Topic: TOPCOIN (v3) - Scrypt POW/50% POS Hybrid - Coin Control - page 16. (Read 69592 times)
Thanks for clearing that up for me
Still working on things with Cryptopia's help. Can everyone join me in trying to sync up with the nodes they are reporting?
If you go to https://www.cryptopia.co.nz/CoinInfo/ and search for TopCoin, you will see information that includes a clickable 'Connections' field. Click on that, and take the addnode list they have showing to put in your TopCoin3.conf file. They advised to do it as follows (using current list):
connect=104.192.102.188:22561
connect=47.34.121.136:22561
connect=162.243.74.149:22561
connect=68.71.58.226:22561
listen=0
The important details are the connect vs. addnode - this forces the nodes you list, and the listen=0 prevents from any nodes popping in automatically. Once you get fully synced to these nodes, then you should be able to set your conf file back to normal.
Please let me know if you need any help with any of it
Thanks,
crymzyn
If you go to https://www.cryptopia.co.nz/CoinInfo/ and search for TopCoin, you will see information that includes a clickable 'Connections' field. Click on that, and take the addnode list they have showing to put in your TopCoin3.conf file. They advised to do it as follows (using current list):
connect=104.192.102.188:22561
connect=47.34.121.136:22561
connect=162.243.74.149:22561
connect=68.71.58.226:22561
listen=0
The important details are the connect vs. addnode - this forces the nodes you list, and the listen=0 prevents from any nodes popping in automatically. Once you get fully synced to these nodes, then you should be able to set your conf file back to normal.
Please let me know if you need any help with any of it
Thanks,
crymzyn
For anyone who is wanting to get new TOP v3 from me... I am doing my best to figure out some issues we're having, and will be in touch with you asap. If you want your coins right away, you'll have to sign up for an account at https://www.cryptopia.co.nz/ and I will transfer them there. That way we can have some accountability if things do not show up.
There are some issues with what I suspect may be a soft fork. The prohashing.com explorer seems to have a different block count than anyone who I've spoke to, and being that cryptopia uses prohashing to check their transactions, we need to get them synced with the majority of the network. I'll continue to figure it out, but if anyone else has some ideas - please feel free to let me know
There are some issues with what I suspect may be a soft fork. The prohashing.com explorer seems to have a different block count than anyone who I've spoke to, and being that cryptopia uses prohashing to check their transactions, we need to get them synced with the majority of the network. I'll continue to figure it out, but if anyone else has some ideas - please feel free to let me know
been gone for a few years and just got back to trading coins. Is this coin still active?
We lost our main developer but we're working on finding a replacement. I'm still around to help with what I can and the community seems to still be intact for the most part.
been gone for a few years and just got back to trading coins. Is this coin still active?
George5, my wallet crashing when ("error opening database") opening your downloaded blockchain file
updated my topcoin3.conf with new noded but sync was still TOO slow(
updated my topcoin3.conf with new noded but sync was still TOO slow(
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
What you need to do is copy the blk0001.dat file to the location of your topcoin3-qt.exe file, rename it to blk0001.dat.bak, and then start the application with the following switch:
topcoin3-qt.exe -loadblock=blk0001.dat.bak
It should then import the blockchain that George5 provided. Please let me know how it goes.
Thanks
crymzyn
thank you crymzyn, i succ synced my wallet with whith algo after 2 months unsucc trying
I would like for everyone to try these nodes instead, by the way... I think some of our network issues are due to bad nodes. Remove any addnode lines you have in your TopCoin3.conf file and put these in place of them:
addnode=98.115.147.74:22561
addnode=47.34.121.136:22561
addnode=155.186.121.131:22561
addnode=162.243.74.149:22561
Thanks
crymzyn
addnode=98.115.147.74:22561
addnode=47.34.121.136:22561
addnode=155.186.121.131:22561
addnode=162.243.74.149:22561
Thanks
crymzyn
Done and I'll let you know in a couple days. Will OP remove the dead exchanges and update the link to Cryptopia trading pair?
https://www.cryptopia.co.nz/Exchange/?market=TOP_BTC
I will try to get in touch with him and ask. I know he's kind of stepped away from cryptos for now, but I may be able to have him give me rights to it somehow.
I would like for everyone to try these nodes instead, by the way... I think some of our network issues are due to bad nodes. Remove any addnode lines you have in your TopCoin3.conf file and put these in place of them:
addnode=98.115.147.74:22561
addnode=47.34.121.136:22561
addnode=155.186.121.131:22561
addnode=162.243.74.149:22561
Thanks
crymzyn
addnode=98.115.147.74:22561
addnode=47.34.121.136:22561
addnode=155.186.121.131:22561
addnode=162.243.74.149:22561
Thanks
crymzyn
Done and I'll let you know in a couple days. Will OP remove the dead exchanges and update the link to Cryptopia trading pair?
https://www.cryptopia.co.nz/Exchange/?market=TOP_BTC
George5, my wallet crashing when ("error opening database") opening your downloaded blockchain file
updated my topcoin3.conf with new noded but sync was still TOO slow(
updated my topcoin3.conf with new noded but sync was still TOO slow(
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
What you need to do is copy the blk0001.dat file to the location of your topcoin3-qt.exe file, rename it to blk0001.dat.bak, and then start the application with the following switch:
topcoin3-qt.exe -loadblock=blk0001.dat.bak
It should then import the blockchain that George5 provided. Please let me know how it goes.
Thanks
crymzyn
Yes, me too. I haven't got fully synced for about 2-3 weeks now. Will someone able to share a snapshot?
The most recent snapshot is here: https://mega.nz/#!9RIWCKBS!Vgev2xPXEnzCKLgIe3Lmh-_gW5Q1K9VEN5KS4cEK7FQ
I would like for everyone to try these nodes instead, by the way... I think some of our network issues are due to bad nodes. Remove any addnode lines you have in your TopCoin3.conf file and put these in place of them:
addnode=98.115.147.74:22561
addnode=47.34.121.136:22561
addnode=155.186.121.131:22561
addnode=162.243.74.149:22561
Thanks
crymzyn
Yes, me too. I haven't got fully synced for about 2-3 weeks now. Will someone able to share a snapshot?
The most recent snapshot is here: https://mega.nz/#!9RIWCKBS!Vgev2xPXEnzCKLgIe3Lmh-_gW5Q1K9VEN5KS4cEK7FQ
Still cannot sync my wallet for 2-3 weeks(
My wallet was synced for 99% to ~12k blocks to full sync, and after some time next was rolling back to ~60k.
And so again and again.
Someone faced the same problem?
My wallet was synced for 99% to ~12k blocks to full sync, and after some time next was rolling back to ~60k.
And so again and again.
Someone faced the same problem?
Yes, me too. I haven't got fully synced for about 2-3 weeks now. Will someone able to share a snapshot?
Still cannot sync my wallet for 2-3 weeks(
My wallet was synced for 99% to ~12k blocks to full sync, and after some time next was rolling back to ~60k.
And so again and again.
Someone faced the same problem?
My wallet was synced for 99% to ~12k blocks to full sync, and after some time next was rolling back to ~60k.
And so again and again.
Someone faced the same problem?
Hey crymzyn,
Already sent you a PM.
Can you help me get the coins from my old TOP wallet onto the new chain.
Will be happy to make a large donation to the Heroes Project.
Thanks.
Already sent you a PM.
Can you help me get the coins from my old TOP wallet onto the new chain.
Will be happy to make a large donation to the Heroes Project.
Thanks.
Hey there! I'm going to try to get to my PMs today - thank you for your patience
Hey crymzyn,
Already sent you a PM.
Can you help me get the coins from my old TOP wallet onto the new chain.
Will be happy to make a large donation to the Heroes Project.
Thanks.
Already sent you a PM.
Can you help me get the coins from my old TOP wallet onto the new chain.
Will be happy to make a large donation to the Heroes Project.
Thanks.
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
Hi, Im not a developer, so I don't know what that error means. If the wallet doesn't like my blockchain, you better let it sync from scratch, even though it's slow.
Agreed. I know it can be a slow process, but I've had to do the same thing to get it fully synced.
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
Hi, Im not a developer, so I don't know what that error means. If the wallet doesn't like my blockchain, you better let it sync from scratch, even though it's slow.
George5, my wallet crashing when ("error opening database") opening your downloaded blockchain file
updated my topcoin3.conf with new noded but sync was still TOO slow(
updated my topcoin3.conf with new noded but sync was still TOO slow(
---------------------------
Runaway exception
---------------------------
A fatal error occurred. TopCoin3 can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Documents and Settings\Owner\Desktop\TopCoin3.1\topcoin3-qt.exe in Runaway exception
---------------------------
OK
---------------------------
George5, my wallet crashing when ("error opening database") opening your downloaded blockchain file
updated my topcoin3.conf with new noded but sync was still TOO slow(
updated my topcoin3.conf with new noded but sync was still TOO slow(
cannot fully sync blockchain for ~ 1 week (
i tryes default config and this:
addnode=162.243.74.149
addnode=203.20.114.252
addnode=209.188.18.188
addnode=68.235.184.68
addnode=77.78.35.155
addnode=96.2.34.208
addnode=wmikrut.com:25029
What can I do to fully synchronize the blockchain?
i tryes default config and this:
addnode=162.243.74.149
addnode=203.20.114.252
addnode=209.188.18.188
addnode=68.235.184.68
addnode=77.78.35.155
addnode=96.2.34.208
addnode=wmikrut.com:25029
What can I do to fully synchronize the blockchain?
Here is a fresh blockchain that I just uploaded: https://mega.nz/#!lIpxDCCK!k3DWcnTL7G6_v3-4aonI8gk_jtumvarzIn_qEQKDt-g
And the list of nodes:
Quote
addnode=68.71.58.226:22561
addnode=173.208.164.34:22561
addnode=47.34.121.136:22561
addnode=108.49.185.3:22561
addnode=209.188.18.188:22561
addnode=89.15.109.151
addnode=178.157.251.59
addnode=97.90.203.136
addnode=108.20.20.59
addnode=81.44.164.109
addnode=98.115.147.74
addnode=100.34.51.25
addnode=86.0.23.14
addnode=85.236.188.28
addnode=178.157.250.41
addnode=99.238.163.232
addnode=108.49.185.3
addnode=47.34.94.27:22561
addnode=184.164.129.202:63963
addnode=113.163.44.183:57628
addnode=83.50.31.117:59461
addnode=162.243.74.149
addnode=173.208.164.34:22561
addnode=47.34.121.136:22561
addnode=108.49.185.3:22561
addnode=209.188.18.188:22561
addnode=89.15.109.151
addnode=178.157.251.59
addnode=97.90.203.136
addnode=108.20.20.59
addnode=81.44.164.109
addnode=98.115.147.74
addnode=100.34.51.25
addnode=86.0.23.14
addnode=85.236.188.28
addnode=178.157.250.41
addnode=99.238.163.232
addnode=108.49.185.3
addnode=47.34.94.27:22561
addnode=184.164.129.202:63963
addnode=113.163.44.183:57628
addnode=83.50.31.117:59461
addnode=162.243.74.149
Jump to: