Received my 2 ants yesterday evening.
I had no problem with tracking, for some reason I have found http://www.trackitonline.ru/ to work quite well for general tracking.
Sadly I didn't have time to recompile cgminer in ubuntu, so only around 800MH/s at the moment.
Today I shall do it.
Topic: U1 antminer USB sticks 0.08 unit (500/500 sold) COMPLETE - page 3. (Read 18224 times)
The actual delivery wasn't a problem, just the inaccuracy of the tracking, sometimes it didn't work and all the error messages were in Dutch - even on the apparently 'English' site.
As for the receipt, I'm not too bothered as it's not too big an amount, so I don't need anything immediate. In a few days or so would be nice if possible.
Also, how can I leave you 'trust' the green stuff +5 underneath your profile picture in posts, and how do others leave me trust?
As for the receipt, I'm not too bothered as it's not too big an amount, so I don't need anything immediate. In a few days or so would be nice if possible.
Also, how can I leave you 'trust' the green stuff +5 underneath your profile picture in posts, and how do others leave me trust?
Okay, my antminers are now hashing well with my raspberry pi! Yay!
Thank you to the seller for providing a legitimate, reasonably priced product in good time. The only thing that could have improved is your choice of courier
Also, one last thing, did you check the receipt and cost for the packaging and post fee?
Thank you to the seller for providing a legitimate, reasonably priced product in good time. The only thing that could have improved is your choice of courier
Also, one last thing, did you check the receipt and cost for the packaging and post fee?
postage reciepts actually contain no valur just tracking details.
i just get one giant long reciept for each transaction cost from the clerk, so its hard/impossibke to tell without sitting down and going over things.
PostNL have shown me no problems in the past when sending all over the world.
My guess would be the busy mail season made the UK handler pass deliveries onto a third party..... the dreaded yodel.
Okay, my antminers are now hashing well with my raspberry pi! Yay!
Thank you to the seller for providing a legitimate, reasonably priced product in good time. The only thing that could have improved is your choice of courier
Also, one last thing, did you check the receipt and cost for the packaging and post fee?
Thank you to the seller for providing a legitimate, reasonably priced product in good time. The only thing that could have improved is your choice of courier
Also, one last thing, did you check the receipt and cost for the packaging and post fee?
Got my miners. 
Thanks
And mining away...
Thanks elasticband
Thanks
And mining away...
Thanks elasticband
I also managed to pick them up today.
Nicely packaged, I love the boxes.
And the weight of these bad boys.. Yeah.
Nicely packaged, I love the boxes.
And the weight of these bad boys.. Yeah.
elasticband, got my miners. Cheers mate
DO you have any antminers left behind ? I'd like to get some!
Check your email.
sorry but I see only:
I don't have a barcode or something... 
Code:
The tracking number should only contain numbers and letters (3SABC123456789)
No barcode filled in
TNT is so slow here... 
Still on transport...
Still on transport...
Just to confirm that these things work MUCH better using bfgminer.
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
nwools has a custom version, but It fails to load on my win8.1x64, I'm not to keen on loading on my win7x86 as it will sc**w my erupters.
you can run more than one instance of bfgminer in my experience. Start your BE's with one, then start the U1's with the other.
Just fixed up my orico hub so now I can try with 2nd instance, now I can power off separately.
Hi Guys,
Thanks for pointing me to Slush's pool, im getting a nice average of 11.71Gh/s from my 6 Antminers... and the stats are showing. No idea what was wrong with Multipool, looks like a wasted half a day mining for free!
Thanks for pointing me to Slush's pool, im getting a nice average of 11.71Gh/s from my 6 Antminers... and the stats are showing. No idea what was wrong with Multipool, looks like a wasted half a day mining for free!
Just to confirm that these things work MUCH better using bfgminer.
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
nwools has a custom version, but It fails to load on my win8.1x64, I'm not to keen on loading on my win7x86 as it will sc**w my erupters.
you can run more than one instance of bfgminer in my experience. Start your BE's with one, then start the U1's with the other.
Just to confirm that these things work MUCH better using bfgminer.
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
nwools has a custom version, but It fails to load on my win8.1x64, I'm not to keen on loading on my win7x86 as it will sc**w my erupters.
Just to confirm that these things work MUCH better using bfgminer.
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Can you link me to the thread please.
And also will bfgminer work on Raspberry Pi.
Just to confirm that these things work MUCH better using bfgminer.
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
Check out the bfgminer thread, nwoolls has a custom version posted there. I'm getting 16GH from my 10 units, compared to 11GH when running them on cgminer.
Full support should be there in the next version of bfgminer (which is due real soon).
received them today (well..my neighbor..)
all are working fine (i have to plug them in one after another while cgminer is started.. but thats fine for today)
thanks elastic!
all are working fine (i have to plug them in one after another while cgminer is started.. but thats fine for today)
thanks elastic!
Cool thanks, will check it out. Have been using multipool but my stats havent updated since i began 8 hours ago
Seems weird, so i will change pool.
I've only even mined scrypt up to this point, so sha256 is an interesting change!
Seems weird, so i will change pool.
I've only even mined scrypt up to this point, so sha256 is an interesting change!
slush is cool unless you have disconnect issues
Jump to: