Topic: [WDC] Worldcoin | 3.0 Flirtatious Ant Released! | Multicoin architecture - page 123. (Read 442449 times)
May 19, 2013, 04:53:09 PM
GoogleDocs WDC/LTC Nice Exchange: https://bitcointalksearch.org/topic/ann-wdcltc-google-docs-exchange-closed-210274
May 19, 2013, 04:50:44 PM
3 connections using above instructions which goes to 0 within one minute...
May 19, 2013, 04:22:42 PM
I have 20 connections.
May 19, 2013, 03:41:21 PM
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
i like it but add this node to... 5.135.115.138 its my server so i know its not going to go down XD
Added.
I think the problem is these nodes are hitting max connections and cant take on anymore. The popularity causes the nodes to be overloaded. lol
May 19, 2013, 03:37:31 PM
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
i like it but add this node to... 5.135.115.138 its my server so i know its not going to go down XD
Added.
May 19, 2013, 03:34:30 PM
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
i like it but add this node to... 5.135.115.138 its my server so i know its not going to go down XD
May 19, 2013, 03:31:22 PM
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
Nice guide!
May 19, 2013, 03:26:03 PM
Here is the definitive guide to getting WorldCoin connection for the first time:
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66 -addnode=5.135.115.138 -addnode=209.141.39.95 -addnode=75.72.84.89 -addnode=86.129.225.244 -addnode=72.8.182.2 -addnode=98.193.75.196
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
1. Why this problem happening? because the windows client only had a couple of IP addresses hardcoded into it and they keep timing out due to demand. Once you get a connection for the first time after following this guide this problem will never happen again
2. Close worldcoinqt
3. Delete the .conf file if it's there and peers.dat in the 'roaming' folder of 'appdata' for worldcoin
4. navigate to where worldcoinqt.exe is, (hold ctrl-shift-rightclick) and select open command window there. Paste into the command line:
worldcoin-qt -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=173.16.119.230 -addnode=173.16.94.167 -addnode=66.232.186.235 -addnode=71.201.163.216 -addnode=98.193.75.196 -addnode=71.86.91.187 -addnode=63.175.158.121 -addnode=82.8.158.89 -addnode=188.194.8.221 -addnode=183.62.232.93 -addnode=124.188.83.171 -addnode=72.222.208.81 -addnode=89.10.226.206 -addnode=178.148.10.66 -addnode=178.148.10.66 -addnode=5.135.115.138 -addnode=209.141.39.95 -addnode=75.72.84.89 -addnode=86.129.225.244 -addnode=72.8.182.2 -addnode=98.193.75.196
You have to right click to paste. This will add a bunch of healthy nodes and get you started.
May 19, 2013, 03:20:31 PM
Any way to increase block time from 15 sec to 20 sec to try and insulate against that "root" that was pre-announced? It touts that the 20 second block would still provide near instant transactions with less orphans. I notice there are still quite a few orphans. Is this possible?
once the difficulty is high enough, orphans shouldn't be a problem at all.
May 19, 2013, 02:27:19 PM
Not sure you can change this in the middle of the blockchain, it's risky tho.
May 19, 2013, 02:08:56 PM
Any way to increase block time from 15 sec to 20 sec to try and insulate against that "root" that was pre-announced? It touts that the 20 second block would still provide near instant transactions with less orphans. I notice there are still quite a few orphans. Is this possible?
i believe it would be possible but it would be a fairly big task as all clients and mining pools would have to upgrade which would essentially be creating worldcoin2
May 19, 2013, 02:03:29 PM
Any way to increase block time from 15 sec to 20 sec to try and insulate against that "root" that was pre-announced? It touts that the 20 second block would still provide near instant transactions with less orphans. I notice there are still quite a few orphans. Is this possible?
May 19, 2013, 01:48:56 PM
@vm1990: But only 1 connection 
wait a little longer you'll get more connections May 19, 2013, 01:42:31 PM
@vm1990: But only 1 connection
give it a few mins if its still like that ill upload a new file
May 19, 2013, 01:41:37 PM
I downloaded the client again from the official website and installed it on a second computer and it syncs without any problem.
Maybe some country is blocking IP's and that is why some people can't connect.
Maybe some country is blocking IP's and that is why some people can't connect.
hmmm could be a good point but if they are its the first ever connection to be blocked on my home connection and a server in a data center... i think im going to stick with the connections getting overloaded when we where trying to connect XD (also servers in a different country)
May 19, 2013, 01:40:30 PM
@vm1990: But only 1 connection
May 19, 2013, 01:38:51 PM
Guys,
I am getting a lot of rejects. What settings do you have in cgminer? Currently i have Queue: 0, Expiry:9 and scantime:10.
I am getting a lot of rejects. What settings do you have in cgminer? Currently i have Queue: 0, Expiry:9 and scantime:10.
May 19, 2013, 01:31:54 PM
Who can send to me peer.dat file? I cannot sync my wallet!!!
read the post in my sig bar plenty of download options and guide
Thank you so much
May 19, 2013, 01:31:07 PM
Is there a dice game or other sort of instant gambling for WDC yet? I want to gamble damnit lol. (not lottery)
I might have DICE ready in 3-4 weeks. Programmers suddenly stopped working weekends.. Wife, life etc..
May 19, 2013, 01:29:43 PM
Is there a dice game or other sort of instant gambling for WDC yet? I want to gamble damnit lol. (not lottery)
Jump to: