Wallet troubleshooting help | Bitcointalksearch.org

clover12

jr. member

Activity: 168

Merit: 2

Now I am trying to decide if my bitcoin is stuck in Electrum and it is not retrievable?

When I made the watch-only wallet, it never gave me an option to create seeds, because I would have written those down and photographed the screen too.

So my bitcoin is sitting in this watch-only wallet at Electrum.

This is horrible. Sad

Is it lost coin? Why would would anybody want a watch-only wallet?

This watch-only wallet traps your coin in there so it is inaccessible? Huh

clover12

jr. member

Activity: 168

Merit: 2

I'm now accepting any new replies to this topic for how to get my bitcoin off blockchain and into my ledger wallet. For I am totally lost now.

I figured it would be easy to just send to my ledger but then I had to open this Electrum wallet and things got a little confusing, didn't they...

Sad

clover12

jr. member

Activity: 168

Merit: 2

Quote

why not just use blockchain.info to send your bitcoin to your ledger address?

Can I do that? I figured the reason I am using this Electrum thing is because my bitcoin is basically stuck at blockchain.info.

Something is not adding up here. Why is this so complicated?

Thirdspace

hero member

Activity: 1232

Merit: 738

Mixing reinvented for your privacy | chipmixer.com

Quote from: clover12 on July 03, 2018, 07:40:29 PM

My balance was also found at blockchain.info by plugging in my private key. So it's there, somewhere.

why not just use blockchain.info to send your bitcoin to your ledger address?

Quote from: clover12 on July 03, 2018, 07:40:29 PM

Hi Adolfin, yes my bitcoin balance is visible while logged-in with Electrum, and at the top of the Electrum screen it says "imported, watching-only". Does that mean my coin is now at Electrum, but it's stuck in a wallet that is watching-only?

that means you've imported by public address as watch-only address
you need to import by private key to be able to spend amount from that address

Quote from: clover12 on July 03, 2018, 07:40:29 PM

I have only tried one of the private keys at Electrum and it simply does not work. I am wondering what to do now, since my Electrum wallet is watching-only.. Angry

try re-import again by providing private keys to Electrum

clover12

jr. member

Activity: 168

Merit: 2

Maybe my error is at Electrum's Install Wizard, it asks this:

Quote

What kind of wallet do you want to create?

Standard wallet
Wallet with two factor authentification
Multi-signature wallet
Import Bitcoin addresses or private keys

So far I have only tried that fourth option.. (and the fourth option creates a watching-only wallet)

I browsed through the Standard wallet option and it gives an option to use a hardware wallet..
Is that Standard wallet the one I need to use for putting my coin into my Ledger?

clover12

jr. member

Activity: 168

Merit: 2

Quote

So you already "loaded" the wallet with the correct balance? -- Is your balance visible in your wallet itself yet? This to me sounds like you made a watch-only wallet, correct?

Can't you try importing all 4 of the keys in Electrum? One of them is bound to have some balance that way, depending from which script the adress is derived, right?

Hi Adolfin, yes my bitcoin balance is visible while logged-in with Electrum, and at the top of the Electrum screen it says "imported, watching-only". Does that mean my coin is now at Electrum, but it's stuck in a wallet that is watching-only?

My balance was also found at blockchain.info by plugging in my private key. So it's there, somewhere.

I have only tried one of the private keys at Electrum and it simply does not work. I am wondering what to do now, since my Electrum wallet is watching-only.. Angry

clover12

jr. member

Activity: 168

Merit: 2

Quote

So you already "loaded" the wallet with the correct balance? -- Is your balance visible in your wallet itself yet? This to me sounds like you made a watch-only wallet, correct?

Can't you try importing all 4 of the keys in Electrum? One of them is bound to have some balance that way, depending from which script the adress is derived, right?

Correct: when I log-in to Electrum it shows my bitcoin, the original date of sending it to the blockchain, and the balance.

Also when I log in, an Information box pops up and says this:

Quote

"This wallet is watching-only. This means you will not be able to spend Bitcoins with it. Make sure you own the seed phrase or the private keys, before you request Bitcoins to be sent to this wallet."

What exactly does that mean? laughing out loud. This is insane.. Undecided

AdolfinWolf

legendary

Activity: 1946

Merit: 1427

Quote from: clover12 on July 03, 2018, 06:13:01 AM

Hi 3rd Space, nope, my private key begins with 5. After entering my private key into bitaddress.org, it gave me 4 different private keys (all of which I photographed for my record).

So I am making progress with this but now at Electrum, it will not accept my private key. At Electrum, I have it set-up to Send my coin into my Ledger, but now the issue is Electrum does not give me the button to send anything.

Talk about confusing. Huh

It must be something to do with using the incorrect private key (since I have 4 private keys, which one do I use?). Also I need instructions for entering my private key into Electrum.. Do I use the "sweep" function?

So you already "loaded" the wallet with the correct balance? -- Is your balance visible in your wallet itself yet? This to me sounds like you made a watch-only wallet, correct?

Can't you try importing all 4 of the keys in Electrum? One of them is bound to have some balance that way, depending from which script the adress is derived, right?

Thirdspace

hero member

Activity: 1232

Merit: 738

Mixing reinvented for your privacy | chipmixer.com

Quote from: clover12 on July 02, 2018, 05:50:29 PM

So the website for bitaddress.org is back online today, so I did as suggested, and I went to their site, unplugged my internet, and then checked my private key.. Success!!

Yay. So I have now confirmed it is a valid private key, with some BTC sitting there

when you do that, does the same public address shown on that bitaddress page?
since you said your private key is 51 chars starts with 5,
then your address should be the one below Bitcoin Address QR (on the left side)
does it match your public address from warp wallet?

clover12

jr. member

Activity: 168

Merit: 2

Hi 3rd Space, nope, my private key begins with 5. After entering my private key into bitaddress.org, it gave me 4 different private keys (all of which I photographed for my record).

So I am making progress with this but now at Electrum, it will not accept my private key. At Electrum, I have it set-up to Send my coin into my Ledger, but now the issue is Electrum does not give me the button to send anything.

Talk about confusing. Huh

It must be something to do with using the incorrect private key (since I have 4 private keys, which one do I use?). Also I need instructions for entering my private key into Electrum.. Do I use the "sweep" function?

Thirdspace

hero member

Activity: 1232

Merit: 738

Mixing reinvented for your privacy | chipmixer.com

Quote from: clover12 on June 27, 2018, 07:45:27 AM

From Warp Wallet I have a public key, a passcode, and a private key

just a simple question to confirm something, is your private key start with '6...'?
if it does then it's BIP38 encrypted, you need to decrypt it first to get the original privkey

Quote from: clover12 on July 02, 2018, 05:50:29 PM

Yay. So I have now confirmed it is a valid private key, with some BTC sitting there

But.. the exact-same private key still does not work when I input it at Electrum..

did you use the passcode to decrpyt it? then you should get an unencrypted private key(s)
I think there is a way to import it with electrum android wallet using the QR and passcode
otherwise you should just use the regular unencrypted private key shown by bitaddress

clover12

jr. member

Activity: 168

Merit: 2

Alright alright alright, look, I made it into my Electrum..

Now how do I use Electrum? Huh

clover12

jr. member

Activity: 168

Merit: 2

Alright I have another update in this saga..

So the website for bitaddress.org is back online today, so I did as suggested, and I went to their site, unplugged my internet, and then checked my private key.. Success!!

Yay. So I have now confirmed it is a valid private key, with some BTC sitting there

But.. the exact-same private key still does not work when I input it at Electrum..

What gives?? To me it seems like the issue is not my wallet but it is something about Electrum..?

Huh

clover12

jr. member

Activity: 168

Merit: 2

Okay I'm at it again

I did as others suggested here at this topic and I went back to warp wallet and generated a temporary wallet, and Yes the temporary private key worked for accessing Electrum.

However, the thing about the actual private key in question (the one where I sent bitcoin too) is that I did not enter my private key incorrectly - because I have a clear photograph of the computer screen once I created: the public key, the (51 character) private key, and the bar code things.

So I wonder, can Warp Wallet generate bad keys?

Everyone is recommending to go to bitaddress.org to use that for verifying if the private key is valid. I keep trying to access their site in multiple ways and it says the site cant be reached.

Upon more research, I found this at a bitcointalk topic from somebody else with wallet issues:
"Ok...I tried Electrum...it works fine if you use the 51 character base58 private key....but it does not recognize the PRIVATE KEY BIP38 FORMAT...i need to try that to see if password decrypts it and then show private and public key correctly"

Folks... this is way over my head with "base58" and "bip38", but I have a feeling this is what has happened.

Can anyone help with instructions for unlocking this private key of mine and getting my bitcoin onto my Ledger?

clover12

jr. member

Activity: 168

Merit: 2

When I created it with Warp Wallet, I took a photograph of the computer screen and it shows the public key, the private key, passphrase, and 2 QR Codes.

I don't get it. I am typing my exact private key into Electrum and I've tried dozens of times.

Is there any other way to do this besides using Electrum?

NeuroticFish

legendary

Activity: 3668

Merit: 6382

Looking for campaign manager? Contact icopress!

Quote from: clover12 on June 27, 2018, 09:18:49 AM

So in the input window I used your "example" public address, and private address, and Electrum gave me the "Next" button.

But when I input my own private key, or my own public key, it does not give the "Next" button.

Then I typed my private key using WordPad, then copy/pasted it into the Electrum box, and still, no "Next" button..

Huh

If next is not enabled it's usually a sign that the thing written down is not a correct private key.
Maybe a good start would be to check if the private key you've written down is a correct private key. I've found a thread about this here: https://bitcointalksearch.org/topic/how-to-check-is-private-key-valid-1975790

Since even your address is visible only in circumstances I don't understand, maybe you get somebody else help you. Sorry.

OpiNiOnZ

newbie

Activity: 6

Merit: 0

Action speaks louder than words. What i mean is watching live demonstration is more helpful than reading. Try to check youtube then ask here again for further assistance. I always consult youtube first before asking any questions to others and it is effective to learn something new.

clover12

jr. member

Activity: 168

Merit: 2

So in the input window I used your "example" public address, and private address, and Electrum gave me the "Next" button.

But when I input my own private key, or my own public key, it does not give the "Next" button.

Then I typed my private key using WordPad, then copy/pasted it into the Electrum box, and still, no "Next" button..

Huh

NeuroticFish

legendary

Activity: 3668

Merit: 6382

Looking for campaign manager? Contact icopress!

Quote from: clover12 on June 27, 2018, 09:13:49 AM

What's this all about?

My guess is that you've written it incorrect.
Again, I advise you to check the steps with a temporary wallet you make so you understand first what you are doing.

clover12

jr. member

Activity: 168

Merit: 2

Okay I am stuck at Electrum

I installed Electrum and checked "Import bitcoin address or private keys" and in the next window typed in my private key.
I did not copy/paste my private key because all I did was had it written on a piece of paper.

Now with my private key typed in, Electrum does not let me click "Next"

What's this all about?

Topic: Wallet troubleshooting help (Read 286 times)