Pages:
Author

Topic: theASIC miner availible! - page 4. (Read 4353 times)

newbie
Activity: 4
Merit: 0
June 01, 2013, 03:52:25 PM
#3
Hi,
It is able to mine with around 6 to 7 GH/s at a power usage of 70 Watt.
But the website says 5.5 GH/s.
Which is it?
With the newest optimized firmware we are getting 6-7 GH/s (depends on the device). We will update this information if its tested enough!

Onboard there`s some kind of embedded hardware which allows mining without a additional running computer, if you are running more than two devices, you may chain them via HDMI.
Daisy chaining via HDMI?
Even if it's possible, why?
Yes!
When using two devices with the chaining feature, the device gets controlled by a primary device, the embedded hardware on the other devices will be switched off to save some power.


Could you post a video of your device hashing?
How long have the boards been running without issues?
Also fixing the English on your website would go a long way towards people trusting you.

Cheers
I will post some videos of our device later. Sorry, as we are a chinese based company, it may be possible to have some typos on our website. I will tell it to the responsible employee! Thanks for the tip!


Tom
newbie
Activity: 49
Merit: 0
June 01, 2013, 03:42:23 PM
#2
It is able to mine with around 6 to 7 GH/s at a power usage of 70 Watt.
But the website says 5.5 GH/s.
Which is it?

Onboard there`s some kind of embedded hardware which allows mining without a additional running computer, if you are running more than two devices, you may chain them via HDMI.
Daisy chaining via HDMI?
Even if it's possible, why?

Could you post a video of your device hashing?
How long have the boards been running without issues?
Also fixing the English on your website would go a long way towards people trusting you.


Cheers
newbie
Activity: 4
Merit: 0
June 01, 2013, 03:11:12 PM
#1
Hi Ladies and Gentlemen,

sorry that i have to post this to the "Newbie" section, but i`m not allowed to put it into some other part of the board.

I want to advertise some new Bitcoin ASIC miner, build completely on our own except the main chip (Avalon). We call it "theASIC". It is able to mine with around 6 to 7 GH/s at a power usage of 70 Watt. Onboard there`s some kind of embedded hardware which allows mining without a additional running computer, if you are running more than two devices, you may chain them via HDMI.

At the moment, ~140 devices are availible in a maximum of two weeks, these are just getting produced by our partners! We already have some of them working at our company for testing and mining.

You are able to buy it on our web page (www.theasic.com, please order through our contact page), it is 3.2Bitcoins for one device with flat shipping fee (to all countries!)! If you have any questions, dont hesitate to ask!

Have a nice day,

Tom
Pages:
Jump to: