Hi there,
will the be more antminers available?
Kind regards
Andreas
Topic: U1 antminer USB sticks 0.08 unit (500/500 sold) COMPLETE - page 2. (Read 18267 times)
How do I overclock my U1 ANtminer with minepeon. My "rig" includes one block erupter, two red furies, one jalapeno.
I don't recommend Minepeon for antminer u1.
Not only is minepeon a small distro (meaning you can't do anything but mine on the rPi), there is no command line interface.
To overclock, you need to change the --bmsc-options in cgminer.
I suggest you load up raspbian onto an sd card, set it up, install cgminer and then you can overclock, and also do other things on the rpi (programs, games, internet)
The beauty is, the CPU usage of cgminer in raspbian is minimal, so in essence, your rpi is completely free to do other things on top of mining
How do I overclock my U1 ANtminer with minepeon. My "rig" includes one block erupter, two red furies, one jalapeno.
Received the miner and it works, all good!
Hi elasticband
please send me the tracking number
because I am working full day and have to redirect it to accept it...
thx
edit:
it arrived
please send me the tracking number
because I am working full day and have to redirect it to accept it...
thx
edit:
it arrived
Maybe the parcel has gotten a new DPD code, can you ask your post company? Strange that delivery has taken so long and is untrackable!
This is why I might need tracking info, the delivery might bounce othervise!
I have given you tracking info.
As mentioned a couple of post previous, i checked your tracking the second time i gave you the correct number. It worked and was registered in the system.
Now i check it nothing happens
All i can ask is you wait until mid week and i will have to process you a refund, sorry for the delay but i am not the mail handler.
maybe if i was all units would make it safe...
Your ordder finally arrived?
Yes.any visible problems with the label that they sent it wrong place?
No. All fine. Think the mailman was drunken. Don't know... 
it's really strange.
One order portugal, similar to yours but arrived quick, mail had wrong address.
sweeden - single unit, not arrved yet.
Netherlands one box arrived with an extra three tracking numbers attached and it was about 5 days over due.
Denmark order returnred to sender due to incomplete address
all i can say is this is the worst the mail service have ever done for me.....
pretty sure the rest have arrived.
This is why I might need tracking info, the delivery might bounce othervise!
Your ordder finally arrived?
Yes.any visible problems with the label that they sent it wrong place?
No. All fine. Think the mailman was drunken. Don't know... My order arrived yet (to germany)
Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"
Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"
Your ordder finally arrived?
any visible problems with the label that they sent it wrong place?
My order arrived yet (to germany)
Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"
Tracking at http://www.trackitonline.ru sayes first "Unsuccessful delivery attempt. Insufficient or incorrect address" and it's "Parcel delivered to addressee with digital proof of acceptance"
The tracking code you sent me does not work and I have not received the USB miner!
Please PM a working tracking number.
Please PM a working tracking number.
Hello sir,
Sorry to hear it has not arrived yet. When i gave you the correct tracking number the second time i checked it and it worked and appeared in the system. Now when i check it, it does not.
All i can say is wait until mid next week and i guess i will refund you if it does not arrive as it is only one unit.
again sorry for the delay, but i am not the mail handler. Your order was placed in a bubble envelope with a printed label, i don't really know what i could have done differently.
peace
I can second this. My order arrived in a bubble envelope. However, my tracking information was bad and often inaccessible. Elasticband is very legit and could have easily scammed me on my first order if he had wanted too. If he wanted to make money scamming, he'd have done it with a bigger order!
I hope all your orders arrive!
The tracking code you sent me does not work and I have not received the USB miner!
Please PM a working tracking number.
Please PM a working tracking number.
Hello sir,
Sorry to hear it has not arrived yet. When i gave you the correct tracking number the second time i checked it and it worked and appeared in the system. Now when i check it, it does not.
All i can say is wait until mid next week and i guess i will refund you if it does not arrive as it is only one unit.
again sorry for the delay, but i am not the mail handler. Your order was placed in a bubble envelope with a printed label, i don't really know what i could have done differently.
peace
The tracking code you sent me does not work and I have not received the USB miner!
Please PM a working tracking number.
Please PM a working tracking number.
You have the wrong cgminer version. Currently it's only supported in the modified one from bitmain. You can get it here: https://github.com/bitmaintech/cgminer/ as source code, or here https://github.com/AntMiner/AntGen1/tree/master/cgminer as binary directly from bitmain.
Good evening,
I hope you can help me guys
I mining on a raspberry Pi with self complimented CGMiner 3.9.0
I hope the follow settings are OK to run my new 9 miners @ 2 GH/S next week?
First install:
git clone https://github.com/bitmaintech/cgminer.git
cd /usr/src/cgminer-3.9.0
./autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure --enable-bmsc
make
start:
screen -S mine
cd /usr/src/cgminer-3.9.0
cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0981
Thanks for your help.
greets
I hope you can help me guys
I mining on a raspberry Pi with self complimented CGMiner 3.9.0
I hope the follow settings are OK to run my new 9 miners @ 2 GH/S next week?
First install:
git clone https://github.com/bitmaintech/cgminer.git
cd /usr/src/cgminer-3.9.0
./autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure --enable-bmsc
make
start:
screen -S mine
cd /usr/src/cgminer-3.9.0
cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0981
Thanks for your help.
greets
Always when I will start the miners:
cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0881
root@sunwatch:/usr/src/cgminer-3.9.0# cgminer --bmsc-options 115200:20 --config /home/pi/cgminer-asic.conf --quiet --usb :9 --bmsc-freq 0881
[2014-01-10 20:07:11] cgminer: --bmsc-options: unrecognized option
What is the wrong command thanks for help and @elasticband thanks for the good and 1A transaction!
greets
recieved on monday! Thanks make, gunna give you +rep
I needed to reinstall ubuntu again and rebuild cgminer with instructions from https://bitcointalksearch.org/topic/bitmain-antminer-u1-tips-tricks-390929
OC with freq = 0981 and I have steady ~2GH/s
OC with freq = 0981 and I have steady ~2GH/s
Received my 2 ants yesterday evening.
I had no problem with tracking, for some reason I have found http://www.trackitonline.ru/ to work quite well for general tracking.
Sadly I didn't have time to recompile cgminer in ubuntu, so only around 800MH/s at the moment.
Today I shall do it.
I had no problem with tracking, for some reason I have found http://www.trackitonline.ru/ to work quite well for general tracking.
Sadly I didn't have time to recompile cgminer in ubuntu, so only around 800MH/s at the moment.
Today I shall do it.
Thank you for the tip, the tracking info is at least a little more detailed
Anyone still waiting i suggest tracking using the above mentioned site. http://www.trackitonline.ru/
Jump to: