Topic: [WDC] Worldcoin | 3.0 Flirtatious Ant Released! | Multicoin architecture - page 125. (Read 442449 times)
May 19, 2013, 10:27:49 AM
I have yet to have a single issue with the wallet. I've tried multiple time to duplicate the problems you are having and I can't. Forward the port I guess and see if it resolves the issue. Also if you were solo mining, you can delete your .conf file and try that as well.
May 19, 2013, 10:22:03 AM
I have a wallet running on one miner and another instance in VM (Win7-64). The one on miner which has run since WDC release connects and works fine. The wallet on VM, dl'd yesterday, works off and on. I've tried adding nodes, there is a thread somewhere in the alt crypto with a long list of them, can't find it atm.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
when you do a fresh install of the wallet it trys to get a list of peers from 2 ip addresses that are preprogramed into the wallet. at the moment those addresses are under a heavy load which makes it hit am miss if you get a connection or not. i couldnt get a connection to the preprogrammed ips so that why i did the fix post
Yep, kept noticing 2 connections, then 1, then none. Thank you for updating the peers list but all I get from that site are a ton of redirects to dl a video viewer and other stuff. Possible to upload it to a different host?
Also just wanted to say, this coin is great! Transactions are wicked fast.
May 19, 2013, 09:27:58 AM
I have a wallet running on one miner and another instance in VM (Win7-64). The one on miner which has run since WDC release connects and works fine. The wallet on VM, dl'd yesterday, works off and on. I've tried adding nodes, there is a thread somewhere in the alt crypto with a long list of them, can't find it atm.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
when you do a fresh install of the wallet it trys to get a list of peers from 2 ip addresses that are preprogramed into the wallet. at the moment those addresses are under a heavy load which makes it hit am miss if you get a connection or not. i couldnt get a connection to the preprogrammed ips so that why i did the fix post
May 19, 2013, 09:23:34 AM
I just tried this and restarted and we are at about 120 seconds and it is just as dead as before.
Do the devs realize it cannot go live on an exchange in this state?
The devs probably think you are a twit suggesting that, I certainly do.
No it is acually quite a large issue that could come back:
Someone buys some on an exchange and goes to the fancy website to download a client that cannot connect to any peers.
Their coins are stuck on the exchange and they are stuck outside the network.
The process of manually downloading a fresh peers list is less than professional. CHNCoin was better thought out.
As far as calling me a "twit" - thank you for letting us all know you are mentally still a five year old (maybe ten? or is that too generous?). I refuse to engage in fruitless insult wars on the Internet with you. You will find you tend to get a rep in this community when you start randomly name calling other members over a verified technical problem with some client software.
I appreciate the people who actually addressed a major issue and uploaded a WORKING peers.dat file so the wallet can function.
May 19, 2013, 09:22:50 AM
I have a wallet running on one miner and another instance in VM (Win7-64). The one on miner which has run since WDC release connects and works fine. The wallet on VM, dl'd yesterday, works off and on. I've tried adding nodes, there is a thread somewhere in the alt crypto with a long list of them, can't find it atm.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
Just closed wallet in VM, deleted all nodes in .conf, restarted, now has 8 connections and synced up.
Goblins.
May 19, 2013, 09:11:12 AM
right anyone having connection problems simply follow this guide
1. download this file (multiple hosts pick which ever) (due to problems with ads and stuff id recommend the google drive option 1st link)
www.docs.google.com/file/d/0B8mFOtw_u1xQbXNvUlI2NVd2YkU/edit?usp=sharing
www.multiupload.nl/CPTEDUDKF0
or
Provided by Moray
https://mega.co.nz/#!AF9CmTJA!dEPkM0FiFU6Gw6XgXnxjPXJahO0KfTJn4vkQhUqD39s
2. go to here C:\Users\"your user name"\AppData\Roaming\Worldcoin
3. move downloaded file replacing current peers.dat file
4. start worldcoin and watch it sync
A Thanks goes to yager for helping me
1. download this file (multiple hosts pick which ever) (due to problems with ads and stuff id recommend the google drive option 1st link)
www.docs.google.com/file/d/0B8mFOtw_u1xQbXNvUlI2NVd2YkU/edit?usp=sharing
www.multiupload.nl/CPTEDUDKF0
or
Provided by Moray
https://mega.co.nz/#!AF9CmTJA!dEPkM0FiFU6Gw6XgXnxjPXJahO0KfTJn4vkQhUqD39s
2. go to here C:\Users\"your user name"\AppData\Roaming\Worldcoin
3. move downloaded file replacing current peers.dat file
4. start worldcoin and watch it sync
A Thanks goes to yager for helping me
May 19, 2013, 09:06:16 AM
Good glad to here it helped
its atually a very simple fix and a very bad problem for p2p things its like downloading a torrent the torrent connects to 1 ip to get a list of more ips to dowload from. but in this case the 1 ip is either maxed out or offline so anyone trying to get the list of other ips is stuck. but youve already had the list of ips so by you sending that list to me i dont need to connect to the inbuilt ip and bypass the time outs and waiting 
May 19, 2013, 09:01:44 AM
Good glad to here it helped
May 19, 2013, 08:58:15 AM
i uploaded one for him. hopefully it helps.
see and now we have it downloading the block chain, all so very simple. thank you so much, see it is just that simple ill also upload a fresh peer.dat for anyone in a short while
May 19, 2013, 08:55:33 AM
i uploaded one for him. hopefully it helps.
May 19, 2013, 08:55:01 AM
I installed mine yesterday and it idled for awhile, just let it sit came back a few hours later to it fully connected.
been waiting for nearly 3 hours now..... why not give me your ip??? or even just upload the peers.dat list somewhere
anyone would think im asking for passwords and important info all im after is a list nothing more nothing less
C:\Users\Windows 7\AppData\Roaming\Worldcoin
then itss peers.dat upload it to somewhere like sendspace and i can get an "ACTIVE" list of peers
Will upload later when i get home if no one has.
May 19, 2013, 08:54:51 AM
BEHOLD...
Peers.dat list here:
https://mega.co.nz/#!AF9CmTJA!dEPkM0FiFU6Gw6XgXnxjPXJahO0KfTJn4vkQhUqD39s
Enjoy.
Peers.dat list here:
https://mega.co.nz/#!AF9CmTJA!dEPkM0FiFU6Gw6XgXnxjPXJahO0KfTJn4vkQhUqD39s
Enjoy.
May 19, 2013, 08:54:03 AM
After 8 hours it's finally picked up a connection. Blockchain being downloaded
May 19, 2013, 08:52:59 AM
I had some problems syncing too. I deleted peers.dat, worldcoin.conf and in settings->options->network checked "Map port using UPnP". I restarted the wallet and have now got 8 connections in the last minute. Not sure if this was just random luck or if any of what i did helped.
There are thousands of people connected, ive installed the new wallet and always comnected with 8 peers. Enabke upnp on your routers and check it off in your wallets.
May 19, 2013, 08:48:20 AM
see the post above would be awesome if someone sent me the peers.dat list
would be awesome if someone sent me the peers.dat list May 19, 2013, 08:41:50 AM
I just fired up my WDC wallet and instantly got 5 active connections and it synced (1000 blocks) with no issues. How can I help?
May 19, 2013, 08:28:49 AM
I installed mine yesterday and it idled for awhile, just let it sit came back a few hours later to it fully connected.
been waiting for nearly 3 hours now..... why not give me your ip??? or even just upload the peers.dat list somewhere
anyone would think im asking for passwords and important info all im after is a list nothing more nothing less
C:\Users\Windows 7\AppData\Roaming\Worldcoin
then itss peers.dat upload it to somewhere like sendspace and i can get an "ACTIVE" list of peers
May 19, 2013, 08:25:48 AM
I installed mine yesterday and it idled for awhile, just let it sit came back a few hours later to it fully connected.
May 19, 2013, 08:18:58 AM
I just tried this and restarted and we are at about 120 seconds and it is just as dead as before.
Do the devs realize it cannot go live on an exchange in this state?
The devs probably think you are a twit suggesting that, I certainly do. The client works fine, there are over 700 miners atm, and I bet all have wallets as there are no exchanges to keep your coins on.
you prove to be less than useful.... the reason it works for everyone is because they have the peer list which grows and grows but if youve done a fresh install then you need to connect to one of the inbuilt ip addresses which are either dead or maxed out
May 19, 2013, 08:16:59 AM
I just tried this and restarted and we are at about 120 seconds and it is just as dead as before.
Do the devs realize it cannot go live on an exchange in this state?
The devs probably think you are a twit suggesting that, I certainly do. The client works fine, there are over 700 people mining atm, and I bet most have wallets as there are no exchanges to keep your coins on.
If there was a problem with the Windows client it would have been all over the forums minutes after the launch not a week after.
Jump to: