Author

Topic: [TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH - page 107. (Read 317969 times)

hero member
Activity: 966
Merit: 500
I just set up my 11th Masternone
legendary
Activity: 952
Merit: 1000
We have moved to the top of the list at Safecex with 23 Votes. I appreciate everyone going out and voting for Transfercoin. If you haven't voted please do. I am in the troll box there promoting with others. Please use the link below. You do have to create an account to vote.  Grin

https://safecex.com/coin/add?q=TX



I received an email from 1ex.trade. They just need to verify Infernoman by a form of ID and they will get us listed. Below is the email I received from them.  Grin

We had a look at the data provided.
To do the final verification the coin developer must be verified now. A form of ID e.g. driver license is needed. A copy should be attached to this ticked.

Once we have received this and all is ok the coin will be listed

Regards

1EX Support Team


Here is an update to this post.

We are up to 27 votes at Safecex. Which is really good, don't forget to vote if you haven't yet. I hope they are adding us soon. With the new users that signed up and all the mentions on twitter from us, I would hope they are close.



1ex.trade has the information requested so now we just have to be patient and wait for them to add us. While I was writing this post I got the email that verification is approved. Email below. Lets make sure that when we get listed that we make a good showing and send some trades there way. 1ex.Trade will be our 3rd exchange.

thank you for the verification.

The coin is now approved for listing and we will sync the coin up this weekend.

Once the coin is ready to go live we send you another confirmation

Regards

1EX Support Team

Also do not forget that we have Livecoin.net adding us soon. In correspondance they quoted me about 20 days until they could add us. I figure we have about 10 more days until we are there. Reminder link below.

https://bitcointalksearch.org/topic/m.13618017


Just as i suspected we are starting to get more active and February is going to be a good and active month. We have new wallets being released Februrary 1 -3, Rokos release is scheduled for later this month. We also will have the trezor giveaway started in February. Looks like the 1 month is leading for the length. We will leave the poll up there until February 1 end of day.  Lets try to step up our recruiting and getting the word out there. Were gonna need traders for the exchanges, so publicity is going to be key. We are doing great and everything is progressing well. Thanks agian to everyone.  Grin
legendary
Activity: 1504
Merit: 1002
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin

Having a hard time syncing a new wallet.  I tried the bootstrap and instructions and it did nothing.  I have been syncing over 10 hours and am still at 16 weeks behind.  I have 30 connections but the blocks are coming in so slow.  Is there a technique I should try?

edit: Just added maxorphanblocks=10000 - Will see if that helps.

edit2: ok much faster syncing - you may want to add maxorphanblocks=10000 to the OP transfer.conf?

Sure we can add that to the OP. It will also be coded into the wallets with the next release of wallets. Those will be out February 1st - 3rd.  Also Infernoman was testing sync times lastnight with new code. The tests looked good from his end, he is just finalizing some adjustments.

Thanks for your continued support pokeytex.  Grin

Thank you for dealing with my noob questions!

Man what a difference maxorphanblocks=10000 makes! Damn near done syncing!
Hey there pokey i dont understand why it wouldn't work, but the fact i think is because if its an already synced/syncing wallet it will not work as the bootstrap.dat is more the less there to build transaction/block data from scratch Smiley

LOL - it is probably just end user error! :-) - It has happened to me before!
member
Activity: 84
Merit: 10
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin

Having a hard time syncing a new wallet.  I tried the bootstrap and instructions and it did nothing.  I have been syncing over 10 hours and am still at 16 weeks behind.  I have 30 connections but the blocks are coming in so slow.  Is there a technique I should try?

edit: Just added maxorphanblocks=10000 - Will see if that helps.

edit2: ok much faster syncing - you may want to add maxorphanblocks=10000 to the OP transfer.conf?

Sure we can add that to the OP. It will also be coded into the wallets with the next release of wallets. Those will be out February 1st - 3rd.  Also Infernoman was testing sync times lastnight with new code. The tests looked good from his end, he is just finalizing some adjustments.

Thanks for your continued support pokeytex.  Grin

Thank you for dealing with my noob questions!

Man what a difference maxorphanblocks=10000 makes! Damn near done syncing!
Hey there pokey i dont understand why it wouldn't work, but the fact i think is because if its an already synced/syncing wallet it will not work as the bootstrap.dat is more the less there to build transaction/block data from scratch Smiley
legendary
Activity: 952
Merit: 1000

I agree. I encourage everyone who has not put in a request at Poloniex yet, to do so. They are delisting 12 coins on February 8, 2016. I found the below in another thread.

https://poloniex.com/coinRequest

On 2/8/2016, the following markets will be delisted: CMNT, HIRO, NXTI, XAI, CHA, OPAL, CYC, URO, UIS, HUGE, PRC, JLH.
Posted by MobyDick at 2016-01-25 06:29:00

Source: https://bitcointalksearch.org/topic/m.13679687

Edit: Please Retweet and Comment: https://twitter.com/Transfer_dev/status/693435767117381633



Just put in my request in.

Thank you very much avitas, your support is greatly appreciated.  Grin


Thank you BTC-BTC-BTC. Looks like you vote brought us up to 26.  Cool
legendary
Activity: 1582
Merit: 1001
www.neutroncoin.com
sr. member
Activity: 302
Merit: 250

I agree. I encourage everyone who has not put in a request at Poloniex yet, to do so. They are delisting 12 coins on February 8, 2016. I found the below in another thread.

https://poloniex.com/coinRequest

On 2/8/2016, the following markets will be delisted: CMNT, HIRO, NXTI, XAI, CHA, OPAL, CYC, URO, UIS, HUGE, PRC, JLH.
Posted by MobyDick at 2016-01-25 06:29:00

Source: https://bitcointalksearch.org/topic/m.13679687

Edit: Please Retweet and Comment: https://twitter.com/Transfer_dev/status/693435767117381633



Just put in my request in.
legendary
Activity: 1504
Merit: 1002
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin

Having a hard time syncing a new wallet.  I tried the bootstrap and instructions and it did nothing.  I have been syncing over 10 hours and am still at 16 weeks behind.  I have 30 connections but the blocks are coming in so slow.  Is there a technique I should try?

edit: Just added maxorphanblocks=10000 - Will see if that helps.

edit2: ok much faster syncing - you may want to add maxorphanblocks=10000 to the OP transfer.conf?

Sure we can add that to the OP. It will also be coded into the wallets with the next release of wallets. Those will be out February 1st - 3rd.  Also Infernoman was testing sync times lastnight with new code. The tests looked good from his end, he is just finalizing some adjustments.

Thanks for your continued support pokeytex.  Grin

Thank you for dealing with my noob questions!

Man what a difference maxorphanblocks=10000 makes! Damn near done syncing!
legendary
Activity: 952
Merit: 1000
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin

Having a hard time syncing a new wallet.  I tried the bootstrap and instructions and it did nothing.  I have been syncing over 10 hours and am still at 16 weeks behind.  I have 30 connections but the blocks are coming in so slow.  Is there a technique I should try?

edit: Just added maxorphanblocks=10000 - Will see if that helps.

edit2: ok much faster syncing - you may want to add maxorphanblocks=10000 to the OP transfer.conf?

Sure we can add that to the OP. It will also be coded into the wallets with the next release of wallets. Those will be out February 1st - 3rd.  Also Infernoman was testing sync times lastnight with new code. The tests looked good from his end, he is just finalizing some adjustments.

Edit: Hypermist said fresh wallets syncing amazingly fast, on his test machine just now. Getting 9.3k blocks in less than 2mins. Not sure why your experience would be different. but I just wanted to followup. As long as your syncing, that is what matters the most to me.  Grin

Thanks for your continued support pokeytex.  Grin
legendary
Activity: 1504
Merit: 1002
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin

Having a hard time syncing a new wallet.  I tried the bootstrap and instructions and it did nothing.  I have been syncing over 10 hours and am still at 16 weeks behind.  I have 30 connections but the blocks are coming in so slow.  Is there a technique I should try?

edit: Just added maxorphanblocks=10000 - Will see if that helps.

edit2: ok much faster syncing - you may want to add maxorphanblocks=10000 to the OP transfer.conf?
legendary
Activity: 952
Merit: 1000
And now we have 24 votes Smiley

I just signed up.....

Thank You very much. I am going to push pretty hard today for them to add Transfercoin.


Excellent. Now poloniex needs to wake up

I agree. I encourage everyone who has not put in a request at Poloniex yet, to do so. They are delisting 12 coins on February 8, 2016. I found the below in another thread.

https://poloniex.com/coinRequest

On 2/8/2016, the following markets will be delisted: CMNT, HIRO, NXTI, XAI, CHA, OPAL, CYC, URO, UIS, HUGE, PRC, JLH.
Posted by MobyDick at 2016-01-25 06:29:00

Source: https://bitcointalksearch.org/topic/m.13679687

Edit: Please Retweet and Comment: https://twitter.com/Transfer_dev/status/693435767117381633

hero member
Activity: 700
Merit: 500
Founder of CoExistCoin
Excellent. Now poloniex needs to wake up
legendary
Activity: 1834
Merit: 1006
And now we have 24 votes Smiley

I just signed up.....
legendary
Activity: 952
Merit: 1000
We have moved to the top of the list at Safecex with 23 Votes. I appreciate everyone going out and voting for Transfercoin. If you haven't voted please do. I am in the troll box there promoting with others. Please use the link below. You do have to create an account to vote.  Grin

https://safecex.com/coin/add?q=TX



I received an email from 1ex.trade. They just need to verify Infernoman by a form of ID and they will get us listed. Below is the email I received from them.  Grin

We had a look at the data provided.
To do the final verification the coin developer must be verified now. A form of ID e.g. driver license is needed. A copy should be attached to this ticked.

Once we have received this and all is ok the coin will be listed

Regards

1EX Support Team
legendary
Activity: 952
Merit: 1000
We have a Transfercoin bootstrap for wallets. Great community, hypermist, member in our IRC channel made this for us. Download it from the link below and try it out.

https://mega.nz/#!LUsgFADJ!_7XYY7rK-detyQYA6nDrqYoLZFkqtERugV67psQbpIg

How to use it.

1. Download and install the Windows Transfercoin wallet software, run it and then close it.

2.Copy the bootstrap.dat file in the folder \Users\YOUR_WINDOWS_USERNAME\AppData\Roaming\Transfercoin

3. Run the Transfercoin wallet software to import most of the blockchain locally and then to download only the rest and synchronize the client.

Give us your feedback. Be sure to thank hypermist in IRC with some tips or twitter. @HypermistX

Edit. Corrected file path name.

Edit: Directions from here: http://cryptomining-blog.com/tag/bootstrap-dat/. Not sure if there is anything different that needs to be done. Let me know if so.  Grin
legendary
Activity: 952
Merit: 1000
sent 300 TX from my pc wallet to my android wallet. Showed up in a blink of an eye Grin Grin Kiss

That is great to hear. Your feedback has been great limaphii.  Grin
hero member
Activity: 700
Merit: 500
Founder of CoExistCoin
sent 300 TX from my pc wallet to my android wallet. Showed up in a blink of an eye Grin Grin Kiss
hero member
Activity: 700
Merit: 500
Founder of CoExistCoin
It took 4 hours. It is fully downloaded woohoo. Im not sure if its really feasible to run a master node on my android but I want to give it a try. Have to mive some funds around and stuff and buy 10k more TX  Wink Wink
legendary
Activity: 964
Merit: 1000
I'll be testing out the android wallet on my archaic sony tablet s later if I get a chance. I'm curious as to why it's taking so long to download the blockchain. Maybe maxorphans=XXX could help on the android?

The QT on android seems to take a bit longer to download the blockchain. I've done a lot of work to help increase the speed of the blockchain sync but it does still need some addressing for slower devices like the androids, r-pi's and some older PC's. I'm always looking for ways to help increase the speed of the blockchain sync and have done quite a bit to help increase the speeds of the CheckBlock function which verifies the blocks as they are being downloaded.

There is a lot going on while the blockchain is downloading and its going to be different on each device based on their speed. At some point you will reach a limit where an increase in cpu speed wont yield a faster sync time. And thats when the blockchain download speed needs to be addressed.
legendary
Activity: 952
Merit: 1000
I'll be testing out the android wallet on my archaic sony tablet s later if I get a chance. I'm curious as to why it's taking so long to download the blockchain. Maybe maxorphans=XXX could help on the android?

Infernoman coded peers, and i believe since the Android wallet is built with QT, that would be there. He wanted to get as many updates as possible in the new wallet, and downloading the chain was at the top.
Jump to: