1.List of major node on the first page
2.No difference
2.No difference
If you are on linux, Nugget.conf and nugget.conf are different, windows doesn't matter. for linux it's nugget.conf
Topic: The Nugget Project, shut down. - page 18. (Read 25528 times)
If you are on linux, Nugget.conf and nugget.conf are different, windows doesn't matter. for linux it's nugget.conf
1.List of major node on the first page
2.No difference
2.No difference
Two questions.
What the correct fork (please getblockhash of a representavit block)?
Node listing to get here?
Ah, another one, correct conf file name, Nugget.conf or nugget.conf
What the correct fork (please getblockhash of a representavit block)?
Node listing to get here?
Ah, another one, correct conf file name, Nugget.conf or nugget.conf
As oldDIN says, seems to be forked. But strange thing is:

Both are nodes in http://www.mineblocks.eu:8080/nodes.php but mineblock chain is in block 1565, more than 100 blocks ahead. No payments since 7.51 GMT+1. Will stop mining till we have more light about the matter.

Quote
[
{
"addr" : "185.141.25.63:32703",
"services" : "00000001",
"lastsend" : 1476516072,
"lastrecv" : 1476516081,
"conntime" : 1476516071,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
},
{
"addr" : "185.106.122.33:32703",
"services" : "00000001",
"lastsend" : 1476516081,
"lastrecv" : 1476516114,
"conntime" : 1476516072,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
}
]
{
"addr" : "185.141.25.63:32703",
"services" : "00000001",
"lastsend" : 1476516072,
"lastrecv" : 1476516081,
"conntime" : 1476516071,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
},
{
"addr" : "185.106.122.33:32703",
"services" : "00000001",
"lastsend" : 1476516081,
"lastrecv" : 1476516114,
"conntime" : 1476516072,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
}
]
Both are nodes in http://www.mineblocks.eu:8080/nodes.php but mineblock chain is in block 1565, more than 100 blocks ahead. No payments since 7.51 GMT+1. Will stop mining till we have more light about the matter.
Mineblocks was in a fork.
Now it is fixed.
There was two networks at the same time.
Principal node was over 100 blocks lower than the other network.
Mineblocks was connected at principal node.
Now principal node it's on the good network.
As oldDIN says, seems to be forked. But strange thing is:

Both are nodes in http://www.mineblocks.eu:8080/nodes.php but mineblock chain is in block 1565, more than 100 blocks ahead. No payments since 7.51 GMT+1. Will stop mining till we have more light about the matter.

Quote
[
{
"addr" : "185.141.25.63:32703",
"services" : "00000001",
"lastsend" : 1476516072,
"lastrecv" : 1476516081,
"conntime" : 1476516071,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
},
{
"addr" : "185.106.122.33:32703",
"services" : "00000001",
"lastsend" : 1476516081,
"lastrecv" : 1476516114,
"conntime" : 1476516072,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
}
]
{
"addr" : "185.141.25.63:32703",
"services" : "00000001",
"lastsend" : 1476516072,
"lastrecv" : 1476516081,
"conntime" : 1476516071,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
},
{
"addr" : "185.106.122.33:32703",
"services" : "00000001",
"lastsend" : 1476516081,
"lastrecv" : 1476516114,
"conntime" : 1476516072,
"version" : 60013,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"startingheight" : 1403,
"banscore" : 0
}
]
Both are nodes in http://www.mineblocks.eu:8080/nodes.php but mineblock chain is in block 1565, more than 100 blocks ahead. No payments since 7.51 GMT+1. Will stop mining till we have more light about the matter.
there is no problem with my wallet, waiting for bounty
Only Seed nodes do not show it
mine is at 1533
Fork?
Wallet - 1358 blocks
Noda1 - 1388
Noda2- 1468
nugget.acc-pool.pw - 1504
Where is the truth
Wallet - 1358 blocks
Noda1 - 1388
Noda2- 1468
nugget.acc-pool.pw - 1504
Where is the truth
So now we can send PM to Hamukione with addresses for twitter follow or signature?
Nist5 is more profitable in gtx.
Pool not good occasionally loses connection and not sent coin in my wallet. 
Hello there
I have made the translation for Indian altcoin board, please follow the below link for it
https://bitcointalksearch.org/topic/m.16560771
I have made the translation for Indian altcoin board, please follow the below link for it
https://bitcointalksearch.org/topic/m.16560771
post at least one image, it seems very poor....
no bounty for twitter? i am waiting zerocom77 NLYGza2Sbqu4mDncMGXe7K16Dojnjjmpvh
i am waiting zerocom77 NLYGza2Sbqu4mDncMGXe7K16Dojnjjmpvh 
Thank you for help, guys!
I try with "-k" key and with "--alhoritm".
I open command line and write:
Maybe I should try some other miner?
Thx!
I try with "-k" key and with "--alhoritm".
I open command line and write:
Quote
C:\Users\Admin\Desktop\sg\sgminer.exe -k nist5 -o stratum+tcp://mineblocks.eu:3026 -u mywalletaddress -p x
And cursor only change line...without any error..Maybe I should try some other miner?
Thx!
hmm, well if your using an AMD card there's not really any option except sgminer that i know of ;p course im an Nvidia miner myself, so can't sadly give much insight on troubleshooting :/
Thank you for help, guys!
I try with "-k" key and with "--alhoritm".
I open command line and write:
Maybe I should try some other miner?
Thx!
I try with "-k" key and with "--alhoritm".
I open command line and write:
Quote
C:\Users\Admin\Desktop\sg\sgminer.exe -k nist5 -o stratum+tcp://mineblocks.eu:3026 -u mywalletaddress -p x
And cursor only change line...without any error..Maybe I should try some other miner?
Thx!
will someone try my pool? guess not.. bye
-k is the same as -a on ccminer, it's the "algo" flag
add ".exe" to the sgminer in your .bat, and make sure start it in same folder as miner
You are probably correct. I have always used --algorithm but as said I dont use sgminer very often. add ".exe" to the sgminer in your .bat, and make sure start it in same folder as miner
Hello!
How can I mine on your pool?
I have R9390 card
I download sgminer from this topic: https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
And start them with config:
What wrong?
Sorry for the stupid questions.
Thank you!
Try adding How can I mine on your pool?
I have R9390 card
I download sgminer from this topic: https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
And start them with config:
Quote
sgminer -k nist5 -o stratum+tcp://mineblocks.eu:3026 -u mywalletadr -p x
But miner close.What wrong?
Sorry for the stupid questions.
Thank you!
Code:
pause
I rarely use sgminer but I am guessing that -k isnt the right option for the algo.
-k is the same as -a on ccminer, it's the "algo" flag
add ".exe" to the sgminer in your .bat, and make sure start it in same folder as miner
Hello!
How can I mine on your pool?
I have R9390 card
I download sgminer from this topic: https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
And start them with config:
What wrong?
Sorry for the stupid questions.
Thank you!
Try adding How can I mine on your pool?
I have R9390 card
I download sgminer from this topic: https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
And start them with config:
Quote
sgminer -k nist5 -o stratum+tcp://mineblocks.eu:3026 -u mywalletadr -p x
But miner close.What wrong?
Sorry for the stupid questions.
Thank you!
Code:
pause
I rarely use sgminer but I am guessing that -k isnt the right option for the algo.
Jump to: