 pcie connectors with molex on ebay for 45 bucks too much?
Yesterday my hashrate cut in half.
Have to trouble shoot them.
Tweeking the diff Rate was a thought I had while trying to figure out my issue.
Ps. I have a box of 100 pcie connectors with molex on ebay for 45 bucks too much?
What should I set my difficulty rate with a hashrate of 15MS/s miner?
Does the server automatically adjust the rate?
The pool will automatically adjust the difficulty Does the server automatically adjust the rate?
unless you connect with Usename.workername_diff256 (256 is an example)
so you can tune the difficulty manualy.
For 15Mh/s miner, it depend on what device it is.
if it's a single device capable of 15Mh/s (higher diff needed here)
or if it's 3 gridseed blades(3x5Mh/s), (lower diff needed here)
you will not set the same difficulty.
it also depend on the block time of the coin.
if you put 128 diff for WDC (30sec), you will put 256 for FTC (60sec).
For WDC and gridseed blade, I think the best result will be 256.
The best way to set the difficulty manualy is try different values and choose the best.
What should I set my difficulty rate with a hashrate of 15MS/s miner?
Does the server automatically adjust the rate?
Does the server automatically adjust the rate?
Jump to: