Topic: [WDC] Worldcoin | 3.0 Flirtatious Ant Released! | Multicoin architecture - page 28. (Read 442449 times)

Quote from: GreatOrchid on July 19, 2016, 05:56:20 PM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

...

\\...

...

Sorry friend, are you asking something?

energocoin

newbie

Activity: 17

Merit: 0

Quote from: GreatOrchid on July 17, 2016, 07:03:03 PM

Quote from: energocoin on July 14, 2016, 05:53:27 AM

Quote from: GreatOrchid on July 17, 2016, 07:03:03 PM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet.

\\that made the wallet work?

i tryed this it didnt link up cloud servce
i guess its thinking lol
will check back

Hello,thanks for all informations,just didnt have time to write back,i made my wallet work with your instructions,but i have now another problem,i have 0 connections,i have added all nodes,but there is still no connection.Any advice,thank you.

GreatOrchid

legendary

Activity: 1092

Merit: 1001

Quote from: energocoin on July 14, 2016, 05:53:27 AM

Quote from: GreatOrchid on July 17, 2016, 07:03:03 PM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet.

\\that made the wallet work?

i tryed this it didnt link up cloud servce
i guess its thinking lol
will check back

Berzeck

full member

Activity: 238

Merit: 100

Quote from: energocoin on July 14, 2016, 05:53:27 AM

Quote from: energocoin on July 14, 2016, 05:53:27 AM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet.

\\that made the wallet work?

I am pretty sure it did

GreatOrchid

legendary

Activity: 1092

Merit: 1001

Quote from: Berzeck on July 11, 2016, 07:57:47 PM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet.

\\that made the wallet work?

GreatOrchid

legendary

Activity: 1092

Merit: 1001

Quote from: CryptoMaik on July 11, 2016, 02:04:01 PM

Can anyone publish a list of nodes.

Our wallet has 0 connections.

Thanks Wink

This takes care of the peer problem

http://forum.worldcoin.global/index.php?/topic/398-peers/
Obviously new seed nodes will be added on final release

Quote from: GreatOrchid on July 11, 2016, 06:22:34 PM

i tryed the brand new 3.o wallet and the android wallet i cant get anything to work wtf
if i cant get a wallet what good is it?

android wallet -> settings -> settings -> trusted peer
Add nodes: 78.141.116.239, 77.247.229.93

Please subscribe to our forum for up to date information

forum.worldcoin.global

only one peer is connected and it 8 months behind after 3 days did do squat forget the wallet i will use exchange on or try coin that has working wallets

Berzeck

full member

Activity: 238

Merit: 100

If you just made a copy then coins should be there, if you moved the file then yes you should copy it back
Most likely scenario is that DataDirectory is not the same as the one you posted here
so, you can close the wallet and Edit Daemons.cfg, edit DataDirectory to the correct directory

When was the last transaction you made?

energocoin

newbie

Activity: 17

Merit: 0

Quote from: Berzeck on July 14, 2016, 05:13:59 AM

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet.

Berzeck

full member

Activity: 238

Merit: 100

I found your problem
rpcpassword is missing in you daemon conf file.

The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg

Done!

energocoin

newbie

Activity: 17

Merit: 0

Everything seems fine there, i will wait for the log file
Another thing, while its running please open your task manager and search for a process called: WorldcoinDaemon.exe
(It should be running)

I dis send log files,no it is running only worldcoinpanel exe ,there is no worldcoindaemon.exe,at the starting of wallet it comes notification that program is not working,if i run it on my own hand it comes next notification,i have send a picture on last email with logs.Thank you

Berzeck

full member

Activity: 238

Merit: 100

Everything seems fine there, i will wait for the log file
Another thing, while its running please open your task manager and search for a process called: WorldcoinDaemon.exe
(It should be running)

energocoin

newbie

Activity: 17

Merit: 0

Quote from: Berzeck on July 14, 2016, 05:01:08 AM

Quote from: energocoin on July 14, 2016, 04:56:37 AM

Where do i send log files

Ok, this is what we are going to do
1) Let the wallet continue indexing (the screenshot you sent) , depending on the speed of your computer it can last many minutes
Ok,i did leave ti last day all day but it is still the same,but i will leave it again.

2) While it is indexing send me the log at [email protected]
There are couple of files with logs,do i send them all

3) Open file Daemons.cfg, and check that DataDirectory is pointing to the correct directory (this is the block chain directory)
This is written in the file i think is pointed to correct directory.
[WDC]
DataDirectory=C:\\Users\\Servis\\Documents\\WorldcoinChain
BinaryName=WorldcoinDaemon
User=Worldcoiner
Password=07Fvbtb$234vvrD56e
Port=11081
RpcPort=11082
PidFile=worldcoind.pid
LockFile=.lock
BalanceMinConfirmations=1
Enabled=1

Berzeck

full member

Activity: 238

Merit: 100

Quote from: energocoin on July 14, 2016, 04:56:37 AM

Where do i send log files

Ok, this is what we are going to do
1) Let the wallet continue indexing (the screenshot you sent) , depending on the speed of your computer it can last many minutes
2) While it is indexing send me the log at [email protected]
3) Open file Daemons.cfg, and check that DataDirectory is pointing to the correct directory (this is the block chain directory)

energocoin

newbie

Activity: 17

Merit: 0

Quote from: energocoin on July 14, 2016, 04:50:17 AM

Quote from: energocoin on July 14, 2016, 04:37:57 AM

I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

For nodes please check this thread
http://forum.worldcoin.global/index.php?/topic/398-peers/

It comes with instructions on how exactly you can add a node

Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe)

https://worldcoin.global/worldcoinbc-3-0-beta2-released/

Sorry for stupid question,how do i add nodes,thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

add new nodes

Quote from: worldcoinunited on July 13, 2016, 12:33:41 AM

Hi,

new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY

WorldcoinUnited TEAM

Ok,here is an imagehttp://imgur.com/dJmqjFq

Where do i send log files

energocoin

newbie

Activity: 17

Merit: 0

Quote from: energocoin on July 14, 2016, 04:37:57 AM

I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

For nodes please check this thread
http://forum.worldcoin.global/index.php?/topic/398-peers/

It comes with instructions on how exactly you can add a node

Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe)

https://worldcoin.global/worldcoinbc-3-0-beta2-released/

Sorry for stupid question,how do i add nodes,thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

add new nodes

Quote from: worldcoinunited on July 13, 2016, 12:33:41 AM

Hi,

new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY

WorldcoinUnited TEAM

Ok,here is an imagehttp://imgur.com/dJmqjFq

Berzeck

full member

Activity: 238

Merit: 100

Quote from: energocoin on July 14, 2016, 04:37:57 AM

I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

For nodes please check this thread
http://forum.worldcoin.global/index.php?/topic/398-peers/

It comes with instructions on how exactly you can add a node

Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe)

https://worldcoin.global/worldcoinbc-3-0-beta2-released/

Sorry for stupid question,how do i add nodes,thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

add new nodes

Use imgur.com service and upload a picture there, then you can link the url in this thread. Also I will need a file called worldcoinbc.log or similar located in the main directory

Berzeck

full member

Activity: 238

Merit: 100

Quote from: rindo on July 14, 2016, 04:37:33 AM

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

For nodes please check this thread
http://forum.worldcoin.global/index.php?/topic/398-peers/

It comes with instructions on how exactly you can add a node

Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe)

https://worldcoin.global/worldcoinbc-3-0-beta2-released/

apreciate thanks in advance

actually i dont know much about Worldcoin,but im interested for bought this coin
looking for new news Wink

You are welcome my friend!
You can subscribe to our forum forum.worldcoin.global to be completely informed with new releases!

energocoin

newbie

Activity: 17

Merit: 0

I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

For nodes please check this thread
http://forum.worldcoin.global/index.php?/topic/398-peers/

It comes with instructions on how exactly you can add a node

Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe)

https://worldcoin.global/worldcoinbc-3-0-beta2-released/

Sorry for stupid question,how do i add nodes,thank you.

Quote from: energocoin on July 14, 2016, 04:14:17 AM

Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.

add new nodes

Quote from: worldcoinunited on July 13, 2016, 12:33:41 AM

Hi,

new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY

WorldcoinUnited TEAM

rindo

hero member

Activity: 938

Merit: 1000