The Blocks Factory - Multicoin pool - page 77.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: Tranz on December 10, 2013, 05:43:12 PM

Hi lucazane I just want to make sure we use caution with the HBN pool. I realize it is not your fault, but you are now controlling a very large % of the hash rate. So please be sure you are getting sync checkpoints and relaying to as many peers as possible, just so we don't get into a fork situation. Everything is working great, just keeping everything as smooth as possible.

Thanks!

maxconnection is 1000
Now 20 peers.

But I don't now how to check if I have the last check point

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: ergou on December 10, 2013, 10:01:36 PM

for WDC pool

my rejection rate around 8%.

how about you guys?

less than 0.5% but I am at 15 ms from the server

ergou

newbie

Activity: 59

Merit: 0

for WDC pool

my rejection rate around 8%.

how about you guys?

Tranz

legendary

Activity: 1540

Merit: 1060

May the force bit with you.

Hi lucazane I just want to make sure we use caution with the HBN pool. I realize it is not your fault, but you are now controlling a very large % of the hash rate. So please be sure you are getting sync checkpoints and relaying to as many peers as possible, just so we don't get into a fork situation. Everything is working great, just keeping everything as smooth as possible.

Thanks!

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: rallasnackbar on December 09, 2013, 02:20:33 PM

How come

Paid Shares
Your Valid:

isnt getting updated? Mine has bin stuck at the same number for 3 days, even thou i am getting paid.

yes it's normal.

rallasnackbar

full member

Activity: 196

Merit: 100

How come

Paid Shares
Your Valid:

isnt getting updated? Mine has bin stuck at the same number for 3 days, even thou i am getting paid.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: CryptoCoinSolutions on December 08, 2013, 11:57:13 PM

Quote from: lucazane on October 30, 2013, 01:25:58 AM

I use 4 7950 and the best settings so far are :
thread-conccurency 16384
intensity 20
gpu-thread 1

Are you still happy with the above settings for your 7950?

I have 3, Sapphire 7950 reference cards pointed at you, (the last edition of the 4L), and I'm going to try these settings and do some testing.

I'm in the U.S., so, that your server is abroad, I will have a higher rate of stales than most, but I want to get fewer stales at the max hashrate of course.

I have the --no-submit-stale in my command line for all three cards.

Are you overclocking?

Mine are sapphire dual-x
yes,
my settings are :

core/mem/mV/hashrate
2x 7950 1045/1500/1031/620
1x 7950 1045/1500/1087/640
1x 7950 1000/1500/1043/625

~800 watt at the wall

CryptoCoinSolutions

newbie

Activity: 58

Merit: 0

Quote from: lucazane on October 30, 2013, 01:25:58 AM

I use 4 7950 and the best settings so far are :
thread-conccurency 16384
intensity 20
gpu-thread 1

Are you still happy with the above settings for your 7950?

I have 3, Sapphire 7950 reference cards pointed at you, (the last edition of the 4L), and I'm going to try these settings and do some testing.

I'm in the U.S., so, that your server is abroad, I will have a higher rate of stales than most, but I want to get fewer stales at the max hashrate of course.

I have the --no-submit-stale in my command line for all three cards.

Are you overclocking?

toknormal

legendary

Activity: 3066

Merit: 1188

Quote from: lucazane on December 07, 2013, 09:13:56 AM

hashrate below a certain level just don't produce a share fast enough :
the miner produce shares for a particular block but if your miner is too slow, we are already at the next block and your miner didn't finished the first share and so the share doesn't count ( the share must be submited before we found the associated block)

Ok, I got a bit further. My miner is now reporting that it's connected and reports a hash rate of about 10 Mh/s. (I didn't realise I needed to drop back to version 3.7.2 to do SCRYPT mining).

Looking at the other hashrates on the pool, it seems reasonable (though at the slower end). But I'm still not registering any activity on the pools stats or on my dashboard. It's still on Zero.

I've had it running for over an hour now.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: toknormal on December 07, 2013, 09:10:40 AM

Quote from: lucazane on December 07, 2013, 08:07:00 AM

Your GPU is realy to slow to mine on the pool.
You should try a pool with lower diff or buy an ATI GPU like a 7950 or R280.

ok, thanks. Maybe hashrates below a certain level just don't register.

hashrate below a certain level just don't produce a share fast enough :
the miner produce shares for a particular block but if your miner is too slow, we are already at the next block and your miner didn't finished the first share and so the share doesn't count ( the share must be submited before we found the associated block)

lucazane

legendary

Activity: 1198

Merit: 1000

I would like to ask miner to add --no-submit-stale to their cgminer command line the next time you restart your miner

it's just to reduce network and server load

toknormal

legendary

Activity: 3066

Merit: 1188

Quote from: lucazane on December 07, 2013, 08:07:00 AM

Your GPU is realy to slow to mine on the pool.
You should try a pool with lower diff or buy an ATI GPU like a 7950 or R280.

ok, thanks. Maybe hashrates below a certain level just don't register.

lucazane

legendary

Activity: 1198

Merit: 1000

Because litecoin is :

5 times slower ==> less stales,less orphans
Diff change 1 time every 4 days so you don't have variation when looking at 24 hours profit comparing to a coin retargeting 20 times per fays

And if you want to now :
in the last 24h the average difficulty of mined block by us is : 34.73
average stale rate is 4 %
Orphan rate is : 2.24 %

And by the way, with 0 or 10 % in fee on coinwarz doesn't change anything on the WDC Coins column

On coinchoose, look profitablity % Adj Stale, you can see the difference between LTC and WDC

ungaro59

hero member

Activity: 679

Merit: 507

Quote from: lucazane on December 07, 2013, 06:51:31 AM

For all profitability questions :

Keep in mind that the calculators or the estimation on the stats page are the best possible estimation
it doesn't includes :

the difficulty retarget 20 times days
the drop of more than 1 ghs on the network after difficulty retarget due to multipool,coinmiddle ... switching to another currency ==> we spend more time at high diff than we spend at low diff
the shares lost due to the speed of the generated block (it drop to 20-25 sec per block when multipool and other friends join WDC)
Orphan blocks
... insert others think here

OK, but why the calculator is always perfectly correct with litecoinpool.org for example (1479Kh/s):

Coinarz (1479Kh/s) :

Difference is < 5%, not 20-25% it's huge !... Huh

So, when coinchoose says profitabiliy LTC +120%, we must read : 95-100% LTC ?

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: toknormal on December 07, 2013, 07:28:16 AM

Hi

Can someone help me out here ?

I've started mining (WDC) with theblocksfactory using cgminer and a .conf configuration file.

My miner seems to connect ok and I get regular messages like this:

**** Stratum from pool zero detected new block *****

But - my hash rate is always on zero !? (I mean absolute zero - not just a low amount)

Specs:
CPU: Intel Core 2 Dui @ 3.16 GHz
GPU: Nvidia GEForce GE 220

I've added the scrypt=true setting to the .conf file but can't think of what else to try.

Any ideas ?

Your GPU is realy to slow to mine on the pool.
You should try a pool with lower diff or buy an ATI GPU like a 7950 or R280.

toknormal

legendary

Activity: 3066

Merit: 1188

Hi

Can someone help me out here ?

I've started mining (WDC) with theblocksfactory using cgminer and a .conf configuration file.

My miner seems to connect ok and I get regular messages like this:

**** Stratum from pool zero detected new block *****

But - my hash rate is always on zero !? (I mean absolute zero - not just a low amount)

Specs:
CPU: Intel Core 2 Dui @ 3.16 GHz
GPU: Nvidia GEForce GE 220

I've added the scrypt=true setting to the .conf file but can't think of what else to try.

Any ideas ?

lucazane

legendary

Activity: 1198

Merit: 1000

For all profitability questions :

Keep in mind that the calculators or the estimation on the stats page are the best possible estimation
it doesn't includes :

the difficulty retarget 20 times days
the drop of more than 1 ghs on the network after difficulty retarget due to multipool,coinmiddle ... switching to another currency ==> we spend more time at high diff than we spend at low diff
the shares lost due to the speed of the generated block (it drop to 20-25 sec per block when multipool and other friends join WDC)
Orphan blocks
... insert others think here

MinerMike

member

Activity: 105

Merit: 10

Any chance of adding a globalcoin pool? There's 100+Mh/s on the network at the moment and no decent pool around other than p2pool.

ungaro59

hero member

Activity: 679

Merit: 507

Hello,

Please can you explain why with coinarz calculator (http://www.coinwarz.com/), my daily Expected Earnings are 12 WDC with my hashrate : ~360 Kh/s (max=390 and min=340) difficulty : ~34, 2.75% fee.
But my REALLY earnings are : 9.4 by day.. estimate calculation after 6 hours of mining. (-22% !)

My connection is good, no problem.

Why? What is the problem in the calculs?? Where is the problem?? How to calculate clearly the good earning? (max 5% error).

I do not even talk about the calculation of the pool, it is totally exaggerated (14 WDC !)

17 WDC, Lol ?

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: berttie on December 05, 2013, 12:41:45 PM

HI lucazane

Thanks for the reply ... and the details ... however the coins are not showing up in my wallet ?

ROb

Do you have the latest worldcoin wallet ? http://www.worldcoinfoundation.org/
you can go to the debug windows of worldcoin-qt -> console and type gettransaction 7916f8325c42ecb3ad89ff84fe5ec821ce420b7af51ef39459c5a90792642eb6

you will have more info

Topic: The Blocks Factory - Multicoin pool - page 77. (Read 198355 times)