Pages:
Author

Topic: What's your Crytonight V7 hash rate? - page 2. (Read 4636 times)

jr. member
Activity: 208
Merit: 3
June 25, 2018, 11:14:31 AM
#93
looking for RX550 4GB samsung RAM hashrate...
~450 h/s
jr. member
Activity: 69
Merit: 1
June 25, 2018, 10:54:32 AM
#92
results from the pool for 24hrs
Fx 8350 324hs
I7 4770k 180hs
both using xmrstak
 

Hmm, My 4770k gives me 290-310 h/s with XMR-stak.  Running a mild OC (3.9Ghz) with stock voltage.  How many threads are you using?  4 is optimal due to the 8 MB L3 cache.
hero member
Activity: 2170
Merit: 612
Online Security & Investment Corporation
June 25, 2018, 10:41:59 AM
#91
looking for RX550 4GB samsung RAM hashrate...
newbie
Activity: 36
Merit: 0
June 23, 2018, 06:22:38 AM
#90
results from the pool for 24hrs
Fx 8350 324hs
I7 4770k 180hs
both using xmrstak
 
jr. member
Activity: 208
Merit: 3
June 23, 2018, 06:08:03 AM
#89
RX550 ~450 h/s
RX460/RX560 ~500 h/s
RX470/RX480/RX570/RX580 ~1000 h/s
all must have 1750/2000 MHz RAM, not the 1500 MHz RAM
hero member
Activity: 2170
Merit: 612
Online Security & Investment Corporation
June 23, 2018, 05:37:00 AM
#88


This is SRBMiner-CN mining Stellite (CNv7) with Robinhood's blockchain drivers for Win 7-64, Sapphire RX 470 Nitro+ 8Gb (Samsung) at 1260/2000, auto intensity, worksize 8, threads 2.  GPUs are modded with something that is close to Ubermix 3.1.

PBE 2.2 one click bios Ubermix 3.1.1
RX570 nitro+ 4GB -  samsung - win10
1.8.2 adrenalin driver - compute mode
1276/1900 = 981 h/s
jr. member
Activity: 69
Merit: 1
June 22, 2018, 08:08:41 AM
#87
I recently switch from XMR-stak to SRBminer for my GPUs because I was getting a lot of rejected shares on Nicehash. Rejected shares dropped from 5-6% to 0.1%, and I got a nice bump in hashrate. My Vega56 went from 1980 to 2050 h/s and 1/2 my RX570s went from 900 to 950 (the othe half are a different brand/memory and stayed at 900). 
sr. member
Activity: 994
Merit: 278
June 22, 2018, 03:07:13 AM
#86
My Vega56 runs with Cast XMR and Blockchaindriver stable @ 1950 H/s

About the same here. Though recently Cast XMR has started jamming up quite a few times per day. Could be the summer Cheesy
sr. member
Activity: 518
Merit: 250
June 21, 2018, 11:52:57 PM
#85
I got two 580 rx cards, 650 hash/sec each.
And then i got a 1800x ryzen that does around 400 hashes / sec. Does this sound right to you guys? It feels abit low, but i have not clocked or changed memory timings or anything.
newbie
Activity: 1
Merit: 0
June 21, 2018, 03:51:34 PM
#84
i have 2x rx570 red devil chip elpida and works 1.2khs is very low somebody help me.... i use nice has... sorry for the bad english....
full member
Activity: 144
Merit: 100
June 18, 2018, 09:13:45 AM
#83
1x rx480 8gb + 2 rx580 8gb
930h/s each card

i7 4790  max 310h/s

all system pulling 360w from the wall

on pool showing (cpu+gpu) from 2000-5000h/s with average 2.87kh

Could you share your config to get 930h on the rx480?
jr. member
Activity: 69
Merit: 1
June 07, 2018, 07:51:18 AM
#82

It was short lived.
ETN profitability spiked for a few hours after the difficulty algo finally adjusted to the new lower hashrate post fork.

Now it's stabilised around the same level as most other CNv7 coins.

Yeah, my payout rate went way down last night around 5 pm, but has been going up again the last few hours.  I would keep an eye on it today.  Still more profitable than mining on nanopool at the moment, just not double Wink
hero member
Activity: 1274
Merit: 556
June 07, 2018, 07:43:46 AM
#81


Nicehash is paying out huge right now!

I have a 280x in my Mac Pro, but mining/tuning software is  pretty limited on that platform, so it just sits idle.

not quiet sure about this, I tried mining with NH for a few hours and estimated earnings is too far from whattomine calculations with same hashrates

decided to pull  out back my rigs again from NH
It was short lived.
ETN profitability spiked for a few hours after the difficulty algo finally adjusted to the new lower hashrate post fork.

Now it's stabilised around the same level as most other CNv7 coins.
sr. member
Activity: 1008
Merit: 297
Grow with community
June 07, 2018, 07:36:31 AM
#80


Nicehash is paying out huge right now!

I have a 280x in my Mac Pro, but mining/tuning software is  pretty limited on that platform, so it just sits idle.

not quiet sure about this, I tried mining with NH for a few hours and estimated earnings is too far from whattomine calculations with same hashrates

decided to pull  out back my rigs again from NH
newbie
Activity: 64
Merit: 0
June 07, 2018, 07:13:53 AM
#79
Why no love for probably the best mining GPU of all time, the Tahiti's (Radeon 7950/7970/280x) ?

I get like 600h/s with 1050/1650 @ 975mV ( about 125 watt from wall)

I used to mine LTC with these back in the day when they pulled like 350 Watt from the wall, each!

Much love for the Haiti here Cheesy  Mine are on 900/1500 with 0.931v , doing around 500 each with claymore, with Srbminer i got lower results , what miner do you guys use for Tahitis ?
member
Activity: 104
Merit: 10
June 07, 2018, 06:52:11 AM
#78
running at steady 2200h/s with 18.4.1 memory @1140 on vega fe with open loop water block, could go higher but haven't had time to fiddle yet. using xmr-stak, cast gave about 200h/s so gave up on that
legendary
Activity: 3808
Merit: 1723
June 07, 2018, 04:42:37 AM
#77
Why no love for probably the best mining GPU of all time, the Tahiti's (Radeon 7950/7970/280x) ?

I get like 600h/s with 1050/1650 @ 975mV ( about 125 watt from wall)

I used to mine LTC with these back in the day when they pulled like 350 Watt from the wall, each!

I have quite expensive electricity, so I only run them at 800MHz at 900mV.

I don't think I could even have mine go that low. Seems 950mV is the lowest, you can't even put in 900mV in VBE it automatically raises it to 950mV.

What speeds are you getting @ 800MHz/900mV ? What power usage from wall?








Why no love for probably the best mining GPU of all time, the Tahiti's (Radeon 7950/7970/280x) ?

I get like 600h/s with 1050/1650 @ 975mV ( about 125 watt from wall)

I used to mine LTC with these back in the day when they pulled like 350 Watt from the wall, each!

Is it more profitable to mine v7 than ZEC for the 7970?


Currently they are about equal but CN uses much less electricity.
full member
Activity: 336
Merit: 102
June 07, 2018, 04:18:39 AM
#76
Actually im mining with six RX580 on my mining rig. I have a hashrate of 4300~. When i look at whattomine i shoulld have some more. So know im trying to find out whats my problem, why the hashes are so low. Anybody an idea? I have the newest drivers!
newbie
Activity: 62
Merit: 0
June 07, 2018, 04:09:32 AM
#75
Why no love for probably the best mining GPU of all time, the Tahiti's (Radeon 7950/7970/280x) ?

I get like 600h/s with 1050/1650 @ 975mV ( about 125 watt from wall)

I used to mine LTC with these back in the day when they pulled like 350 Watt from the wall, each!

Is it more profitable to mine v7 than ZEC for the 7970?
newbie
Activity: 68
Merit: 0
June 07, 2018, 04:03:15 AM
#74
Why no love for probably the best mining GPU of all time, the Tahiti's (Radeon 7950/7970/280x) ?

I get like 600h/s with 1050/1650 @ 975mV ( about 125 watt from wall)

I used to mine LTC with these back in the day when they pulled like 350 Watt from the wall, each!

I have quite expensive electricity, so I only run them at 800MHz at 900mV.
Pages:
Jump to: