ALL UNICORN HASHER CUSTOMERS HOSTED AND LEASED:
LeaseRig.net will serve as the customer monitoring and management portal after integration is complete next week: https://bitcointalksearch.org/topic/ann-leaserignet-rent-hire-scryptjanenfactorsha3sha256x11-hashpower-544732
Topic: UnicornHasher Deal #4 GridSeed Discount or Hosted GridSeed $225 (Read 5237 times)
Round two is up. There is one available and one voltage modded gridseed running at ~400Kh/s at 1000mhz available.
Can you point me to this mod and how it was done??
https://bitcointalksearch.org/topic/gridseed-5-chip-usb-miner-voltage-mod-519112
Wolfey has done some extended mods in the guide thread linked in my signature.
Round two is up. There is one available and one voltage modded gridseed running at ~400Kh/s at 1000mhz available.
Can you point me to this mod and how it was done??
Hi,
I'd like to purchase 10x L1 option.
I'd like to purchase 10x L1 option.
It was removed from the OP again!
There is a 1 per customer and limited quantity per round available for the L1 option. I can do one lease and 9 hosted or just one lease. Let me know. I'll fix the OP again.
OK, please cancel my order.
I PM'd you that was going to open up bulk leases. If you are still interested in QTY 10 let me know.
I would be very interested in the Bulk Lease option of 10 - 20 or maybe more...
Let me know what the prices are please!
/\/\/\
There is a whole board for speculation on the forum. Everyone has a different ROI calculator and opinion so this isn't the place.
I've been asked several times now so I'll put it out here: If you want more than 100 gridseeds setup and running at your location I can get everything setup DOA tested and ship to you or fly out and setup everything for around $200-$210 + travel per seed depending on what types of accessories you are looking for.
I prefer old used PC's converted to linux for the controller however if you want more than 100 seeds I could do a micro-atx cube build with 5 host controllers to control up to 500 seeds from one unit. Raspberry PI's will work fine if you use 1 per 10-50 devices and only run one instance of cgminer per system. CPUminer seems to work a bit better on the PI for quantity.
There is a whole board for speculation on the forum. Everyone has a different ROI calculator and opinion so this isn't the place.
I've been asked several times now so I'll put it out here: If you want more than 100 gridseeds setup and running at your location I can get everything setup DOA tested and ship to you or fly out and setup everything for around $200-$210 + travel per seed depending on what types of accessories you are looking for.
I prefer old used PC's converted to linux for the controller however if you want more than 100 seeds I could do a micro-atx cube build with 5 host controllers to control up to 500 seeds from one unit. Raspberry PI's will work fine if you use 1 per 10-50 devices and only run one instance of cgminer per system. CPUminer seems to work a bit better on the PI for quantity.
Ive been researching the GridSeed and I have a general question. At 360 kh/s you will generate around 22.4 Lightcoin a year. Thats roughly $375 a year in USD. Are you guys speculative mining hoping LTC goes up in price over time? I don't see how much money can be made with these machines.
Sounds like good progress cant wait to test it out my self and have control.
One hosted and one leased units are dead. I have a total of four dead units from the last batch.
The next batch is 22 arriving Monday. I've PM'd both parties and offered options including a full refund (one was from batch one with hosting starting on 3/3)
This last batch had a rash of bad hardware. DOA miners, bad power connectors and missing USB cables.
The alpha of pool management was tested and works for pool management and monitoring.
If anyone wants their HOSTED unit voltage modded to run at 400Kh/s we will bear the risk of killing the unit and mod it for you!
I have never charged for overclocking and grids are no different.
It will void your warranty IE if the unit works after the mod but dies after 24 hours it's on you.
Due to the rash of bad hardware I will not be offering new hosted or leased units until everything is running. Due to the issue with cgminer and the Pi I may change the pricing structure to be lower!
The next batch is 22 arriving Monday. I've PM'd both parties and offered options including a full refund (one was from batch one with hosting starting on 3/3)
This last batch had a rash of bad hardware. DOA miners, bad power connectors and missing USB cables.
The alpha of pool management was tested and works for pool management and monitoring.
If anyone wants their HOSTED unit voltage modded to run at 400Kh/s we will bear the risk of killing the unit and mod it for you!
I have never charged for overclocking and grids are no different.
It will void your warranty IE if the unit works after the mod but dies after 24 hours it's on you.
Due to the rash of bad hardware I will not be offering new hosted or leased units until everything is running. Due to the issue with cgminer and the Pi I may change the pricing structure to be lower!
OK
Everything is worked out. New hardware is shipping next day air. I'm going to have to trash the Pi's and run these on linux boxes so I'll get those ordered up as well.
The leased units from the first hosted deal will be moving in with these over the weekend and then hopefully it can go in the rack with it's buddies.
Next round delivery is scheduled for Monday.
Looks like a power cord went bad and the issue with running individual cgminer instances on the Pi.
Everything is worked out. New hardware is shipping next day air. I'm going to have to trash the Pi's and run these on linux boxes so I'll get those ordered up as well.
The leased units from the first hosted deal will be moving in with these over the weekend and then hopefully it can go in the rack with it's buddies.
Next round delivery is scheduled for Monday.
Looks like a power cord went bad and the issue with running individual cgminer instances on the Pi.
It's looking like a batch of bad cables. I'm rebuilding now and then I'll swap out cables and test.
Looks like it's four units affected. I'll payout for lost time once everything is settled.
More to follow
Looks like it's four units affected. I'll payout for lost time once everything is settled.
More to follow
Something's wrong with mine as well, it's not showing up on multipool, 0 accepted shares. Do these things even work with multipool?
Yes they should work no problem.
cool...dunno wtf the problem is
gonna try a different worker that I know works. Something's wrong with mine as well, it's not showing up on multipool, 0 accepted shares. Do these things even work with multipool?
Yes they should work no problem.
Something's wrong with mine as well, it's not showing up on multipool, 0 accepted shares. Do these things even work with multipool?
my worker is only showing
1,094.60 KH/s
For last hour when i should have
6 x device running.
1,094.60 KH/s
For last hour when i should have
6 x device running.
Let me know if you are not seeing a similar hashrate at your pool.
The 420Kh/s device is my voltage modded GridSeed. It is showing 420-430 at the poolside. The issue last night was a defective raspi so I'll be replacing it when these get racked over the weekend.
BTW That's 420Kh/ash with 0 HW errors
Round two is up. There is one available and one voltage modded gridseed running at ~400Kh/s at 1000mhz available.
There were two pool issues. The rest are online. I'll PM your serial numbers tomorrow.
Miners are started via serial number and physically labeled so you don't just have one grid in a farm you have an actual miner:
EDIT: Miners are down for the night and will be up in 12 hours. Looks like there is still a bug somewhere. I'll be swapping to cpuminer like the rest of the leased units.
There were two pool issues. The rest are online. I'll PM your serial numbers tomorrow.
Miners are started via serial number and physically labeled so you don't just have one grid in a farm you have an actual miner:
EDIT: Miners are down for the night and will be up in 12 hours. Looks like there is still a bug somewhere. I'll be swapping to cpuminer like the rest of the leased units.
The following will be online tonight for initial testing. If you have not sent in your pool information yet please do so. The client management/monitoring interface should be online sometime next week so you can manage your pools and monitor your leases/hosted devices.
5 H1 rob1313
1 H1 mudge
1 L1 rob1313
1 L1 lazlopanaflex
The next round will arrive in 2-4 business days.
5 H1 rob1313
1 H1 mudge
1 L1 rob1313
1 L1 lazlopanaflex
The next round will arrive in 2-4 business days.
set me up with 5 units under 'L1' option.
The "LIMITED AVAILABILITY" includes 1 per customer.
I can set you up for 1 x L1?
EDIT: I'll update the OP as well.
ok 1 it is. Do you think there will be the ability too add more in the future?
Im sorry i go with 5 units under h1. and 1 unit under l1
For your 1L1
$65 0.1064BTC
1UHvEVriddkgG6MckNxH2a9NdCSSKUbYS
payment sent.
set me up with 5 units under 'L1' option.
The "LIMITED AVAILABILITY" includes 1 per customer.
I can set you up for 1 x L1?
EDIT: I'll update the OP as well.
ok 1 it is. Do you think there will be the ability too add more in the future?
Im sorry i go with 5 units under h1. and 1 unit under l1
For your 1L1
$65 0.1064BTC
1UHvEVriddkgG6MckNxH2a9NdCSSKUbYS
Hi,
I'd like to purchase Option L1, please. Thx
I'd like to purchase Option L1, please. Thx
$65 0.1064BTC
1UHbkic9pRfkFD9xKBVQKxwHLEHLKDLNy
Units scheduled for wednesday delivery
Status: 0/unconfirmed, broadcast through 14 nodes
Date: 3/18/2014 12:27
To: 1UHbkic9pRfkFD9xKBVQKxwHLEHLKDLNy
Debit: -0.1064 BTC
Net amount: -0.1064 BTC
Transaction ID: 2a97a2a9db9eb66ccd38de2a4fe503a3223a12ad2b1eff2b884a85a2bc46e1be
ok, ty sir
Jump to: