Pages:
Author

Topic: Vertcoin [VTC][ANN] Segwit Activated | ASIC Resistant Decentralized GPU Mining - page 25. (Read 201632 times)

newbie
Activity: 47
Merit: 0
Thanks, I knew about the site but never actually scrolled Smiley. It seems VTC is better than ETN, however it might be time to go back to ethereum.
full member
Activity: 224
Merit: 100
Sorry for being a total noob here, I'm currently mining Ethereum with Zotac 1060 and get a hashrate of around 22Mh/s. Can I expect the mining for VTC to result in a similar hashrate, or is it going to be lower? Thx.

https://tinyurl.com/ybg9gfu6 ( whatttomine with a single GTX-1060 (energy cost @ zero ))
newbie
Activity: 47
Merit: 0
Sorry for being a total noob here, I'm currently mining Ethereum with Zotac 1060 and get a hashrate of around 22Mh/s. Can I expect the mining for VTC to result in a similar hashrate, or is it going to be lower? Thx.
legendary
Activity: 1092
Merit: 1004
Look at this new miner:

mkxminer: optimized Lyra2rev2 miner for AMD GPUs (Vertcoin, Monacoin, XVG)

=== Speeds (no overclocking)
Radeon Pro Duo: 84.8MHs (42.4 + 42.4)
Fury X: 55MHs
Vega56: 47MHs (can be optimised further, just need some time and incentive)
RX 580: 39MHs
RX 480: 36MHs
R9 390: 32MHs
R9 380X: 26MHs
R9 280X: 26MHs
legendary
Activity: 1007
Merit: 1000
How do i sync with network my wallet?
0 acvities. Recommended nodes added.

  At least 1 of the block explores has nodes listed under network.  It's the 3rd one on the 1st page.  Didn't cut/paste it. 
sr. member
Activity: 1216
Merit: 333
How do i sync with network my wallet?
0 acvities. Recommended nodes added.

usually synchronizations may take a little time. But you do not have any nodes to add.
full member
Activity: 216
Merit: 100
How do i sync with network my wallet?
0 acvities. Recommended nodes added.
hero member
Activity: 752
Merit: 500
0 active connections in the QT wallet, how to fix it?
If possible please put a mini tutorial: how to add node

do not worry about it.
0 connections actually mean you are connected to the network.
it will be slow to update is all but once you are catched up it is really negligible difference
vtc transactions are really small only 20gb whole blockchain compared to btc's 150gb.

PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.

does PIVX have these ?  Cheesy

1clickminer
segwit
atomic swap
zero premine
asic resistance (proven n tested hardforked 2x)

Not exactly, it has other properties that separate it from the rest.  No premine.  Staking and MN only is better than mining and is naturally asic proof.  PIVX is immune to 51% attack.  Sure, growing pains with zPiv, but it will prevail.  Is better than DASH too.  I picked up some VTC, why not pick up some PIVX.  Just in case.  Atomic swap is interesting, I'll have to admit. 
legendary
Activity: 1007
Merit: 1000
PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.
Because this topic is vertcoin.
Sorry no I did not help I need to launch the QT wallet, so I have 2 mesacny file wallet.dat where I know what are my coins. But you can't start the QT wallet. After running the connection for 1 minute, and then no connections with the network and synchronization is not. After adding a node does not want coodinates I network and synced.Once again, please lay out here working file vertcon.conf
Now and again I need the text of the working file vertcoin.conf, not your comments.Thanks in advance!
[/quote]

addnode=50.174.94.249
addnode=98.29.116.16

.

   Those may or may not work.  They were added a long time ago.  I still use that conf file, but I also have a peers.dat that is probably used to connect.  Not sure but sometimes the block explores have nodes you can use. 
hero member
Activity: 583
Merit: 502
PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.

Because this topic is vertcoin.
Sorry no I did not help I need to launch the QT wallet, so I have 2 mesacny file wallet.dat where I know what are my coins. But you can't start the QT wallet. After running the connection for 1 minute, and then no connections with the network and synchronization is not. After adding a node does not want coodinates I network and synced.Once again, please lay out here working file vertcon.conf
Now and again I need the text of the working file vertcoin.conf, not your comments.Thanks in advance!

I'm using this wallet: Vertcoin Core version v0.11.1.0-9c5018b (64-bit), without any nodes added, and it connects fine. Maybe your problem is the wallet's version you're using.
member
Activity: 197
Merit: 10
argggghhhhh ...... fighting the urge to sell and take some profit now we are over $4.
member
Activity: 69
Merit: 10
Just bought 378 vtc excited to see what 2018 brings for vertcoin wish i knew about this coin sooner
full member
Activity: 400
Merit: 101
PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.
[/quote]
Because this topic is vertcoin.
Sorry no I did not help I need to launch the QT wallet, so I have 2 mesacny file wallet.dat where I know what are my coins. But you can't start the QT wallet. After running the connection for 1 minute, and then no connections with the network and synchronization is not. After adding a node does not want coodinates I network and synced.Once again, please lay out here working file vertcon.conf
Now and again I need the text of the working file vertcoin.conf, not your comments.Thanks in advance!
sr. member
Activity: 395
Merit: 250
0 active connections in the QT wallet, how to fix it?
If possible please put a mini tutorial: how to add node

do not worry about it.
0 connections actually mean you are connected to the network.
it will be slow to update is all but once you are catched up it is really negligible difference
vtc transactions are really small only 20gb whole blockchain compared to btc's 150gb.

PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.

does PIVX have these ?  Cheesy

1clickminer
segwit
atomic swap
zero premine
asic resistance (proven n tested hardforked 2x)

sr. member
Activity: 395
Merit: 250
Not what I asked. 0-1 active connections and the wallet stops sync after 1 minute. After adding the node, I have no connections with the network. Please lay out here working file vertcoin.conf

0 connection means you are in the network, if you are not then it will say no block source.
it's going to be painfully slow to sync up but you will sync fully one step at a time.
if you scroll a few pages back there will be list of nodes you could try to add them it's a generic process same with every qt.
the only real way for your nodes to grow is to conduct transactions often.
otherwise there's no point in running a full node just get an online wallet with private key.

hero member
Activity: 752
Merit: 500
0 active connections in the QT wallet, how to fix it?
If possible please put a mini tutorial: how to add node

do not worry about it.
0 connections actually mean you are connected to the network.
it will be slow to update is all but once you are catched up it is really negligible difference
vtc transactions are really small only 20gb whole blockchain compared to btc's 150gb.

PIVX Blockchain is <1 Gb.  PIVX can’t have a 51% attack.  Just saying.   I’m just really trying to understand why people like VTC over PIVX.
full member
Activity: 400
Merit: 101
Not what I asked. 0-1 active connections and the wallet stops sync after 1 minute. After adding the node, I have no connections with the network. Please lay out here working file vertcoin.conf
sr. member
Activity: 395
Merit: 250
0 active connections in the QT wallet, how to fix it?
If possible please put a mini tutorial: how to add node

do not worry about it.
0 connections actually mean you are connected to the network.
it will be slow to update is all but once you are catched up it is really negligible difference
vtc transactions are really small only 20gb whole blockchain compared to btc's 150gb.
full member
Activity: 400
Merit: 101
0 active connections in the QT wallet, how to fix it?
If possible please put a mini tutorial: how to add node
sr. member
Activity: 490
Merit: 251
Revolutionizing Brokerage of Personal Data
Easy Mine Vertcoin Pool
No Fees, No Registration, Automatic Payouts. Nothing But Mining.

Sick of mining p2pool and never seeing your predicted payout go above 0?


not sure why your are spreading your ignorance here but p2pool is the only intelligent way to mine this coin, wake up kiddo



Hey Guys - Adding to my VTC position and after this last weekend mess with BCH, i'm even more in favor of anything truly decentralized
* The Roger & Jihan's antics this weekend just showed us BTC & BCH are not truly decentrailzed. 
At one point exodus tried to charge me $39 to send $460 in BTC - i'm going almost entirely into LTC & VTC  a couple questions -
1) Any chance someone is working on the One Click Miner For Mac's ?
2) anything in the future to get VTC on Binance or Cryptopia ?

* Thanks in advance for your input / comments !




And why do you like cryptopia so much? The addition to this exchange will not change anything in the coin. Markets are not the main thing. The main work on the coin.
Pages:
Jump to: