Topic: Update Large review of Finksy/J4bbrwock server psus compared to ATXpsu-photos up - page 4. (Read 20932 times)
January 28, 2016, 09:43:33 PM
spacer for the photos
January 28, 2016, 09:37:21 PM
roll of butcher twine
the fans and the fan filters
ypu only need 1 of the two parts the none filter part. these are a perfect match same company
black pipe cleaners really work well
these labels face in
the fans and the fan filters
ypu only need 1 of the two parts the none filter part. these are a perfect match same company
black pipe cleaners really work well
these labels face in
January 28, 2016, 09:28:12 PM
look at post above now wait for it
here it is the tp roll
and here is the other end og the pcie cable
that string is butcher twine as the finksy/j4bberwock board does not attach to the bigger vent holes in the 2980
zip ties work but I did not have any long thin ones the back of these boards have exposed 12 volt power so non conductive ties are needed.
here it is the tp roll
and here is the other end og the pcie cable
that string is butcher twine as the finksy/j4bberwock board does not attach to the bigger vent holes in the 2980
zip ties work but I did not have any long thin ones the back of these boards have exposed 12 volt power so non conductive ties are needed.
January 28, 2016, 09:23:16 PM
Unscented cause my s-- don't stink! 
LMAO! Don't keep us in suspense too long here!
January 28, 2016, 09:15:45 PM
So that's the good 2 ply stuff! Scented or unscented?
Unscented cause my s-- don't stink!
yeah right.
Okay I got more photos. like 20 of them.
okay get a box this regional rate box a is close to perfect.
I use some duct foam/silver from frost king and some aluminum tape
January 28, 2016, 07:49:03 PM
So that's the good 2 ply stuff! Scented or unscented?
January 28, 2016, 07:47:47 PM
well its obvious the tp is a critical part of the wiring harness so tell us already.... WHAT BRAND??
high end soft scott
I need to put this on hold and write some stuff on the group buy. for the avalon 6's
January 28, 2016, 07:31:20 PM
well its obvious the tp is a critical part of the wiring harness so tell us already.... WHAT BRAND??
January 28, 2016, 07:17:07 PM
LOL ok the wires seem to be pretty straight forward thanks for that, but I thought that they would get hard wired to the 90mm fans and not to a 3 pin terminal. I guess I'm going to have to get a pair of those as well or can I just hard wire the fans right to the PCIe?
There's only one thing I use toilet paper for and I certainly don't hope you plan on using that toilet paper for the same purpose I use toilet paper.
There's only one thing I use toilet paper for and I certainly don't hope you plan on using that toilet paper for the same purpose I use toilet paper.
January 28, 2016, 05:40:25 PM
here is the setting up of the fan power supply pcie cables from finksy with 1 end for the 2880/2980 breakout board.
I left out stripping the wires
yellow is pos goes to red on the fan jacks
black is neg goes to block on the fan jacks
one wire is 16 awg it can carry 80 watts so 1 wire for 2 fans is much more then needed as these 2 fans only pull 25 watts
vs 60 watts for the oem screamers
note I folded the extra wires back and taped them off
these twist nuts will do yellow or orange
the connected 3 pin fan jacks.
wtf is this for ?
black tape + short protection and strain relief
red tape more short protection and strain relief
assembled and would work at this point
so that does what?
and we tear some tp off the roll and stuff the tube? on both ends
I left you all hanging with this shot some one ask me what is next?
I left out stripping the wires
yellow is pos goes to red on the fan jacks
black is neg goes to block on the fan jacks
one wire is 16 awg it can carry 80 watts so 1 wire for 2 fans is much more then needed as these 2 fans only pull 25 watts
vs 60 watts for the oem screamers
note I folded the extra wires back and taped them off
these twist nuts will do yellow or orange
the connected 3 pin fan jacks.
wtf is this for ?
black tape + short protection and strain relief
red tape more short protection and strain relief
assembled and would work at this point
so that does what?
and we tear some tp off the roll and stuff the tube? on both ends
I left you all hanging with this shot some one ask me what is next?
January 27, 2016, 10:48:56 PM
they could use the plugs in the unit but you would need to cut an end off one of the fans .
I just used a pcie with bare wires it was plugged into the breakout board. two fans are under 25 watts the stock fans are 60 watts
Can you include that in your pics when you're ready to post them please. I'm not good when it comes to splicing wires and stuff. Thanks again for sharing your knowledge.
no worries will do.
January 27, 2016, 10:25:45 PM
they could use the plugs in the unit but you would need to cut an end off one of the fans .
I just used a pcie with bare wires it was plugged into the breakout board. two fans are under 25 watts the stock fans are 60 watts
Can you include that in your pics when you're ready to post them please. I'm not good when it comes to splicing wires and stuff. Thanks again for sharing your knowledge.
January 27, 2016, 10:22:53 PM
the 90mms are 22 with grills they burn 25 watts vs 60 watts and they are not anywhere as loud as the 3pack oem screaming deltas.
How do you power the 90mm fans? A separate PSU or do they attach directly to one of the plugs from the stock fans? I know kilo plugged the two wires from the 180mm fan to a PCIe.
they could use the plugs in the unit but you would need to cut an end off one of the fans .
I just used a pcie with bare wires it was plugged into the breakout board. two fans are under 25 watts the stock fans are 60 watts
January 27, 2016, 10:18:06 PM
the 90mms are 22 with grills they burn 25 watts vs 60 watts and they are not anywhere as loud as the 3pack oem screaming deltas.
How do you power the 90mm fans? A separate PSU or do they attach directly to one of the plugs from the stock fans? I know kilo plugged the two wires from the 180mm fan to a PCIe.
January 27, 2016, 07:58:57 PM
YES THEY Will shut down .
The large white 180mm quiet fan let my 2980s and my 2880s over heat. they cam right back with the stock fans. So I ordered 2x 90mm fans they work well but I crack a blade on one My fault. So I am waiting for a replacement before I post the setup.
The large white 180mm quiet fan let my 2980s and my 2880s over heat. they cam right back with the stock fans. So I ordered 2x 90mm fans they work well but I crack a blade on one My fault. So I am waiting for a replacement before I post the setup.
Perfect thanks! Well perfect that they shut down when it gets too hot. Not so perfect about your fan but at least those 90mm fans are relatively cheap. I'm assuming you have them set to push air into the psus.
the 90mms are 22 with grills they burn 25 watts vs 60 watts and they are not anywhere as loud as the 3pack oem screaming deltas.
January 27, 2016, 07:02:56 PM
YES THEY Will shut down .
The large white 180mm quiet fan let my 2980s and my 2880s over heat. they cam right back with the stock fans. So I ordered 2x 90mm fans they work well but I crack a blade on one My fault. So I am waiting for a replacement before I post the setup.
The large white 180mm quiet fan let my 2980s and my 2880s over heat. they cam right back with the stock fans. So I ordered 2x 90mm fans they work well but I crack a blade on one My fault. So I am waiting for a replacement before I post the setup.
Perfect thanks! Well perfect that they shut down when it gets too hot. Not so perfect about your fan but at least those 90mm fans are relatively cheap. I'm assuming you have them set to push air into the psus.
January 27, 2016, 06:44:06 PM
Yes, they have thermal protection along with all other possible protections. No need to worry.
Thanks Prelude that makes me feel a lot better.
missed that you have 2880's
I got a solid mod with these 2 fans.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835132021&cm_re=bgears-_-35-132-021-_-Product
and these grills
http://www.ebay.com/itm/New-Bgears-BG01381-90mm-Fan-Filter-2-Pack-/381409454959?hash=item58cdc66b6f:g:3igAAOSwiLdV~hr9
I will post the mod. really works well I am pulling 10 amps on my 2980 and noise is way down.
Nice Phil. I just ordered a pair of the DPS-2000BB PSU and a pair of the Scythe fans. I'm just waiting for everything to come in now.
I assume the 2880 has thermal shutdown safety as well before I try the 90mm fan mod.
YES THEY Will shut down .
The large white 180mm quiet fan let my 2980s and my 2880s over heat. they cam right back with the stock fans. So I ordered 2x 90mm fans they work well but I crack a blade on one My fault. So I am waiting for a replacement before I post the setup.
January 27, 2016, 05:35:15 PM
Yes, they have thermal protection along with all other possible protections. No need to worry.
Thanks Prelude that makes me feel a lot better.
missed that you have 2880's
I got a solid mod with these 2 fans.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835132021&cm_re=bgears-_-35-132-021-_-Product
and these grills
http://www.ebay.com/itm/New-Bgears-BG01381-90mm-Fan-Filter-2-Pack-/381409454959?hash=item58cdc66b6f:g:3igAAOSwiLdV~hr9
I will post the mod. really works well I am pulling 10 amps on my 2980 and noise is way down.
Nice Phil. I just ordered a pair of the DPS-2000BB PSU and a pair of the Scythe fans. I'm just waiting for everything to come in now.
I assume the 2880 has thermal shutdown safety as well before I try the 90mm fan mod.
January 27, 2016, 01:25:32 PM
@ generalalt the kilo17 big fan mod was not quite good enough for me. The 2880's would overheat running two avalon6s
I ordered some 90 mm fans from superbiiz bgears b-blaster going to demo it if it allow me to run the 2880 at 90% loads
Looking forward to that review as well. 2 90mm fans sound like a better fit for me as well since I only have 2 2880.
Wow sucks about burning out that board too. Sorry to hear that.
missed that you have 2880's
I got a solid mod with these 2 fans.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835132021&cm_re=bgears-_-35-132-021-_-Product
and these grills
http://www.ebay.com/itm/New-Bgears-BG01381-90mm-Fan-Filter-2-Pack-/381409454959?hash=item58cdc66b6f:g:3igAAOSwiLdV~hr9
I will post the mod. really works well I am pulling 10 amps on my 2980 and noise is way down.
January 27, 2016, 02:01:01 AM
My quite satisfy with my beast !
I will just need to set the voltage up a bit.
I will just need to set the voltage up a bit.
Jump to: