Explanation
Topic: Wall Observer BTC/USD - Bitcoin price movement tracking & discussion - page 5392. (Read 26623524 times)
May 26, 2021, 03:01:25 AM
May 26, 2021, 02:52:36 AM
...
january 2021 - check✔
february 2021 - check✔
march 2021 - check✔
april 2021 - check✔
may 2021 - ¿
(go on we are waiting, you got 144 hours baby)
prediction for the year 2021 - at least one new ath every month 
january 2021 - check✔
may 2021 - ¿
(go on we are waiting, you got 144 hours baby)
40K Resistance crossed but 42 is a bit tougher. Let's see
...
honestly, i don't see us seeing another BTC-ath this month...
but hopefully i am wrong there
go BTC go
May 26, 2021, 02:20:56 AM
Prediction:
New ATH by mid June.
Quote it for posterity gentlemen.
New ATH by mid June.
Quote it for posterity gentlemen.
Oh?
So we are skipping an ATH for May?
I was told a new ATH for every month in 2021.
So bitcoin changed its mind about May?
That sucks.
Exactly.... keep your promise bitcoin don't be a bitch...!!!
prediction for the year 2021 - at least one new ath every month
january 2021 - check✔
may 2021 - ¿
(go on we are waiting, you got 144 hours baby)
40K Resistance crossed but 42 is a bit tougher. Let's see
https://t.me/OfficiaLCryptoindia/8363
May 26, 2021, 02:01:25 AM
May 26, 2021, 01:55:57 AM
I'll delay my own humble price action analysis a bit because I'm convinced the big money also is parsing this thread too.
I hope the Newbies have learned something from the past days.
I hope the Newbies have learned something from the past days.
May 26, 2021, 01:46:35 AM
Morning pump gogogo
May 26, 2021, 01:31:41 AM
after shower I got aware that one of my testicle hangs lower than the other one. ~
any help from you genius folks?
My 9gag knowledge: that's so they don't hit each other. It's a feature, not a bug!any help from you genius folks?
source
it looks more like this.
EDIT: with this low BTC prices I really thinking about to sell both.
Could you scan them with your phone and send me the stl files? I could try and make a print.
Nah, there comes pictures in my mind of you raping my 3D printed balls (either in plastic or steel). go away!
But you are gonna need some kind of memento.
I was thinking you could gild them and take them out once a year on the day you lost them and tell your grandchildren the story of how your house came to generational wealth, it could become a tradition in the house of Gyrsur.
my trust is very limited especially in you but that sounds like a really nice idea.
congrats to you for the Binance card. I hope the SWAT team in Sweden is not so trained well like the ones from Eastern Europe. 3 am to 5 am is the time.
May 26, 2021, 01:28:30 AM
Meanwhile, crossing $40k and breaking with the downward slope of the last few days. A glimmer of hope 
May 26, 2021, 01:22:23 AM
Haven't you got some swimming in the cold sea or Kayaking to do.
I don't know where you get the time for your hobbies you spend so much time trolling here and elsewhere.
Let me guess, after all that successful trading, you got the one that wiped you out, joining the 99% who eventually fail.
Now you are so bitter a no-coiner you can't stand that some of the MF's posting here a multi millionaires.
Now down to serious business, beer and dinner.
My point exactly 99% of people will fail and panic dump at the first correction but bitcoin will save the poors from starvation
how many liquidations at each dump huh ?
they shoulda better stick with inflation than lose all their savings
And no i still make half your monthly mcdonald salary each day, sorry, spltting facts is not automatically trolling or bitterness, except here where antagonism or should i say realism is not accepted.
Now go back nurturing your beer dad bob
I'm still loving you
May 26, 2021, 01:20:57 AM
after shower I got aware that one of my testicle hangs lower than the other one. ~
any help from you genius folks?
My 9gag knowledge: that's so they don't hit each other. It's a feature, not a bug!any help from you genius folks?
source
it looks more like this.
EDIT: with this low BTC prices I really thinking about to sell both.
Could you scan them with your phone and send me the stl files? I could try and make a print.
Nah, there comes pictures in my mind of you raping my 3D printed balls (either in plastic or steel). go away!
But you are gonna need some kind of memento.
I was thinking you could gild them and take them out once a year on the day you lost them and tell your grandchildren the story of how your house came to generational wealth, it could become a tradition in the house of Gyrsur.
May 26, 2021, 01:16:41 AM
Binance card update. Drove down to the local, unmanned, gas station, the card didn't work in their machine, "technical error", tried another card and it worked.
Drove on down to Mcd and had breakfast, the card worked, but I couldn't blipp it, I had to insert it and use my pin. The text on the machine was in English instead of the usual Swedish, so it identifies it as a foreign card, but other then that it worked fine.
This could just be initial bumps in the road because the card is so recently activated.
ATM and grocery shopping remains.
Drove on down to Mcd and had breakfast, the card worked, but I couldn't blipp it, I had to insert it and use my pin. The text on the machine was in English instead of the usual Swedish, so it identifies it as a foreign card, but other then that it worked fine.
This could just be initial bumps in the road because the card is so recently activated.
ATM and grocery shopping remains.
May 26, 2021, 01:06:32 AM
Prediction:
New ATH by mid June.
Quote it for posterity gentlemen.
New ATH by mid June.
Quote it for posterity gentlemen.
Good to hear so, liking this Elwar more as the one saying ATH already reached for 2 times
May 26, 2021, 01:01:33 AM
May 26, 2021, 12:53:20 AM
after shower I got aware that one of my testicle hangs lower than the other one. ~
any help from you genius folks?
My 9gag knowledge: that's so they don't hit each other. It's a feature, not a bug!any help from you genius folks?
source
it looks more like this.
EDIT: with this low BTC prices I really thinking about to sell both.
Could you scan them with your phone and send me the stl files? I could try and make a print.
Nah, there comes pictures in my mind of you raping my 3D printed balls (either in plastic or steel). go away!
May 26, 2021, 12:49:00 AM
Prediction:
New ATH by mid June.
Quote it for posterity gentlemen.
New ATH by mid June.
Quote it for posterity gentlemen.
Oh?
So we are skipping an ATH for May?
I was told a new ATH for every month in 2021.
So bitcoin changed its mind about May?
That sucks.
Exactly.... keep your promise bitcoin don't be a bitch...!!!
prediction for the year 2021 - at least one new ath every month
january 2021 - check✔
may 2021 - ¿
(go on we are waiting, you got 144 hours baby)
May 26, 2021, 12:46:42 AM
Seems to me that you are complaining [...]
Motherf^cker... it seems you want to be the president of the WO !!! 
We got our next poll idea for the legends of the WOs!!!
I'll vote for Bob because el Duderino is not so much into that gay thing.
May 26, 2021, 12:20:22 AM
[edited out]
Turing Test: JJG is a bot. No detection of interpretation of human beings.
Tell me something that I don't already know.
You must be a bot ur lil selfie to believe that a bot does not know to be a bot.
dont you bots have a secret handshake or something to identify yourselves? id think there would be standards in place by now.
Can bots keep a secret?
Of course they do....
Seems to me that you are complaining [...]
Motherf^cker... it seems you want to be the president of the WO !!! We got our next poll idea for the legends of the WOs!!!
May 26, 2021, 12:04:01 AM
I need to learn some terminology, what's slicing?
Holy moly 2900 bucks A YEAR for autodesk.
Holy moly 2900 bucks A YEAR for autodesk.
I have recently just got into 3D printing myself (funny how that happens hey)
Picked up an ender 3 V2 and really enjoying the experience.
I am now about to embark on building my own from scratch based on the Hypercube Evolution.
BTW I use CURA for slicing.
Seems to do a very reasonable job and I also play around with tinkercad and have had pretty good results so far.
Struggling a little with PETG printing though but PLA is is a breeze.
You always tend to get stringy results with PETG/CEP when you don't have a cabin. Built my own, now it's working much better.
EDIT: And reduce cooling fans to 10% or even "off" when printing PETG, while the travel speed (moving between printing paths) should be as fast as possible, which keeps down the stringing. Print at low speed, about half of PLA.
@Arrie: I'm using "3D Builder" (Yeah, it's Micro$oft, but free) for easy modeling. It's half intuitive. Just define, place and combine (or exclude) simple 3d objects to make more or less complex structures.
Didn't master the learning curve with the free CAD proggies.
I'm using Cura as slicer. Good enough.
Thanks, I'll take a look at that.
However, worth to add is that i found out if you want to model threads, 3D Builder is unusable. You'd need Fusion360 or one of the free 3D CAD programs.
No easy way to get threads, that's why i still cut them in metal and press/glue them into the 3D prints.
May 26, 2021, 12:01:26 AM
May 25, 2021, 11:51:18 PM
Hey, that reminds me.. where is my laser eye hat, @homer bomer? U been discriminating against dees here kinds of peeps (I mean not peeps, whoops)?
Sorry Mr. JJG! I guess I have been slacking lately. Promise I'll fix you up after my night shifts.
Hahahaha
No big deal.. I was just in the midst of a temperature tantrum and trying to find excuses to assert whoa is me.
Jump to: