Author

Topic: [TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH - page 152. (Read 317998 times)

legendary
Activity: 966
Merit: 1001
legendary
Activity: 964
Merit: 1000
Just got off the phone with the darksilk dev after a 12 hour skype call. To say the least we got a LOT done today. another 1000+ lines of code, and working our way further into the dash commit.
legendary
Activity: 964
Merit: 1000

As an observation, the dashboard has a darksend balance and I am using clearnet not the darknet, is that ok?

There are three buttons (well assume they are buttons, I can't access them while it's sync'ing), do you have any information on the darkside of the wallet?



I'm not quite sure how to use darksend currently. The UI for it was disabled before these builds but from what i can tell everything is there. I wanted to enabled it for users that might know a bit more about it. There are still a few things that need to be integrated to make it easier to use. One of the things i need to do is add an identifier to anon coins in your coin control. Currently there is no way to tell which coins inputs have been mixed, and therefore no way to send them properly.

I am starting to work my way into the Dash core and have found where the old core developers pretty much gave up. I will be working from there to improve our code, which should help with how the masternodes are handled and to features relating to darksend.
member
Activity: 91
Merit: 10

As an observation, the dashboard has a darksend balance and I am using clearnet not the darknet, is that ok?

There are three buttons (well assume they are buttons, I can't access them while it's sync'ing), do you have any information on the darkside of the wallet?

member
Activity: 91
Merit: 10

Thanks for that, I renamed the transfer folder in appdata and created a new empty transfer folder. Copied the old wallet.dat into this folder and ran up the new wallet, it's syc'ing now and seems to be all there.

Thought I could get away without re-sync'ing but not a problem.

legendary
Activity: 952
Merit: 1000
I have downloaded the new windows wallet and I am having problems getting it to load using my existing wallet database. The new wallet generates a windows exception error. If I rename the existing database, allowing  the new wallet to recreate the database with a new wallet address, it loads fine and begins sync'ing.

Sending my coins from my old wallet to this new wallet is a solution but then I would have to perform coin control to re-block the coins and I'll have to wait for them to mature before staking.

Any thoughts
 

What I did was is backup the wallet.dat.  I renamed the old Transfer folder under C:\Users\myusername\AppData\Roaming to TranferV1.1.  I then ran the new wallet setup.  The reason I did it this was is because the txleveldb has to be rebuilt because of the updates.  When you run the new setup it will recreate the Transfer folder in that directory.  The new wallet requires a full sync, and this was the easiest way to do it.
member
Activity: 91
Merit: 10
I have downloaded the new windows wallet and I am having problems getting it to load using my existing wallet database. The new wallet generates a windows exception error. If I rename the existing database, allowing  the new wallet to recreate the database with a new wallet address, it loads fine and begins sync'ing.

Sending my coins from my old wallet to this new wallet is a solution but then I would have to perform coin control to re-block the coins and I'll have to wait for them to mature before staking.

Any thoughts
 
legendary
Activity: 1106
Merit: 1004
No risk, no fun!
Guys I am in! I like the ugly faces here! :-D

greetz
Meta
legendary
Activity: 952
Merit: 1000
Please retweet  Grin

https://twitter.com/Transfer_dev/status/655546761281298432



Here is a zip file of Transfercoin Media Images.  If you would like to use them in tweets or other social media posts please do, it would be greatly appreciated.  Grin  Infernoman please add to OP.  Thanks  Cool

https://mega.nz/#!bZtz3SDJ!3diA1LiyTUbuVKiu8URMVPhn1OxXeXQm0OmOQF8iEUU

legendary
Activity: 964
Merit: 1000
i am still interested of doing the German thread translation for the offered bounty of 2500 TX. Let me know if the job is still available Wink

Definitely ! I've only got the mac wallet left to release, so if you do it now i would need you to add the links to the new mac wallet afterward. But I will gladly follow through with any open bounties.

I just got confirmation that yobit is getting ready for the fork aswell, The only one left to switch is the block explorer. And from what i know of Crypto ID is on temporary leave. I'm HOPING he will be back before the fork, but if it comes down to it I can bring a block explorer online before then.
tyz
legendary
Activity: 3360
Merit: 1533
i am still interested of doing the German thread translation for the offered bounty of 2500 TX. Let me know if the job is still available Wink
legendary
Activity: 964
Merit: 1000
I really like how infernoman managed the takeover of TX.  Good luck with it hopefully you will bring it to a position where it belongs

Thanks for the good words, I've been working hard this these past 2 weeks to bring everything up to date, and to fix a few problems that are occuring. The PosV3 modifier will help with the difficulty fluctuation, and the fork will also decrease the block time to 60 second block time the OP states.

The cross sending feature will help with using TX and in my opinion is better than having mechant services. But I'm open to opinions about that. What I'm thinking is its going to be harder to convince merchants to integrate us into their platform than it would be to have a cross sending service until its a viable option.

Currently there are not many masternodes online on the new client, and the masternodes that are online are receiving huge rewards, if you guys have some extra coins i highly advise you to get a masternode online and reap some of the rewards Wink

I'd also like to thank wigitgetit for all of his help with promotion Wink without promotion nobody knows we're here ! So tweet, facebook, instagram, text, email. Whatever you can do to get the word out? DO IT ! Thats how you guys can help !



The linux QT binaries are here ! For anyone who would like to test out the cross sending and withdrawing from bittrex feel free to do so. I need a few more people to help test out the feature to see if anyone can find any issues, I went through and tested and was able to withdraw quite comfortably to the bitcoin address specified.
https://www.dropbox.com/s/4oy2dgw45d8apsk/transfer-qt-V1.2-61401-Linux?dl=0
hero member
Activity: 686
Merit: 500
I really like how infernoman managed the takeover of TX.  Good luck with it hopefully you will bring it to a position where it belongs
legendary
Activity: 952
Merit: 1000
how to get TX for free ?

Also don't forget to enter to win a Free Masternode Here https://gleam.io/9HnMj/transfercoin-masternode-give-away

Don't forget to get your Free $TX http://www.free-crypto.com/tx/
hero member
Activity: 546
Merit: 500
how to get TX for free ?
legendary
Activity: 952
Merit: 1000
Only 1 active connection to Transfer network ?

Good job guys Smiley

I've got 6 here myself, it all depends on where you are located. Personally I have at least 10 different nodes online in 4 different locations in Canada.

if you'd like some more nodes

addnode=mn.infernopool.com:10000
addnode=transfer.infernopool.com:7556
addnode=transfer.infernopool.com:1000
addnode=transfer.infernopool.com:1001
addnode=transfer.infernopool.com:1002
addnode=transfer.infernopool.com:1003
addnode=transfer.infernopool.com:1004
addnode=transfer.infernopool.com:1005
addnode=transfer2.infernopool.com:9999
addnode=transfer2.infernopool.com:9998
addnode=transfer2.infernopool.com:9997
addnode=transfer2.infernopool.com:9996
addnode=transfer2.infernopool.com:9995
addnode=transfer2.infernopool.com:9994

it helps if you add listen=1 to your .conf file. ALSO these clients were built without upnp enabled. So forwarding your p2p port in the router to your PC also helps.

Heres a picture of the Cross-send feature. And a transaction ID to go with it.

https://chain.so/tx/BTC/39f746811cefb2b35b6ba52449a8b88532c19a966d328f9a99739854fd405307

If anyone would like to do a build of this they are more than welcome to.
the branch can be found at https://github.com/Infernoman/Transfercoin/tree/CS

That is really cool Infernoman, great work.  Your contributions have been awesome.

The multipool has paid a of 106,876.82634009 $TX. Get Started Here http://infernopool.com/getting_started

Also don't forget to enter to win a Free Masternode Here https://gleam.io/9HnMj/transfercoin-masternode-give-away

Don't forget to get your Free $TX http://www.free-crypto.com/tx/
legendary
Activity: 964
Merit: 1000
Only 1 active connection to Transfer network ?

Good job guys Smiley

I've got 6 here myself, it all depends on where you are located. Personally I have at least 10 different nodes online in 4 different locations in Canada.

if you'd like some more nodes

addnode=mn.infernopool.com:10000
addnode=transfer.infernopool.com:7556
addnode=transfer.infernopool.com:1000
addnode=transfer.infernopool.com:1001
addnode=transfer.infernopool.com:1002
addnode=transfer.infernopool.com:1003
addnode=transfer.infernopool.com:1004
addnode=transfer.infernopool.com:1005
addnode=transfer2.infernopool.com:9999
addnode=transfer2.infernopool.com:9998
addnode=transfer2.infernopool.com:9997
addnode=transfer2.infernopool.com:9996
addnode=transfer2.infernopool.com:9995
addnode=transfer2.infernopool.com:9994

it helps if you add listen=1 to your .conf file. ALSO these clients were built without upnp enabled. So forwarding your p2p port in the router to your PC also helps.

Heres a picture of the Cross-send feature. And a transaction ID to go with it.

https://chain.so/tx/BTC/39f746811cefb2b35b6ba52449a8b88532c19a966d328f9a99739854fd405307

If anyone would like to do a build of this they are more than welcome to.
the branch can be found at https://github.com/Infernoman/Transfercoin/tree/CS
legendary
Activity: 1834
Merit: 1006
Only 1 active connection to Transfer network ?

Good job guys Smiley
legendary
Activity: 964
Merit: 1000
I have been working on the QT and will be starting to implement new features into the trading page, The Buy / Sell tab have been integrated into a single tab to make more room for future improvements. Cross sending will be easier to implement now that we have a trading tab and I will be working on the UI to implement cross sending for the next update. I will also be adding a withdraw from bittrex method into the wallet, so that your able to withdraw any TX from bittrex to your local wallet. All of this will be password protected, so your wallet will need to be unlocked AND your API keys from bittrex put into the settings.

good work, keep with these updates ! Smiley

I was able to get most of the work done on the cross sending last night i just want to test everything to make sure my calculations arent off at all. Both cross sending and withdrawing will require that your wallet be unlocked. To explain a bit about how it works, and the best methods to use this.

Cross sending will use your available TX balance at bittrex to sell and receive bitcoin.
The picture below isnt great but it will help me explain.

https://usercontent.irccloud-cdn.com/file/D9373ASF/1445029017.JPG

At the top you will see your available TX on Bittrex, a "max" button which will input the max amount of bitcoin you can receive for selling ALL of your TX on Bittrex. Below that is the input for the BITCOIN address, the total you will receive AFTER the 0.0002 withdrawal fee, and the lowest price at which you will sell your TX.

As you change the amount you want to receive in Bitcoin, you will also be able to see the Total w/ Fees change. So the same as Bittrex, if I want to receive 0.1 BTC I would enter 0.1002 as the amount, and an address to withdraw too. When you click "Send" it will check to make sure your wallet is unlocked, Dump the TX for BTC and transfer the TX to the address specified.


The withdraw TX method was added to the "Balance" tab, So you will be able to withdraw any TX you purchase from Bittrex using the API to your own wallet. Unlike before where you still had to logon to Bittrex after you bought coins.

ALL of this will be done through YOUR bittrex account, So if you are storing TX on bittrex, I highly recommend to have 2fa enabled.
sr. member
Activity: 358
Merit: 251
I have been working on the QT and will be starting to implement new features into the trading page, The Buy / Sell tab have been integrated into a single tab to make more room for future improvements. Cross sending will be easier to implement now that we have a trading tab and I will be working on the UI to implement cross sending for the next update. I will also be adding a withdraw from bittrex method into the wallet, so that your able to withdraw any TX from bittrex to your local wallet. All of this will be password protected, so your wallet will need to be unlocked AND your API keys from bittrex put into the settings.

good work, keep with these updates ! Smiley
Jump to: