Code:
/Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer -o http://pit.deepbit.net:8332 -u xxx -p yyy -S /dev/cu.SLAB_USBtoUART
edit: wait, let me try your fixed v1.2
Topic: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC] - page 40. (Read 166756 times)
So in uninstalling v10.7, trying v1.2, then reinstalling v10.7, I'm running into a snag. Now when I use v10.7, it uses my GPU. It will not see the USB Eruptor. I'm running it from terminal the same way as before, with the same commands as listed below (minus u/p details.) Not sure why it's not working now.
edit: wait, let me try your fixed v1.2
edit: wait, let me try your fixed v1.2
Damn that was some mistake to make, I knew I should have tested it on a VM it always finds the libraries elsewhere and I miss these things, thanks for the report!
Fixed in the new build of 1.2
http://fabulouspanda.co.uk/macminer/downloads/MacMiner.app-1.2(2).zip
Fixed in the new build of 1.2
http://fabulouspanda.co.uk/macminer/downloads/MacMiner.app-1.2(2).zip
Would you mind giving it a shot in the latest MacMiner with -S /dev/cu.SLAB_USBtoUART in the bfgminer advanced settings window and letting me know whether that goes ok for you?
i did try that if I'm not mistaken and it did not work.Code:
dyld: Library not loaded: /Applications/MacMiner.app/Contents/Resources/opt/jansson/lib/libjansson.4.dylib
Referenced from: /Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer
Reason: image not found
Would you mind giving it a shot in the latest MacMiner with -S /dev/cu.SLAB_USBtoUART in the bfgminer advanced settings window and letting me know whether that goes ok for you?
i did try that if I'm not mistaken and it did not work.Would you mind giving it a shot in the latest MacMiner with -S /dev/cu.SLAB_USBtoUART in the bfgminer advanced settings window and letting me know whether that goes ok for you?
i did try that if I'm not mistaken and it did not work.
Would you mind giving it a shot in the latest MacMiner with -S /dev/cu.SLAB_USBtoUART in the bfgminer advanced settings window and letting me know whether that goes ok for you?
Totally worked for me too!!! THX!!
Glad to hear it's working for you! Are you using MacMiner or running in Terminal?1.2 is just out, should work with block erupter in MacMiner on 10.7 or 10.8
Totally worked for me too!!! THX!!
Glad to hear it's working for you! Are you using MacMiner or running in Terminal?1.2 is just out, should work with block erupter in MacMiner on 10.7 or 10.8
Thanks for the donation! It's much appreciated.
What you're doing looks right, what version are you running? Unfortunately there's a problem with the options in 10.7 version which I'm readying a patch for as we speak. If running 10.8 please make sure it's v1.1.1 (about MacMiner in MacMiner menu)
If you're on 10.7 it will work with
open Terminal
enter:
/Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer -o pool.fabulouspanda.co.uk:9332 -u yourBTC address -p anything -S /dev/cu.SLAB_USBtoUART
Totally worked for me too!!! THX!! What you're doing looks right, what version are you running? Unfortunately there's a problem with the options in 10.7 version which I'm readying a patch for as we speak. If running 10.8 please make sure it's v1.1.1 (about MacMiner in MacMiner menu)
If you're on 10.7 it will work with
open Terminal
enter:
/Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer -o pool.fabulouspanda.co.uk:9332 -u yourBTC address -p anything -S /dev/cu.SLAB_USBtoUART
I could have sworn I fixed that before the last update. The latest version should fix both issues. I'm afraid you'll have to quit that bfgminer instance from activity monitor in the utilities folder though, sorry about that!
Swapping bfgminer w 10.7 version worked - thnx!
Though I may have angered the UI gods somewhere along the way …
(unable to use Start/Stop & "?" button after this visual anomaly)
Just testing a bit on my iMac w 10.8 - will likely leave the mining to my old Mac Pro (10.7) in the long run.
Though I may have angered the UI gods somewhere along the way …
(unable to use Start/Stop & "?" button after this visual anomaly)
Just testing a bit on my iMac w 10.8 - will likely leave the mining to my old Mac Pro (10.7) in the long run.
Ah, I note your options worked so it must be 10.8 version - if it IS 1.1.1 you're running you may find this an odd fix but please try downloading the 10.7 version and showing package contents on it to /Contents/Resources/bgminer and replace the bfgminer folder in the 10.8 version with the one from the 10.7 version and let me know how it goes. Sorry to have to ask you to test for me but I don't have a device to test with!
Thanks for the donation! It's much appreciated.
What you're doing looks right, what version are you running? Unfortunately there's a problem with the options in 10.7 version which I'm readying a patch for as we speak. If running 10.8 please make sure it's v1.1.1 (about MacMiner in MacMiner menu)
If you're on 10.7 it will work with
open Terminal
enter:
/Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer -o pool.fabulouspanda.co.uk:9332 -u yourBTC address -p anything -S /dev/cu.SLAB_USBtoUART
many apologies to 10.7 users will get this fixed right away!
What you're doing looks right, what version are you running? Unfortunately there's a problem with the options in 10.7 version which I'm readying a patch for as we speak. If running 10.8 please make sure it's v1.1.1 (about MacMiner in MacMiner menu)
If you're on 10.7 it will work with
open Terminal
enter:
/Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer -o pool.fabulouspanda.co.uk:9332 -u yourBTC address -p anything -S /dev/cu.SLAB_USBtoUART
many apologies to 10.7 users will get this fixed right away!
Is this thing fully self contained?
Or do you have to install either cgminer or bflminer also?
Or do you have to install either cgminer or bflminer also?
Yup - fully contained.
Hey Anonymailer tried following your instructions in the Block Erupter thread:
Use fabulouspanda.co.uk/macminer
install these drivers http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
plug in the device, open terminal and run ls /dev/cu*
find your device which will look something like /dev/cu.yourdevice
in advanced options in MacMiner put -S /dev/cu.your device then click apply
click start
you're mining!
install these drivers http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
plug in the device, open terminal and run ls /dev/cu*
find your device which will look something like /dev/cu.yourdevice
in advanced options in MacMiner put -S /dev/cu.your device then click apply
click start
you're mining!
I followed the above steps but no luck for me. Here are my settings:
which led to the following output:
Also tried running with GPU mining enabled but that led to me mining w GPU only
(Block Erupter USB idle LED stayed on, hashrate stayed @ GPU only level)
Am I missing something obvious?
EDIT: Sent you a small donation of 0.1BTC - wish I had more to give
Is this thing fully self contained?
Or do you have to install either cgminer or bflminer also?
Or do you have to install either cgminer or bflminer also?
1.1.1 for 10.8 released with important bug fixes and support for block erupter usb miners
i'm running 10.7.5 with a few usb erupters on the way... is there a version of 1.1.1 available for 10.7?
EDIT: nevermind, i'm running 10.8.3!
but yes, 1.1.1 for 10.7 is up now too. Couple of little GUI bugs but I'm pretty wiped out right now so 1.1.2 will follow relatively soon. Probably around the time bfgminer has cpu mining issues fixed properly.Just had a chance to test this again on 10.8 with the newest 1.1.1 update. BFgminer still does not start and when ran in terminal as suggested I get this:
Code:
Need to specify at least one pool server.
Input server details.
URL:
mining.usa.la.hypernova.pw:9332
Username:
worker.1
Password:
xxxxxxx
Segmentation fault: 11
CPUminer for scrypt seems to be working properly and poclbm Miner works well with BTC but no LTC as expected.
Thanks for checking that for me, can you tell me what specific mac and gpu you have? It looks like a known error with running on the CPU but it shouldn't try to mine on the CPU if you have a capable GPU… maybe you could try running with --disable-cpu and seeing if it says 'no devices'? I'm not sure whether --disable-cpu does anything as it's --enable-cpu that's documented but i think they go both ways…
Huh, if you're not getting any output from bfgminer window in MacMiner for 10.8 1.1 can you please run it in the Terminal at /Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer and give me the output of that? I've had a couple of reports of problems with 1.1 but haven't heard enough to put my finger on the problem yet…
in 10.7 just cpu miner window does --scrypt till the next update whereas in the 10.8 version cpu window and bfg miner window support it.
Just had a chance to test this again on 10.8 with the newest 1.1.1 update. BFgminer still does not start and when ran in terminal as suggested I get this:
Code:
Need to specify at least one pool server.
Input server details.
URL:
mining.usa.la.hypernova.pw:9332
Username:
worker.1
Password:
xxxxxxx
Segmentation fault: 11
CPUminer for scrypt seems to be working properly and poclbm Miner works well with BTC but no LTC as expected.
1.1.1 for 10.8 released with important bug fixes and support for block erupter usb miners
i'm running 10.7.5 with a few usb erupters on the way... is there a version of 1.1.1 available for 10.7?
EDIT: nevermind, i'm running 10.8.3!
1.1.1 for 10.8 released with important bug fixes and support for block erupter usb miners
Using Windows what's the best software to run the asic USB units in?
Asking that question in a thread about a program for mining on Macs called MacMiner seems a peculiar leap of logic and I have no idea…
But it's probably cgminer or bfgminer
Thanks.
I did a search and saw the info not the topic.....
oppps..
Jump to: