Topic: The Blocks Factory - Multicoin pool - page 61. (Read 198209 times)
I spent a week messing with diff settings and it makes almost no difference to hash stability and reported speeds.
Been trying 512 diff but its still not up to full potential. Any ideas?
Something odd going on with the XCN pool. I was mining with 1GH and normally got stable around 160MH/s. I wanted to use your pool to try to distribute the hash for XCN. The difficulty of my workers is fluctuating a lot so I'm getting a bit less hash reported in my miners but way lower on the pool side. When I get 30-31MH/s reported by my miner I get 23-24MH/s reported on the pool side.
What might be the reason for this?
Yeah I figured that one out (RTFM case). Started with 2048 and it lowered even more. Trying 1024 now but its still quite low at the pool. Going to try 512 now to see if it does anything.
Something odd going on with the XCN pool. I was mining with 1GH and normally got stable around 160MH/s. I wanted to use your pool to try to distribute the hash for XCN. The difficulty of my workers is fluctuating a lot so I'm getting a bit less hash reported in my miners but way lower on the pool side. When I get 30-31MH/s reported by my miner I get 23-24MH/s reported on the pool side.
What might be the reason for this?
Something odd going on with the XCN pool. I was mining with 1GH and normally got stable around 160MH/s. I wanted to use your pool to try to distribute the hash for XCN. The difficulty of my workers is fluctuating a lot so I'm getting a bit less hash reported in my miners but way lower on the pool side. When I get 30-31MH/s reported by my miner I get 23-24MH/s reported on the pool side.
What might be the reason for this?
All good 
Still new so I'm glued to the stats.
While I'm here something else I noticed. On the workers page for XCN it says the minimum diff is 4 but the stratum uses minimum 64. Also unless I manually input the number of devices for a worker it defaults to 4.
Still new so I'm glued to the stats.
While I'm here something else I noticed. On the workers page for XCN it says the minimum diff is 4 but the stratum uses minimum 64. Also unless I manually input the number of devices for a worker it defaults to 4.
Cryptonite stats aren't updating either.
cryptonited crashed on the frontend but not on the stratum, so no time lost.
Cryptonite stats aren't updating either.
Is the PXC pool server down???
yep, just woke up and the pool was down. 
Is the PXC pool server down???
If you're mining on my P2Pools, please use a PXC address for your workers. Don't mine to an exchange directly.
Is the PXC pool server down???
Do you plan to add also merged mining with Doge coin with HBN?
thank you!
thank you!
Are you using different worker logins for each pc etc?
hi
i try to mine with 2 different computer (same configuration, same connection)
one is connected normaly
Second is "waiting from work of pool"
DGB myr-g pool.
Any help
thx alot.
i try to mine with 2 different computer (same configuration, same connection)
one is connected normaly
Second is "waiting from work of pool"
DGB myr-g pool.
Any help
thx alot.
qubit : Link to the M8M AMD gpu miner added : http://dgb-qubit.theblocksfactory.com/gettingstarted
this miner is faster than the sgminer implementation !
this miner is faster than the sgminer implementation !
cryptsy deposit is too fast ...Said No One Ever
dgb pool fee has been set @1.5%
Hi There
Im trying to mine DGB using qubit. I have about 800 cpu cores trying to do some work, but I am only getting about 200KH of work registered with my worker?
Am I doing something wrong? normaly I use p2p pools.
Don't know, Others miner use GPU. I think Qubit CPU mining is dead.Im trying to mine DGB using qubit. I have about 800 cpu cores trying to do some work, but I am only getting about 200KH of work registered with my worker?
Am I doing something wrong? normaly I use p2p pools.
Since a basic R280x will get 5 MH/s
You can use that on the command line : -u Lawzt.${HOSTNAME} (if using linux)
to have different worker name on each machine
Hi There
Im trying to mine DGB using qubit. I have about 800 cpu cores trying to do some work, but I am only getting about 200KH of work registered with my worker?
Am I doing something wrong? normaly I use p2p pools.
Don't know, Others miner use GPU. I think Qubit CPU mining is dead.Im trying to mine DGB using qubit. I have about 800 cpu cores trying to do some work, but I am only getting about 200KH of work registered with my worker?
Am I doing something wrong? normaly I use p2p pools.
Since a basic R280x will get 5 MH/s
I have tweaked the vardiff on the dgb skein pool, the reject should be < 2 %
Jump to: