Pages:
Author

Topic: What's your Crytonight V7 hash rate? - page 5. (Read 4628 times)

jr. member
Activity: 94
Merit: 1
April 08, 2018, 11:15:06 AM
#33
xmr-stak-v2.4.1-cuda8 (SMOS)
9x 1060 3GB 4923H/s (about 547 each at 80w, 150 core 1500 memory)
I'm probably optimizing it a bit wrong, but it's still more profitable than equihash at the same settings now (cards runs about 7 C colder than on equihash for some reason).
member
Activity: 443
Merit: 13
April 08, 2018, 11:12:02 AM
#32
Damn one of my cards is dying out on this new algo, otherwise, the rest of my rx580 are hashing 880h/s with 1140/2200 900 voltage.
member
Activity: 277
Merit: 23
April 08, 2018, 10:58:16 AM
#31
5560 H/s with 6x RX570 4gb Pulse

XMR-STAK 2.4.2

settings in amd.txt, 2 thread, intensity 896 for each card

example:

// gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 0,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
  },
  // gpu: Ellesmere memory:3712
  // compute units: 32
  { "index" : 0,
    "intensity" : 896, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
    "comp_mode" : true
member
Activity: 644
Merit: 24
April 08, 2018, 10:27:48 AM
#30
XMR-Stak 2.3.0

6 Vega 56's - 11,300 - 11,500 h/s
full member
Activity: 602
Merit: 106
April 08, 2018, 09:48:29 AM
#29
5X R9 290 rig 4.1kH/s (ca 850h/s per card). Could probably squeeze out a bit more but don't see any reasonable reason to do so.

What is the core/memory clock? Is that special BIOS? What miner software?

Claymore Cryptonote V11.3
Yes, using R9 390X BIOS. Can find from here http://www.overclock.net/forum/67-amd-ati/1564219-modded-r9-390x-bios-r9-290-290x-updated-02-16-2016-a.html

Core 1125
Mem 1250
full member
Activity: 140
Merit: 100
April 08, 2018, 09:37:42 AM
#28
5X R9 290 rig 4.1kH/s (ca 850h/s per card). Could probably squeeze out a bit more but don't see any reasonable reason to do so.

What is the core/memory clock? Is that special BIOS? What miner software?
full member
Activity: 364
Merit: 106
ONe Social Network.
April 08, 2018, 09:25:14 AM
#27
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.


beeeeeeeep wrong answer
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
April 08, 2018, 09:13:09 AM
#26
For some reason WTM removed XMR from the front page to compare with other coins. This is the calculator I'm using.

https://crypt0.zone/calculator

They re-added earlier today.
hero member
Activity: 1036
Merit: 606
April 08, 2018, 09:04:22 AM
#25
For some reason WTM removed XMR from the front page to compare with other coins. This is the calculator I'm using.

https://crypt0.zone/calculator
member
Activity: 476
Merit: 19
April 08, 2018, 08:59:44 AM
#24
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.

that's easy to answer:

go to whattomine and make comparison for gpu

it say: ethereum is better by far.

in reality if you take Monero for example: the difficulty is   33180320682, compared to 129999999 whatto mine used yesterday and 1599999999 it was before the fork happened.

so go to monero on WTM, under coin, insert the REAL difficult and make the calculation again and you will see by yourself.

that's true for ALL the coin that forked. Monero hashrate was 1.300 Mhs and its now 276. Go figure how many BOTnet and Asic was mining...
hero member
Activity: 1036
Merit: 606
April 08, 2018, 08:56:54 AM
#23
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.

After the fork and the difficulty adjusted, profitability on XMR went up ~4x. At the current price and difficulty 800 H/s is ~$1.25/day in profit after power.

https://crypt0.zone/calculator/details/XMR?hr=800&pwr=110&ec=0.12&fee=3&cur=USD&average=3h&exchange=0
full member
Activity: 602
Merit: 106
April 08, 2018, 08:55:39 AM
#22
5X R9 290 rig 4.1kH/s (ca 850h/s per card). Could probably squeeze out a bit more but don't see any reasonable reason to do so.
member
Activity: 108
Merit: 11
April 08, 2018, 08:37:58 AM
#21
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.

My RX 580 only gets 19.2MH/sec on ETH as Its on a stock bios (I use it for gaming)
With a slight Wattman overclock on the VRAM it gets 700H/sec with Claymore.
sr. member
Activity: 1008
Merit: 297
Grow with community
April 08, 2018, 08:34:39 AM
#20
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.

Yep, I guess you missing something, eth doesn't want to fork just for ASICs

https://www.reddit.com/r/EtherMining/comments/8aa64j/eth_core_devs_have_decided_not_to_emergency_hard/

so the difficulty will still remain and will continue to increase

bye on eth mining for now
newbie
Activity: 2
Merit: 158
April 08, 2018, 08:15:41 AM
#19
I got the same hashrate on crryptonightv7, around 20% less on cryptonightheavy
This sounds reasonable, it's the same I am seeing.

--ypsi
full member
Activity: 280
Merit: 102
April 08, 2018, 08:18:54 AM
#19
Why are some people mining cryptonight v7 with rx 4XX/5XX series cards? Not sure if i'm missing something but isn't ETH still the more profitable coin to mine? Just because the fork happened it does guarantee that it will be more profitable.
newbie
Activity: 2
Merit: 0
April 08, 2018, 08:12:07 AM
#18
I am getting around 930H/s with my threadripper 1950x on CrytoNightV7 via xmr.  I was getting over 1200H/s before the update.  Anyone know what I can do to get my hash rate back up to 1200?

I have large pages enabled and I am setting my CPU affinity.    
newbie
Activity: 3
Merit: 0
April 08, 2018, 01:56:28 AM
#17
Threadripper 1950X - 930-945H/s (VM on low priority)
member
Activity: 75
Merit: 11
April 08, 2018, 01:40:27 AM
#16
[email protected] 300-320H/s
[email protected] 190-240H/s {no idea why this once bounces so much
[email protected] 160-180H/s
newbie
Activity: 284
Merit: 0
April 08, 2018, 12:54:44 AM
#15
I got the same hashrate on crryptonightv7, around 20% less on cryptonightheavy
Pages:
Jump to: