Pages:
Author

Topic: Unofficial Spondoolies SP20 thread - page 59. (Read 126204 times)

legendary
Activity: 3234
Merit: 1220
December 11, 2014, 05:44:11 PM
-snip-

 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:688) 28W  41A  74c] ASIC:[ 85c (125c) 895hz(BL: 895)    0 (E:193) F:0 L:0]

Going to ask this one is giving me hard time, yellow number + i see the hz gets blue, anyone know why it is ? and were its located in the box?

i'm going to put this out there now: if it's hashing at a good rate, don't look too deeply into the ASIC stats.
the SP31 i received today has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

i'm presuming it's probably just the ambient temperature in which i'm running it.
i wouldn't be overly concerned if I were you, however, I know Phil likes to go in depth, so he may be able to assist if you really want to get deep into the rabbit hole.

yes mines at 4.741TH so I'm not even going to look at it for a while Cheesy

have you estimated when we'll need to downclock? (i clearly have nothing better to do on a thursday night after watch some crap football)

Mines not in the UK so will be a different date to yours Cheesy
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 11, 2014, 05:40:07 PM
Quote
hmm, i'd offer but i fear Devon is a tad of a long drive in this weather.

7 hrs 47 mins ... 461.3 miles apparently.

The two SP20s I have underclocked also show a few yellow numbers but the stats cost per Ghs is good.



what I have found is if every asic is yellow under clocked you have reached the low point of the miner's ability to underclock.

It won't restart until you raise the volts a bit.
sr. member
Activity: 434
Merit: 250
December 11, 2014, 05:35:39 PM
Quote
hmm, i'd offer but i fear Devon is a tad of a long drive in this weather.

7 hrs 47 mins ... 461.3 miles apparently.

The two SP20s I have underclocked also show a few yellow numbers but the stats cost per Ghs is good.



naaaah by the time you get here that bottle will be tanned. save the fuel, find a 24hr supermarket.
sr. member
Activity: 471
Merit: 250
December 11, 2014, 05:33:35 PM
Quote
hmm, i'd offer but i fear Devon is a tad of a long drive in this weather.

7 hrs 47 mins ... 461.3 miles apparently.

The two SP20s I have underclocked also show a few yellow numbers but the stats cost per Ghs is good.

sr. member
Activity: 434
Merit: 250
December 11, 2014, 05:30:57 PM
-snip-

 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:688) 28W  41A  74c] ASIC:[ 85c (125c) 895hz(BL: 895)    0 (E:193) F:0 L:0]

Going to ask this one is giving me hard time, yellow number + i see the hz gets blue, anyone know why it is ? and were its located in the box?

i'm going to put this out there now: if it's hashing at a good rate, don't look too deeply into the ASIC stats.
the SP31 i received today has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

i'm presuming it's probably just the ambient temperature in which i'm running it.
i wouldn't be overly concerned if I were you, however, I know Phil likes to go in depth, so he may be able to assist if you really want to get deep into the rabbit hole.

yes mines at 4.741TH so I'm not even going to look at it for a while Cheesy

have you estimated when we'll need to downclock? (i clearly have nothing better to do on a thursday night after watch some crap football)
legendary
Activity: 3234
Merit: 1220
December 11, 2014, 05:28:59 PM
-snip-

 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:688) 28W  41A  74c] ASIC:[ 85c (125c) 895hz(BL: 895)    0 (E:193) F:0 L:0]

Going to ask this one is giving me hard time, yellow number + i see the hz gets blue, anyone know why it is ? and were its located in the box?

i'm going to put this out there now: if it's hashing at a good rate, don't look too deeply into the ASIC stats.
the SP31 i received today has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

i'm presuming it's probably just the ambient temperature in which i'm running it.
i wouldn't be overly concerned if I were you, however, I know Phil likes to go in depth, so he may be able to assist if you really want to get deep into the rabbit hole.

yes mines at 4.741TH so I'm not even going to look at it for a while Cheesy
sr. member
Activity: 434
Merit: 250
December 11, 2014, 05:14:09 PM
has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

True ... I have SP30s at http://toom.im/ and a SP31 that show many yellow ASICS ... keep calm and mine on ... they work fine! ... not that I get 200Ghs over as you are.

Need a drink ... single malt would do  Grin





hmm, i'd offer but i fear Devon is a tad of a long drive in this weather.
sr. member
Activity: 471
Merit: 250
December 11, 2014, 05:09:04 PM
has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

True ... I have SP30s at http://toom.im/ and a SP31 that show many yellow ASICS ... keep calm and mine on ... they work fine! ... not that I get 200Ghs over as you are.

Need a drink ... single malt would do  Grin



sr. member
Activity: 434
Merit: 250
December 11, 2014, 04:56:07 PM
-snip-

 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:688) 28W  41A  74c] ASIC:[ 85c (125c) 895hz(BL: 895)    0 (E:193) F:0 L:0]

Going to ask this one is giving me hard time, yellow number + i see the hz gets blue, anyone know why it is ? and were its located in the box?

i'm going to put this out there now: if it's hashing at a good rate, don't look too deeply into the ASIC stats.
the SP31 i received today has a bunch of low volt ASICS, but it's still performing at 4.7TH/s... if i wanted to, I could gradually up the voltages and get them to sit green but as far as i'm concerned, there is no need - it's performing 200TH/s above advertised spec.

i'm presuming it's probably just the ambient temperature in which i'm running it.
i wouldn't be overly concerned if I were you, however, I know Phil likes to go in depth, so he may be able to assist if you really want to get deep into the rabbit hole.
legendary
Activity: 3892
Merit: 4331
December 11, 2014, 04:49:41 PM
I've been going back and forth on whether to order these or the antminer s4.. My main concern has been the power supplies.. I have a couple of evga 1300 g2's..  I'm assuming you can run one of the sp20s on one 1300, but what kind of speed do you get and will the cabling on the g2's handle the constant load.. Im running 240v.

I had evga 1300's I had s-3's   so the upgrade path was easy ..  I run 5 s-3s and 5 sp20's  

I sold off some of my s-3's to make the room for the sp20's



You guys made me so so jealous...so i had to sell three S-3 (they still have nice bid in US) and bought one SP20 to try it out.
Among all of this info deluge nobody EVER posted dB vs watts in downclocking.
Is it only relevant for me? I doubt it, but will have to experiment myself.
If it is good, I can host four SP20 on two 15A/120V circuits, which would be awesome.

I don't think I will make money (in BTC), but don't really care because it basically became a hobby and coinbase makes it seamless to go dollars-bitcoin-order in bitcoins, so you never basically have them, just order in $$.
member
Activity: 85
Merit: 10
December 11, 2014, 04:43:54 PM
Can i fix it somehow with my IKEA allen key?
member
Activity: 85
Merit: 10
December 11, 2014, 04:40:12 PM
i'll maybe list 'em again tomorrow.
sipping whisky tonight.
 Grin

Enjoy it. I have one single malt coming to my door tomorrow too  Grin

Is that girl behind the bottle a Klimt?

yup, a proud IKEA purchase, as stated above (thanks Hunger)
in fact, most of my home is Swedish made and the only thing I don't own from Sweden is KfC mining rigs  Grin

i'll stick with my IKEA Klimts. lol


IKEA rocks! Cheesy love it


 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:688) 28W  41A  74c] ASIC:[ 85c (125c) 895hz(BL: 895)    0 (E:193) F:0 L:0]

Going to ask this one is giving me hard time, yellow number + i see the hz gets blue, anyone know why it is ? and were its located in the box?
sr. member
Activity: 434
Merit: 250
sr. member
Activity: 434
Merit: 250
December 11, 2014, 04:37:37 PM
i'll maybe list 'em again tomorrow.
sipping whisky tonight.
 Grin

Enjoy it. I have one single malt coming to my door tomorrow too  Grin

Is that girl behind the bottle a Klimt?

yup, a proud IKEA purchase, as stated above (thanks Hunger)
in fact, most of my home is Swedish made and the only thing I don't own from Sweden is KfC mining rigs  Grin

i'll stick with my IKEA Klimts. lol
legendary
Activity: 1904
Merit: 1007
December 11, 2014, 04:28:22 PM
i'll maybe list 'em again tomorrow.
sipping whisky tonight.
 Grin

Enjoy it. I have one single malt coming to my door tomorrow too  Grin

Is that girl behind the bottle a Klimt?
member
Activity: 85
Merit: 10
December 11, 2014, 04:19:04 PM
BTW got a couple of new fans to test Smiley



@ raskul I sold 3 s-3's I am just short of another sp20


i'll maybe list 'em again tomorrow.
sipping whisky tonight.
 Grin


Oh that girl behind the whiskey, had one of those but gave away couple of weeks ago IKEA!
sr. member
Activity: 434
Merit: 250
December 11, 2014, 04:16:38 PM
BTW got a couple of new fans to test Smiley



@ raskul I sold 3 s-3's I am just short of another sp20


i'll maybe list 'em again tomorrow.
sipping whisky tonight.
 Grin
newbie
Activity: 10
Merit: 0
December 11, 2014, 04:00:38 PM
I finally got one of these SP20's ordered up! I hope it lives up to Philip's praises  Cheesy I was hoping that I had a single PSU to run it, but now I am not so sure? I have several LEPA 1600's sitting around and some Corsair 1200AXi's. I suppose maybe dual CX750's would do the trick.

I got my SP20 last month and have been running it on 2 CX750M's.  Let me know if you want me to try any settings with it before deciding which power supply you are going to go with. 
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
December 11, 2014, 03:57:44 PM
BTW got a couple of new fans to test Smiley



@ raskul I sold 3 s-3's I am just short of another sp20

@ biffa
nice .  try to see if you can get a low clock and a low fan

my extreme under clock  can have a much lower fan setting 40




sr. member
Activity: 434
Merit: 250
December 11, 2014, 03:55:39 PM
-snip-
Pretty sure I am going to sell off my s-3's and go all sp20s.


i tried that but nobody in the UK wants 'em  Undecided may have to resort to ebay.
Pages:
Jump to: