Topic: The Habanero - 650GH/s - OOS - page 18. (Read 96043 times)

Quote from: MrTeal on June 24, 2014, 01:58:58 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I used the shorter set of screws that came with the Habaneros, combined with the little black plastic spacers from the Nepton 280 Kit.

https://www.dropbox.com/s/tw56gf58ech21kz/screws.jpg

You got screws with yours ?

Only got the boards here :|

Batch 1 thing maybe. $250 more but came with socket cap screws. Cost was easily offset by a similar amount of mining profits and having fun sooner than everyone else. Grin

As for your trouble - the only time I've seen the regulator programming error is when there is an issue with power.

Have you tried a different PSU? What's your mining platform? What's your commandline to launch cgminer?

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

Quote from: ZiG on June 24, 2014, 12:55:02 PM

Quote from: ZiG on June 23, 2014, 06:54:57 PM

Hello...anybody home... Huh

Any progress...production...sales...new batches...any other exciting news...?

ZiG

MrTeal,

Any news...comments... will be appreciated... Wink

Thanks,

ZiG

Still waiting on a couple larger orders to come through. Unfortunately it's not economical to do a run of 100 boards, and we don't have the several hundred thousand dollars needed to do a reasonable sized run. This has definitely been a slower process than we would have liked. Regardless, if it does go ahead we should have plenty of notice before boards are ready.

We're having the same problem with getting DPS-2000BB PSU boards to production, large customers with the foot-dragging. Hopefully everything works out for a batch 3 for you guys. Gonna want one of these to play with.

joeltang

newbie

Activity: 35

Merit: 0

if it has a cooling issue it could do this. try 25Mhz clock rate.

QuiveringGibbage

hero member

Activity: 617

Merit: 543

http://idontALT.com

Quote from: Ski72 on June 23, 2014, 06:49:17 PM

I must say a very impressive (collection) progression of your hardware from diff 8.97M to 13.5G ...
I haven't been mining as long as that, but I share your passion for getting your hands "dirty" ... lol Grin

Thanks dude, appreciate the feedback

Cheers,
QG

jerbin

newbie

Activity: 27

Merit: 0

Quote from: joeltang on June 24, 2014, 03:51:27 PM

if you can flip the board over while it's running you'll see the pins for the PCI-E. one of the rows is +12v and tthe other is ground. Check those while it's trying to power up. It might be difficult to spot so watch the voltage carefully while you start cgminer.

Thanks again joeltang.

Just done that, while cgminer is running, flipped the board and used the check the voltage.. ALL 12.7v, no changes in volts.

When the cooler, fans are powering down and coming back on, is that the board resetting? (the 8 led strip cycles too)

Could it be a cooling issues? Seems strange to trigger it only milliseconds after starting cgminer (hasnt even logged into the pool yet to do anything). It only happens when starting cgminer.

joeltang

newbie

Activity: 35

Merit: 0

if you can flip the board over while it's running you'll see the pins for the PCI-E. one of the rows is +12v and tthe other is ground. Check those while it's trying to power up. It might be difficult to spot so watch the voltage carefully while you start cgminer.

jerbin

newbie

Activity: 27

Merit: 0

Quote from: joeltang on June 24, 2014, 03:39:44 PM

Use a volt meter if you have one. You could try running at super slow clock rate. 100Mhz for example .

I used a volti meter on the plugs themselves (not plugged into the board) and they are all fine.

[2014-06-25 03:43:00] Started cgminer 4.4.1
[2014-06-25 03:43:00] Probing for an alive pool
[2014-06-25 03:43:01] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 03:43:01] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 03:43:02] Pool 0 difficulty changed to 16

I tried it a 100Mhz and upon starting cgminer it does the same, it within a millisecond the fans/cooler and board seems to power down/restart or something.

Appreciate your help joeltang

joeltang

newbie

Activity: 35

Merit: 0

Use a volt meter if you have one. You could try running at super slow clock rate. 100Mhz for example .

jerbin

newbie

Activity: 27

Merit: 0

Quote from: joeltang on June 24, 2014, 03:00:30 PM

Quote from: jerbin on June 24, 2014, 02:48:25 PM

Quote from: jerbin on June 24, 2014, 02:40:23 PM

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Quote from: jerbin on June 24, 2014, 02:48:25 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

Another thing that is happening.

I went to power cycle the board like this:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

The board will start up, but then keep cycling (nepton head light goes on and off, and fans wind down and start back up again. This keeps happening on a loop.

If I do:

1. USB & power supply off
2. Plug in usb
3. Turn on power supply

It starts and doesn't do the loop above.

EDIT: The loop happens when cgminer is running, I just shut it down and did:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

And it is firing normally.

Ok now have this error:

[2014-06-25 02:47:06] Started cgminer 4.4.1
[2014-06-25 02:47:07] Probing for an alive pool
[2014-06-25 02:47:07] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:07] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:08] Pool 0 difficulty changed to 16
[2014-06-25 02:47:09] Network diff set to 13.5G
[2014-06-25 02:47:14] API running in UNRESTRICTED read access mode on port 4028 (9)
[2014-06-25 02:47:15] Hotplug: Hashfast added HFA 1
[2014-06-25 02:47:15] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:15] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:20] Hotplug: Hashfast added HFA 2
[2014-06-25 02:47:21] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:21] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)

I have seen "HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)" and I think it's lack of available power that can cause this. If you could monitor the voltage of the PCI-E while running you might see if it is dipping during operation. It is normal for FAN 4 to be fast all the time. My board does the same. The other fans speed up once the board is mining successfully.

How can I monitor it during operation?

I am using gigampz with the hp server psu (1000w). All 4 pcie plugs according to my multimeter are operating at 12.8v (not plugged into the board).

joeltang

newbie

Activity: 35

Merit: 0

Quote from: jerbin on June 24, 2014, 02:40:23 PM

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Quote from: jerbin on June 24, 2014, 02:40:23 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

Another thing that is happening.

I went to power cycle the board like this:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

The board will start up, but then keep cycling (nepton head light goes on and off, and fans wind down and start back up again. This keeps happening on a loop.

If I do:

1. USB & power supply off
2. Plug in usb
3. Turn on power supply

It starts and doesn't do the loop above.

EDIT: The loop happens when cgminer is running, I just shut it down and did:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

And it is firing normally.

Ok now have this error:

[2014-06-25 02:47:06] Started cgminer 4.4.1
[2014-06-25 02:47:07] Probing for an alive pool
[2014-06-25 02:47:07] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:07] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:08] Pool 0 difficulty changed to 16
[2014-06-25 02:47:09] Network diff set to 13.5G
[2014-06-25 02:47:14] API running in UNRESTRICTED read access mode on port 4028 (9)
[2014-06-25 02:47:15] Hotplug: Hashfast added HFA 1
[2014-06-25 02:47:15] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:15] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:20] Hotplug: Hashfast added HFA 2
[2014-06-25 02:47:21] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:21] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)

I have seen "HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)" and I think it's lack of available power that can cause this. If you could monitor the voltage of the PCI-E while running you might see if it is dipping during operation. It is normal for FAN 4 to be fast all the time. My board does the same. The other fans speed up once the board is mining successfully.

jerbin

newbie

Activity: 27

Merit: 0

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

Another thing that is happening.

I went to power cycle the board like this:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

The board will start up, but then keep cycling (nepton head light goes on and off, and fans wind down and start back up again. This keeps happening on a loop.

If I do:

1. USB & power supply off
2. Plug in usb
3. Turn on power supply

It starts and doesn't do the loop above.

EDIT: The loop happens when cgminer is running, I just shut it down and did:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

And it is firing normally.

Ok now have this error:

[2014-06-25 02:47:06] Started cgminer 4.4.1
[2014-06-25 02:47:07] Probing for an alive pool
[2014-06-25 02:47:07] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:07] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:08] Pool 0 difficulty changed to 16
[2014-06-25 02:47:09] Network diff set to 13.5G
[2014-06-25 02:47:14] API running in UNRESTRICTED read access mode on port 4028 (9)
[2014-06-25 02:47:15] Hotplug: Hashfast added HFA 1
[2014-06-25 02:47:15] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:15] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)
[2014-06-25 02:47:20] Hotplug: Hashfast added HFA 2
[2014-06-25 02:47:21] ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():3075
[2014-06-25 02:47:21] HFA : OP_USB_INIT failed! Operation status 20 (Regulator programming error)

jerbin

newbie

Activity: 27

Merit: 0

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

Another thing that is happening.

I went to power cycle the board like this:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

The board will start up, but then keep cycling (nepton head light goes on and off, and fans wind down and start back up again. This keeps happening on a loop.

If I do:

1. USB & power supply off
2. Plug in usb
3. Turn on power supply

It starts and doesn't do the loop above.

EDIT: The loop happens when cgminer is running, I just shut it down and did:

1. USB & power supply off
2. Turn on power supply
3. Plug in usb

And it is firing normally.

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

That's normal, FAN4 and PUMP run at 100%, they can be used for your pump or something like a chassis fan you want powered at 100%. FAN2 and FAN3 run at 50% on startup, until instructed by the mining software to change speed.

jerbin

newbie

Activity: 27

Merit: 0

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

Im seeing something weird.

I measured all the pcie connectors.. they are all 12.8v.

But I noticed that FAN 2, 3 has low power as the fans are slow, FAN 4 has full power (fan is going really fast)..

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: achtung082 on June 24, 2014, 06:53:50 AM

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM

Quote from: ZiG on June 24, 2014, 12:55:02 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I had to go to home depot and get 8x 3/4" 6-32(think thats what they are, well normal coarse thread PC) screws

Same here. I actually prefer this method to the thumbscrews, have more control and easier to make small adjustments.
http://i.imgur.com/R8Sytcj.jpg

Thanks.. Got it sorted

Anyone know what is this error?

[2014-06-25 00:22:11] Hotplug: Hashfast added HFA 50
[2014-06-25 00:22:12] HFA 50 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:12] HFA 50 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:12] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:17] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:17] Hotplug: Hashfast added HFA 51
[2014-06-25 00:22:18] HFA 51 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:18] HFA 51 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:18] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8
[2014-06-25 00:22:23] HFA 0: No response to name query - failed init or firmware upgrade required.
[2014-06-25 00:22:23] Hotplug: Hashfast added HFA 52
[2014-06-25 00:22:24] HFA 52 HFUSBInit usb write err:(-7) LIBUSB_ERROR_TIMEOUT
[2014-06-25 00:22:24] HFA 52 attempted reset got err:(0) LIBUSB_SUCCESS
[2014-06-25 00:22:24] HFA : send_packet: OP_USB_INIT USB Send error, ret 0 amount 0 vs. length 8

Double check that all the PCIe power cables are properly attached, and then power cycle the unit (with USB unconnected, the USB cable can power the board).

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: ZiG on June 23, 2014, 06:54:57 PM

Hello...anybody home... Huh

Any progress...production...sales...new batches...any other exciting news...?

ZiG

MrTeal,

Any news...comments... will be appreciated... Wink

Thanks,

ZiG

Still waiting on a couple larger orders to come through. Unfortunately it's not economical to do a run of 100 boards, and we don't have the several hundred thousand dollars needed to do a reasonable sized run. This has definitely been a slower process than we would have liked. Regardless, if it does go ahead we should have plenty of notice before boards are ready.

jerbin

newbie

Activity: 27

Merit: 0

Quote from: xjack on June 24, 2014, 01:07:57 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I used the shorter set of screws that came with the Habaneros, combined with the little black plastic spacers from the Nepton 280 Kit.

https://www.dropbox.com/s/tw56gf58ech21kz/screws.jpg
https://www.dropbox.com/s/tw56gf58ech21kz/screws.jpg

You got screws with yours ?

Only got the boards here :|

xjack

hero member

Activity: 539

Merit: 500

Quote from: ZiG on June 23, 2014, 06:54:57 PM

Not sure what I am missing, but what screw are you using to attach the Nepton 280L cooling head to the board, nothing seems to fit.

I used the shorter set of screws that came with the Habaneros, combined with the little black plastic spacers from the Nepton 280 Kit.

https://www.dropbox.com/s/tw56gf58ech21kz/screws.jpg

ZiG

sr. member

Activity: 406

Merit: 250

Hello...anybody home... Huh

Any progress...production...sales...new batches...any other exciting news...?

ZiG

MrTeal,

Any news...comments... will be appreciated... Wink

Thanks,

ZiG

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: GenTarkin on June 24, 2014, 01:33:43 AM