Is this supposed to replace BF2Coins that could be mined in the browser?
i will work on it, but it's not easy
Topic: TomosMining - HIGHEST PAID MINING (BTC->FaucetHub) 5% REF! - page 66. (Read 35660 times)
i will work on it, but it's not easy
Is this supposed to replace BF2Coins that could be mined in the browser?
the .dll don't resolve that "the ordinal 75 could not be located in the dynamic link library" how could i do ?
i copy the .dll ine the folder with bat and miner, i have to put it in windows32 and didn't work too..
help please
i copy the .dll ine the folder with bat and miner, i have to put it in windows32 and didn't work too..
help please
try open cmd as admininstrator and write:
Code:
sfc /scannow
-----------------------------
INFO:
I will make short server restart (within 5 minutes) and adjust a little payouts (down) , because of higher difficulty of ETN + XMR blocks (less payout from mining pages)
the .dll don't resolve that "the ordinal 75 could not be located in the dynamic link library" how could i do ?
i copy the .dll ine the folder with bat and miner, i have to put it in windows32 and didn't work too..
help please
i copy the .dll ine the folder with bat and miner, i have to put it in windows32 and didn't work too..
help please
https://snag.gy/fmUQyL.jpg error im getting ;/
Download dll from here: https://mega.nz/#!85ZEXDzC!Igpur-6Iolkg4_YXD7ueT7MPQmb3ks1RghraL9zC390 and copy in C:\Windows\System32
https://snag.gy/fmUQyL.jpg error im getting ;/
Thanks Ranger9202, tried both of your tips, no luck! I guess that's the max this CPU can get it out for now. What is your hash rate with your CPU after doing these optimizations?
@ OP, can you please have some optimizations to the script so that it can utilize 100% CPU prowess if we want to? If that is possible, that'd be great. Btw, thanks for the payouts. Cheers!
@ OP, can you please have some optimizations to the script so that it can utilize 100% CPU prowess if we want to? If that is possible, that'd be great. Btw, thanks for the payouts. Cheers!
I use to get max 160 h/s when idle, now max 290 h/s and its still at the same load as before, 60% load max on both settings.
When you rightclick>properties, the target should look something like this F:\Crypto\tOMOS\miner\NsCpuCNMiner64.exe NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u youradress -t 4 . It took me a while to figure it out, but you only need to add the Bold part in to the target save it, than run it as admin, reboot, and you should be good to go. Remember, you need to run the miner with the shortcut on desktop not from the folder where it is.
For me too its working well and i'll recommend this in facebook page 
Thanks Ranger9202, tried both of your tips, no luck! I guess that's the max this CPU can get it out for now. What is your hash rate with your CPU after doing these optimizations?
@ OP, can you please have some optimizations to the script so that it can utilize 100% CPU prowess if we want to? If that is possible, that'd be great. Btw, thanks for the payouts. Cheers!
@ OP, can you please have some optimizations to the script so that it can utilize 100% CPU prowess if we want to? If that is possible, that'd be great. Btw, thanks for the payouts. Cheers!
Thank you for this New Site - I am waiting for Nice Hash (combination TomosMining+ Nice Hash = Earn Big )
) hry guys, sorry for late response, i was on teambuilding and now fighting with hangover pain 
script for payouts was stuck, i sent it right now, check your fauethub accounts
script for payouts was stuck, i sent it right now, check your fauethub accounts
Got third payment http://prntscr.com/hl685s
Great Job
hry guys, sorry for late response, i was on teambuilding and now fighting with hangover pain
script for payouts was stuck, i sent it right now, check your fauethub accounts
script for payouts was stuck, i sent it right now, check your fauethub accounts
Trust me, something is going wrong and is not the .bat to open with admin rights but the exe file (for the first time).
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
Got it up and running, finally some good results
http://prntscr.com/hl0yf3 , still not what I need but at least a bit better..Lets mine now 
Thanks for your help LullozGetting up to 290 h/s now!
Can you please let me know how did you got it sorted? Same problem occurs for me on my Core i7 4710-HQ processor. I get around 80-150 h/s and my load doesn't go above 40% as well. Thanks in advance.
1) http://prntscr.com/hl4yfr , Create a shortcut on the NsCpu... to desktop not on TomosMining
2) http://prntscr.com/hl4ysa , Right click, properties, and in target add the following affter...NsCpuCNMiner64.exe: NsCpuCNMiner64 -o stratum+tcp://80.211.205.216:3333 -nofee 1 -p x -dbg -2 -u
3) Run NsCpuCn as Admin once and reboot your pc.
4) Run it again, and fast mode should be enabled.
If this doesn't work, Disable UAC and try. I did both steps, but you migh need to do the first one only.
PS. Tomos, nexy payout will be in?
Hi tomos81, please check your personal message.
I have writed about a problem with my account.
I have writed about a problem with my account.
Trust me, something is going wrong and is not the .bat to open with admin rights but the exe file (for the first time).
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
Got it up and running, finally some good results
http://prntscr.com/hl0yf3 , still not what I need but at least a bit better..Lets mine now Thanks for your help LullozGetting up to 290 h/s now!
Can you please let me know how did you got it sorted? Same problem occurs for me on my Core i7 4710-HQ processor. I get around 80-150 h/s and my load doesn't go above 40% as well. Thanks in advance.
I downloaded the zip, but when I run the exe I receive this message "No pools specified! Specify at least one pool in "epools.txt" file or in "-o" parameter".
I tried with -o 1, but it didn't work either. What can I do?
I tried with -o 1, but it didn't work either. What can I do?
Trust me, something is going wrong and is not the .bat to open with admin rights but the exe file (for the first time).
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
Got it up and running, finally some good results
http://prntscr.com/hl0yf3 , still not what I need but at least a bit better..Lets mine now Thanks for your help LullozGetting up to 290 h/s now!
Cool, i'm very happy for you
Trust me, something is going wrong and is not the .bat to open with admin rights but the exe file (for the first time).
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
You are still mining with hand brake on
A friend reported this : About 280 h/s on i7-4770 ("-t 4")
Someone can help Ranger for enable fast mining mode (first start with admin privilege) please ?
I can't help as needed with my poor english
Got it up and running, finally some good results
http://prntscr.com/hl0yf3 , still not what I need but at least a bit better..Lets mine now Thanks for your help LullozGetting up to 290 h/s now!
Jump to: