Topic: What is your average kH/s? (Read 2336 times)
Only 150kh/s here, sadly.. Pretty much everything takes time. Either going to rent or upgrade my card.
I have two R9 290X and they do around 680 KH/sec. Shouldn't they get more?
Almost any configuration I try gets HW errors. Right now I have intensity 14, worksize 512, thread-concurrency 16384, gpu-engine 1025, gpu-memclock 1350, gpu-powertune 20, gpu-threads 2.
Code:
GPU 0: | 666.7K/677.7Kh/s | A:8913664 R:9472 HW:0 WU: 618.7/m I:14
GPU 1: | 705.2K/695.9Kh/s | A:9243392 R:7168 HW:0 WU: 641.4/m I:14
GPU 1: | 705.2K/695.9Kh/s | A:9243392 R:7168 HW:0 WU: 641.4/m I:14
Almost any configuration I try gets HW errors. Right now I have intensity 14, worksize 512, thread-concurrency 16384, gpu-engine 1025, gpu-memclock 1350, gpu-powertune 20, gpu-threads 2.
880kh/s
well some of you guys must be doing gr8, while i'm saving up for a new card:
my asus hd 5670 can deliver 80-100 khps, and when i add in the amd phenomII x3 @ 2.8, add about 11 khps (or makes a good scout)
but if i use both, i can get a steady 100
Hi,
I use 2 280x Graphiccards
At the moment I have maxed them out but I haven't tweaked anything, they are doing 730 KHash each
I'm thinking of getting a couple of extra GPUs but then I need to upgrade my motherboard aswell ^^
Although I do got some great money from the Earthcoin jump, so 2 or 3 more 280s would be possible
I use 2 280x Graphiccards
At the moment I have maxed them out but I haven't tweaked anything, they are doing 730 KHash each
I'm thinking of getting a couple of extra GPUs but then I need to upgrade my motherboard aswell ^^
Although I do got some great money from the Earthcoin jump, so 2 or 3 more 280s would be possible
Well if you got over 250 you should be racking in the dough!!
225000 KH/s
Stored @ own datacenter - 99.95% uptime last year
Stored @ own datacenter - 99.95% uptime last year
1400kh/s
Around 300 KH/s. Not very much 
Averaging around 480 Kh/s with a Sapphire R9 270x, seems to be the most I can squeeze out of it...
My setting for anyone interested:
"api-listen" : true,
"intensity" : "19",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"auto-fan" : true,
"temp-cutoff" : "85",
"temp-overheat" : "75",
"temp-target" : "70",
"scrypt" : true,
"thread-concurrency" : "15508",
"gpu-thread" : "1",
"gpu-engine" : "1135",
"lookup-gap" : "2",
"gpu-powertune" : "0",
"gpu-memclock" : "1500"
My setting for anyone interested:
"api-listen" : true,
"intensity" : "19",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"auto-fan" : true,
"temp-cutoff" : "85",
"temp-overheat" : "75",
"temp-target" : "70",
"scrypt" : true,
"thread-concurrency" : "15508",
"gpu-thread" : "1",
"gpu-engine" : "1135",
"lookup-gap" : "2",
"gpu-powertune" : "0",
"gpu-memclock" : "1500"
450 kH/s 
Damn you Nvidia
Damn you Nvidia
Around 630 KH/s with two evga.
With a 760GTX mine at 266kH/s and a bit more with some slight overclocking.
evga 600KH/s with Gigabyte HD 7950, temp 60C, 4101 RPM.
this is my config.
--Nfmin 4 --Nfmax 30 --StartT 1387769316 --gpu-engine 1100 --gpu-memclock 1500 -I 19 -g 1 -w 512 --thread-concurrency 20000 --lookup-gap 2 --no-submit-stale --gpu-fan 80
this is my config.
--Nfmin 4 --Nfmax 30 --StartT 1387769316 --gpu-engine 1100 --gpu-memclock 1500 -I 19 -g 1 -w 512 --thread-concurrency 20000 --lookup-gap 2 --no-submit-stale --gpu-fan 80
mine are
7970: 625kh/s 900mhz core 1375mhz mem 70c temp
--intensity 13 --shaders 2048 --thread-concurrency 8192 -g 2 --lookup-gap 2 --vectors 1 --temp-cutoff 80
6950: 330kh/s 870mhz core 1250mhz mem 60c temp
--intensity 13 --shaders 1408 --thread-concurrency 6144 -g 1 --lookup-gap 2 --vectors 1 --temp-cutoff 80
Fx-4100: about 500kh/s on quark, 4.4Ghz core clock 40c temp
System spec:
CPU fx-4100, 4.4GHz x22 multi 40c full load (Corsair H40 CPU cooler)
Mobo: Asus m5a97 Evo 38c temp
Bus speed: 200mhz
FSB 2200mhz
NB: 2400mhz
Mem: 16gb 1600mhz 11-11-11-32
Primary hard drive: 128GB PCI-E SSD Raid 0
PSU: Corsair GS700 (700watt)
7970: 625kh/s 900mhz core 1375mhz mem 70c temp
--intensity 13 --shaders 2048 --thread-concurrency 8192 -g 2 --lookup-gap 2 --vectors 1 --temp-cutoff 80
6950: 330kh/s 870mhz core 1250mhz mem 60c temp
--intensity 13 --shaders 1408 --thread-concurrency 6144 -g 1 --lookup-gap 2 --vectors 1 --temp-cutoff 80
Fx-4100: about 500kh/s on quark, 4.4Ghz core clock 40c temp
System spec:
CPU fx-4100, 4.4GHz x22 multi 40c full load (Corsair H40 CPU cooler)
Mobo: Asus m5a97 Evo 38c temp
Bus speed: 200mhz
FSB 2200mhz
NB: 2400mhz
Mem: 16gb 1600mhz 11-11-11-32
Primary hard drive: 128GB PCI-E SSD Raid 0
PSU: Corsair GS700 (700watt)
Thanks for sharing your settings, but even matching yours I can't get pass 500... It might be the fact that the system is an old workstation with an Nvidia Quadro FX5800 (Currently not being used for mining) but I guess there might be some conflict there...
Around 330 KH/s with a 5850 and a 5570 together. Nothing overclocked so far and using the 5850 in my main computer so intensity @12 most of the time.
buncha different cards...mining at 4000khs
evga 770gtx at 247 khash/s mining scrypt, bitcoin mining I get around 280 mhash/s
600kh/s with a MSI twinfrorz iii 7950
2 x R9 290X
1.7 Mhash if i do -I 20
but their are loud as fuck, need to move on to a watercooled pc that would be great
1.7 Mhash if i do -I 20
but their are loud as fuck, need to move on to a watercooled pc that would be great
Jump to: